/**
@verbatim

Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.

	ADDI-DATA GmbH
	Dieselstrasse 3
	D-77833 Ottersweier
	Tel: +19(0)7223/9493-0
	Fax: +49(0)7223/9493-92
	http://www.addi-data.com
	info@addi-data.com

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

You should also find the complete GPL in the COPYING file accompanying this source code.

@endverbatim
*/
/*

  +-----------------------------------------------------------------------+
  | (C) ADDI-DATA GmbH          Dieselstraße 3       D-77833 Ottersweier  |
  +-----------------------------------------------------------------------+
  | Tel : +49 (0) 7223/9493-0     | email    : info@addi-data.com         |
  | Fax : +49 (0) 7223/9493-92    | Internet : http://www.addi-data.com   |
  +-------------------------------+---------------------------------------+
  | Project     : APCI-3200       | Compiler   : GCC                      |
  | Module name : hwdrv_apci3200.c| Version    : 2.96                     |
  +-------------------------------+---------------------------------------+
  | Project manager: Eric Stolz   | Date       :  02/12/2002              |
  +-------------------------------+---------------------------------------+
  | Description :   Hardware Layer Access For APCI-3200                   |
  +-----------------------------------------------------------------------+
  |                             UPDATES                                   |
  +----------+-----------+------------------------------------------------+
  |   Date   |   Author  |          Description of updates                |
  +----------+-----------+------------------------------------------------+
  | 02.07.04 | J. Krauth | Modification from the driver in order to       |
  |          |           | correct some errors when using several boards. |
  |          |           |                                                |
  |          |           |                                                |
  +----------+-----------+------------------------------------------------+
  | 26.10.04 | J. Krauth | - Update for COMEDI 0.7.68                     |
  |          |           | - Read eeprom value                            |
  |          |           | - Append APCI-3300                             |
  +----------+-----------+------------------------------------------------+
*/

/*
  +----------------------------------------------------------------------------+
  |                               Included files                               |
  +----------------------------------------------------------------------------+
*/
#include "hwdrv_apci3200.h"
/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
#include "addi_amcc_S5920.h"
/* #define PRINT_INFO */

/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

/* BEGIN JK 06.07.04: Management of sevrals boards */
/*
  int i_CJCAvailable=1;
  int i_CJCPolarity=0;
  int i_CJCGain=2;/* changed from 0 to 2 */
  int i_InterruptFlag=0;
  int i_ADDIDATAPolarity;
  int i_ADDIDATAGain;
  int i_AutoCalibration=0;   /* : auto calibration */
  int i_ADDIDATAConversionTime;
  int i_ADDIDATAConversionTimeUnit;
  int i_ADDIDATAType;
  int i_ChannelNo;
  int i_ChannelCount=0;
  int i_ScanType;
  int i_FirstChannel;
  int i_LastChannel;
  int i_Sum=0;
  int i_Offset;
  unsigned int ui_Channel_num=0;
  static int i_Count=0;
  int i_Initialised=0;
  unsigned int ui_InterruptChannelValue[96]; /* Buffer */
*/
struct str_BoardInfos s_BoardInfos[100];	/*  100 will be the max number of boards to be used */
/* END JK 06.07.04: Management of sevrals boards */

/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

/*+----------------------------------------------------------------------------+*/
/*| Function   Name   : int i_AddiHeaderRW_ReadEeprom                          |*/
/*|                               (int    i_NbOfWordsToRead,                   |*/
/*|                                unsigned int dw_PCIBoardEepromAddress,             |*/
/*|                                unsigned short   w_EepromStartAddress,                |*/
/*|                                unsigned short * pw_DataRead)                          |*/
/*+----------------------------------------------------------------------------+*/
/*| Task              : Read word from the 5920 eeprom.                        |*/
/*+----------------------------------------------------------------------------+*/
/*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
/*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
/*+----------------------------------------------------------------------------+*/
/*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
/*+----------------------------------------------------------------------------+*/
/*| Return Value      : -                                                      |*/
/*+----------------------------------------------------------------------------+*/

int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
	unsigned int dw_PCIBoardEepromAddress,
	unsigned short w_EepromStartAddress, unsigned short *pw_DataRead)
{
	unsigned int dw_eeprom_busy = 0;
	int i_Counter = 0;
	int i_WordCounter;
	int i;
	unsigned char pb_ReadByte[1];
	unsigned char b_ReadLowByte = 0;
	unsigned char b_ReadHighByte = 0;
	unsigned char b_SelectedAddressLow = 0;
	unsigned char b_SelectedAddressHigh = 0;
	unsigned short w_ReadWord = 0;

	for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead;
		i_WordCounter++) {
		do {
			dw_eeprom_busy =
				inl(dw_PCIBoardEepromAddress +
				AMCC_OP_REG_MCSR);
			dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
		} while (dw_eeprom_busy == EEPROM_BUSY);

		for (i_Counter = 0; i_Counter < 2; i_Counter++) {
			b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;	/* Read the low 8 bit part */
			b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;	/* Read the high 8 bit part */

			/* Select the load low address mode */
			outb(NVCMD_LOAD_LOW,
				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
				3);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Load the low address */
			outb(b_SelectedAddressLow,
				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
				2);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Select the load high address mode */
			outb(NVCMD_LOAD_HIGH,
				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
				3);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Load the high address */
			outb(b_SelectedAddressHigh,
				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
				2);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Select the READ mode */
			outb(NVCMD_BEGIN_READ,
				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
				3);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Read data into the EEPROM */
			*pb_ReadByte =
				inb(dw_PCIBoardEepromAddress +
				AMCC_OP_REG_MCSR + 2);

			/* Wait on busy */
			do {
				dw_eeprom_busy =
					inl(dw_PCIBoardEepromAddress +
					AMCC_OP_REG_MCSR);
				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
			} while (dw_eeprom_busy == EEPROM_BUSY);

			/* Select the upper address part */
			if (i_Counter == 0)
				b_ReadLowByte = pb_ReadByte[0];
			else
				b_ReadHighByte = pb_ReadByte[0];


			/* Sleep */
			msleep(1);

		}
		w_ReadWord =
			(b_ReadLowByte | (((unsigned short)b_ReadHighByte) *
				256));

		pw_DataRead[i_WordCounter] = w_ReadWord;

		w_EepromStartAddress += 2;	/*  to read the next word */

	}			/*  for (...) i_NbOfWordsToRead */
	return 0;
}

/*+----------------------------------------------------------------------------+*/
/*| Function   Name   : void v_GetAPCI3200EepromCalibrationValue (void)        |*/
/*+----------------------------------------------------------------------------+*/
/*| Task              : Read calibration value from the APCI-3200 eeprom.      |*/
/*+----------------------------------------------------------------------------+*/
/*| Input Parameters  : -                                                      |*/
/*+----------------------------------------------------------------------------+*/
/*| Output Parameters : -                                                      |*/
/*+----------------------------------------------------------------------------+*/
/*| Return Value      : -                                                      |*/
/*+----------------------------------------------------------------------------+*/

void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
	struct str_BoardInfos *BoardInformations)
{
	unsigned short w_AnalogInputMainHeaderAddress;
	unsigned short w_AnalogInputComponentAddress;
	unsigned short w_NumberOfModuls = 0;
	unsigned short w_CurrentSources[2];
	unsigned short w_ModulCounter = 0;
	unsigned short w_FirstHeaderSize = 0;
	unsigned short w_NumberOfInputs = 0;
	unsigned short w_CJCFlag = 0;
	unsigned short w_NumberOfGainValue = 0;
	unsigned short w_SingleHeaderAddress = 0;
	unsigned short w_SingleHeaderSize = 0;
	unsigned short w_Input = 0;
	unsigned short w_GainFactorAddress = 0;
	unsigned short w_GainFactorValue[2];
	unsigned short w_GainIndex = 0;
	unsigned short w_GainValue = 0;

  /*****************************************/
  /** Get the Analog input header address **/
  /*****************************************/
	i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
		dw_PCIBoardEepromAddress, 0x116,	/* w_EepromStartAddress: Analog input header address */
		&w_AnalogInputMainHeaderAddress);

  /*******************************************/
  /** Compute the real analog input address **/
  /*******************************************/
	w_AnalogInputMainHeaderAddress = w_AnalogInputMainHeaderAddress + 0x100;

  /******************************/
  /** Get the number of moduls **/
  /******************************/
	i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
		dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02,	/* w_EepromStartAddress: Number of conponment */
		&w_NumberOfModuls);

	for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls;
		w_ModulCounter++) {
      /***********************************/
      /** Compute the component address **/
      /***********************************/
		w_AnalogInputComponentAddress =
			w_AnalogInputMainHeaderAddress +
			(w_FirstHeaderSize * w_ModulCounter) + 0x04;

      /****************************/
      /** Read first header size **/
      /****************************/
		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress,	/*  Address of the first header */
			&w_FirstHeaderSize);

		w_FirstHeaderSize = w_FirstHeaderSize >> 4;

      /***************************/
      /** Read number of inputs **/
      /***************************/
		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06,	/*  Number of inputs for the first modul */
			&w_NumberOfInputs);

		w_NumberOfInputs = w_NumberOfInputs >> 4;

      /***********************/
      /** Read the CJC flag **/
      /***********************/
		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08,	/*  CJC flag */
			&w_CJCFlag);

		w_CJCFlag = (w_CJCFlag >> 3) & 0x1;	/*  Get only the CJC flag */

      /*******************************/
      /** Read number of gain value **/
      /*******************************/
		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44,	/*  Number of gain value */
			&w_NumberOfGainValue);

		w_NumberOfGainValue = w_NumberOfGainValue & 0xFF;

      /***********************************/
      /** Compute single header address **/
      /***********************************/
		w_SingleHeaderAddress =
			w_AnalogInputComponentAddress + 0x46 +
			(((w_NumberOfGainValue / 16) + 1) * 2) +
			(6 * w_NumberOfGainValue) +
			(4 * (((w_NumberOfGainValue / 16) + 1) * 2));

      /********************************************/
      /** Read current sources value for input 1 **/
      /********************************************/
		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress, w_SingleHeaderAddress,	/* w_EepromStartAddress: Single header address */
			&w_SingleHeaderSize);

		w_SingleHeaderSize = w_SingleHeaderSize >> 4;

      /*************************************/
      /** Read gain factor for the module **/
      /*************************************/
		w_GainFactorAddress = w_AnalogInputComponentAddress;

		for (w_GainIndex = 0; w_GainIndex < w_NumberOfGainValue;
			w_GainIndex++) {
	  /************************************/
	  /** Read gain value for the module **/
	  /************************************/
			i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex),	/*  Gain value */
				&w_GainValue);

			BoardInformations->s_Module[w_ModulCounter].
				w_GainValue[w_GainIndex] = w_GainValue;

#             ifdef PRINT_INFO
			printk("\n Gain value = %d",
				BoardInformations->s_Module[w_ModulCounter].
				w_GainValue[w_GainIndex]);
#             endif

	  /*************************************/
	  /** Read gain factor for the module **/
	  /*************************************/
			i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex),	/*  Gain factor */
				w_GainFactorValue);

			BoardInformations->s_Module[w_ModulCounter].
				ul_GainFactor[w_GainIndex] =
				(w_GainFactorValue[1] << 16) +
				w_GainFactorValue[0];

#             ifdef PRINT_INFO
			printk("\n w_GainFactorValue [%d] = %lu", w_GainIndex,
				BoardInformations->s_Module[w_ModulCounter].
				ul_GainFactor[w_GainIndex]);
#             endif
		}

      /***************************************************************/
      /** Read current source value for each channels of the module **/
      /***************************************************************/
		for (w_Input = 0; w_Input < w_NumberOfInputs; w_Input++) {
	  /********************************************/
	  /** Read current sources value for input 1 **/
	  /********************************************/
			i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
				dw_PCIBoardEepromAddress,
				(w_Input * w_SingleHeaderSize) +
				w_SingleHeaderAddress + 0x0C, w_CurrentSources);

	  /************************************/
	  /** Save the current sources value **/
	  /************************************/
			BoardInformations->s_Module[w_ModulCounter].
				ul_CurrentSource[w_Input] =
				(w_CurrentSources[0] +
				((w_CurrentSources[1] & 0xFFF) << 16));

#             ifdef PRINT_INFO
			printk("\n Current sources [%d] = %lu", w_Input,
				BoardInformations->s_Module[w_ModulCounter].
				ul_CurrentSource[w_Input]);
#             endif
		}

      /***************************************/
      /** Read the CJC current source value **/
      /***************************************/
		i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
			dw_PCIBoardEepromAddress,
			(w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress +
			0x0C, w_CurrentSources);

      /************************************/
      /** Save the current sources value **/
      /************************************/
		BoardInformations->s_Module[w_ModulCounter].
			ul_CurrentSourceCJC =
			(w_CurrentSources[0] +
			((w_CurrentSources[1] & 0xFFF) << 16));

#          ifdef PRINT_INFO
		printk("\n Current sources CJC = %lu",
			BoardInformations->s_Module[w_ModulCounter].
			ul_CurrentSourceCJC);
#          endif
	}
}

int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
	unsigned int ui_Channel_num, unsigned int *CJCCurrentSource,
	unsigned int *ChannelCurrentSource, unsigned int *ChannelGainFactor)
{
	int i_DiffChannel = 0;
	int i_Module = 0;

#ifdef PRINT_INFO
	printk("\n Channel = %u", ui_Channel_num);
#endif

	/* Test if single or differential mode */
	if (s_BoardInfos[dev->minor].i_ConnectionType == 1) {
		/* if diff */

		if (ui_Channel_num <= 1)
			i_DiffChannel = ui_Channel_num, i_Module = 0;
		else if ((ui_Channel_num >= 2) && (ui_Channel_num <= 3))
			i_DiffChannel = ui_Channel_num - 2, i_Module = 1;
		else if ((ui_Channel_num >= 4) && (ui_Channel_num <= 5))
			i_DiffChannel = ui_Channel_num - 4, i_Module = 2;
		else if ((ui_Channel_num >= 6) && (ui_Channel_num <= 7))
			i_DiffChannel = ui_Channel_num - 6, i_Module = 3;

	} else {
		/*  if single */
		if ((ui_Channel_num == 0) || (ui_Channel_num == 1))
			i_DiffChannel = 0, i_Module = 0;
		else if ((ui_Channel_num == 2) || (ui_Channel_num == 3))
			i_DiffChannel = 1, i_Module = 0;
		else if ((ui_Channel_num == 4) || (ui_Channel_num == 5))
			i_DiffChannel = 0, i_Module = 1;
		else if ((ui_Channel_num == 6) || (ui_Channel_num == 7))
			i_DiffChannel = 1, i_Module = 1;
		else if ((ui_Channel_num == 8) || (ui_Channel_num == 9))
			i_DiffChannel = 0, i_Module = 2;
		else if ((ui_Channel_num == 10) || (ui_Channel_num == 11))
			i_DiffChannel = 1, i_Module = 2;
		else if ((ui_Channel_num == 12) || (ui_Channel_num == 13))
			i_DiffChannel = 0, i_Module = 3;
		else if ((ui_Channel_num == 14) || (ui_Channel_num == 15))
			i_DiffChannel = 1, i_Module = 3;
	}

	/* Test if thermocouple or RTD mode */
	*CJCCurrentSource =
		s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC;
#ifdef PRINT_INFO
	printk("\n CJCCurrentSource = %lu", *CJCCurrentSource);
#endif

	*ChannelCurrentSource =
		s_BoardInfos[dev->minor].s_Module[i_Module].
		ul_CurrentSource[i_DiffChannel];
#ifdef PRINT_INFO
	printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource);
#endif
	/*       } */
	/*    } */

	/* Channle gain factor */
	*ChannelGainFactor =
		s_BoardInfos[dev->minor].s_Module[i_Module].
		ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain];
#ifdef PRINT_INFO
	printk("\n ChannelGainFactor = %lu", *ChannelGainFactor);
#endif
	/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

	return 0;
}

/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadDigitalInput                       |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : Read  value  of the selected channel or port           |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int ui_NoOfChannels    : No Of Channels To read  for Port
  Channel Numberfor single channel
  |                     unsigned int data[0]            : 0: Read single channel
  1: Read port value
  data[1]              Port number
  +----------------------------------------------------------------------------+
  | Output Parameters :	--	data[0] :Read status value
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_Temp = 0;
	unsigned int ui_NoOfChannel = 0;
	ui_NoOfChannel = CR_CHAN(insn->chanspec);
	ui_Temp = data[0];
	*data = inl(devpriv->i_IobaseReserved);

	if (ui_Temp == 0) {
		*data = (*data >> ui_NoOfChannel) & 0x1;
	}			/* if  (ui_Temp==0) */
	else {
		if (ui_Temp == 1) {
			if (data[1] < 0 || data[1] > 1) {
				printk("\nThe port number is in error\n");
				return -EINVAL;
			}	/* if(data[1] < 0 || data[1] >1) */
			switch (ui_NoOfChannel) {

			case 2:
				*data = (*data >> (2 * data[1])) & 0x3;
				break;
			case 3:
				*data = (*data & 15);
				break;
			default:
				comedi_error(dev, " chan spec wrong");
				return -EINVAL;	/*  "sorry channel spec wrong " */

			}	/* switch(ui_NoOfChannels) */
		}		/* if  (ui_Temp==1) */
		else {
			printk("\nSpecified channel not supported \n");
		}		/* elseif  (ui_Temp==1) */
	}
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ConfigDigitalOutput                     |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,				 |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : Configures The Digital Output Subdevice.               |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev : Driver handle                     |
  |			  data[0]  :1  Memory enable
  0  Memory Disable
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error			 |
  |																	 |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{

	if ((data[0] != 0) && (data[0] != 1)) {
		comedi_error(dev,
			"Not a valid Data !!! ,Data should be 1 or 0\n");
		return -EINVAL;
	}			/* if  ( (data[0]!=0) && (data[0]!=1) ) */
	if (data[0]) {
		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
	}			/*  if  (data[0]) */
	else {
		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
	}			/* else if  (data[0]) */
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_WriteDigitalOutput                      |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,				 |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : writes To the digital Output Subdevice                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     struct comedi_subdevice *s     : Subdevice Pointer            |
  |                     struct comedi_insn *insn       : Insn Structure Pointer       |
  |                     unsigned int *data          : Data Pointer contains        |
  |                                          configuration parameters as below |
  |                     data[0]             :Value to output
  data[1]             : 0 o/p single channel
  1 o/p port
  data[2]             : port no
  data[3]             :0 set the digital o/p on
  1 set the digital o/p off
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error	     	 |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_Temp = 0, ui_Temp1 = 0;
	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
	if (devpriv->b_OutputMemoryStatus) {
		ui_Temp = inl(devpriv->i_IobaseAddon);

	}			/* if(devpriv->b_OutputMemoryStatus ) */
	else {
		ui_Temp = 0;
	}			/* if(devpriv->b_OutputMemoryStatus ) */
	if (data[3] == 0) {
		if (data[1] == 0) {
			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
			outl(data[0], devpriv->i_IobaseAddon);
		}		/* if(data[1]==0) */
		else {
			if (data[1] == 1) {
				switch (ui_NoOfChannel) {

				case 2:
					data[0] =
						(data[0] << (2 *
							data[2])) | ui_Temp;
					break;
				case 3:
					data[0] = (data[0] | ui_Temp);
					break;
				}	/* switch(ui_NoOfChannels) */

				outl(data[0], devpriv->i_IobaseAddon);
			}	/*  if(data[1]==1) */
			else {
				printk("\nSpecified channel not supported\n");
			}	/* else if(data[1]==1) */
		}		/* elseif(data[1]==0) */
	}			/* if(data[3]==0) */
	else {
		if (data[3] == 1) {
			if (data[1] == 0) {
				data[0] = ~data[0] & 0x1;
				ui_Temp1 = 1;
				ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
				ui_Temp = ui_Temp | ui_Temp1;
				data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
				data[0] = data[0] & ui_Temp;
				outl(data[0], devpriv->i_IobaseAddon);
			}	/* if(data[1]==0) */
			else {
				if (data[1] == 1) {
					switch (ui_NoOfChannel) {

					case 2:
						data[0] = ~data[0] & 0x3;
						ui_Temp1 = 3;
						ui_Temp1 =
							ui_Temp1 << 2 * data[2];
						ui_Temp = ui_Temp | ui_Temp1;
						data[0] =
							((data[0] << (2 *
									data
									[2])) ^
							0xf) & ui_Temp;

						break;
					case 3:
						break;

					default:
						comedi_error(dev,
							" chan spec wrong");
						return -EINVAL;	/*  "sorry channel spec wrong " */
					}	/* switch(ui_NoOfChannels) */

					outl(data[0], devpriv->i_IobaseAddon);
				}	/*  if(data[1]==1) */
				else {
					printk("\nSpecified channel not supported\n");
				}	/* else if(data[1]==1) */
			}	/* elseif(data[1]==0) */
		}		/* if(data[3]==1); */
		else {
			printk("\nSpecified functionality does not exist\n");
			return -EINVAL;
		}		/* if else data[3]==1) */
	}			/* if else data[3]==0) */
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadDigitalOutput                       |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : Read  value  of the selected channel or port           |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
  |                     unsigned int *data              : Data Pointer to read status  |
  data[0]                 :0 read single channel
  1 read port value
  data[1]                  port no

  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_Temp;
	unsigned int ui_NoOfChannel;
	ui_NoOfChannel = CR_CHAN(insn->chanspec);
	ui_Temp = data[0];
	*data = inl(devpriv->i_IobaseAddon);
	if (ui_Temp == 0) {
		*data = (*data >> ui_NoOfChannel) & 0x1;
	}			/*  if  (ui_Temp==0) */
	else {
		if (ui_Temp == 1) {
			if (data[1] < 0 || data[1] > 1) {
				printk("\nThe port selection is in error\n");
				return -EINVAL;
			}	/* if(data[1] <0 ||data[1] >1) */
			switch (ui_NoOfChannel) {
			case 2:
				*data = (*data >> (2 * data[1])) & 3;
				break;

			case 3:
				break;

			default:
				comedi_error(dev, " chan spec wrong");
				return -EINVAL;	/*  "sorry channel spec wrong " */
				break;
			}	/*  switch(ui_NoOfChannels) */
		}		/*  if  (ui_Temp==1) */
		else {
			printk("\nSpecified channel not supported \n");
		}		/*  else if (ui_Temp==1) */
	}			/*  else if  (ui_Temp==0) */
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ConfigAnalogInput                       |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : Configures The Analog Input Subdevice                  |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     struct comedi_subdevice *s     : Subdevice Pointer            |
  |                     struct comedi_insn *insn       : Insn Structure Pointer       |
  |                     unsigned int *data          : Data Pointer contains        |
  |                                          configuration parameters as below |
  |                                                                            |
  |					data[0]
  |                                               0:Normal AI                  |
  |                                               1:RTD                        |
  |                                               2:THERMOCOUPLE               |
  |				    data[1]            : Gain To Use                 |
  |                                                                            |
  |                           data[2]            : Polarity
  |                                                0:Bipolar                   |
  |                                                1:Unipolar                  |
  |															    	 |
  |                           data[3]            : Offset Range
  |                                                                            |
  |                           data[4]            : Coupling
  |                                                0:DC Coupling               |
  |                                                1:AC Coupling               |
  |                                                                            |
  |                           data[5]            :Differential/Single
  |                                                0:Single                    |
  |                                                1:Differential              |
  |                                                                            |
  |                           data[6]            :TimerReloadValue
  |                                                                            |
  |                           data[7]            :ConvertingTimeUnit
  |                                                                            |
  |                           data[8]             :0 Analog voltage measurement
  1 Resistance measurement
  2 Temperature measurement
  |                           data[9]            :Interrupt
  |                                              0:Disable
  |                                              1:Enable
  data[10]           :Type of Thermocouple
  |                          data[11]           : 0: single channel
  Module Number
  |
  |                          data[12]
  |                                             0:Single Read
  |                                             1:Read more channel
  2:Single scan
  |                                             3:Continous Scan
  data[13]          :Number of channels to read
  |                          data[14]          :RTD connection type
  :0:RTD not used
  1:RTD 2 wire connection
  2:RTD 3 wire connection
  3:RTD 4 wire connection
  |                                                                            |
  |                                                                            |
  |                                                                            |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{

	unsigned int ul_Config = 0, ul_Temp = 0;
	unsigned int ui_ChannelNo = 0;
	unsigned int ui_Dummy = 0;
	int i_err = 0;

	/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

#ifdef PRINT_INFO
	int i = 0, i2 = 0;
#endif
	/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/*  Initialize the structure */
	if (s_BoardInfos[dev->minor].b_StructInitialized != 1) {
		s_BoardInfos[dev->minor].i_CJCAvailable = 1;
		s_BoardInfos[dev->minor].i_CJCPolarity = 0;
		s_BoardInfos[dev->minor].i_CJCGain = 2;	/* changed from 0 to 2 */
		s_BoardInfos[dev->minor].i_InterruptFlag = 0;
		s_BoardInfos[dev->minor].i_AutoCalibration = 0;	/* : auto calibration */
		s_BoardInfos[dev->minor].i_ChannelCount = 0;
		s_BoardInfos[dev->minor].i_Sum = 0;
		s_BoardInfos[dev->minor].ui_Channel_num = 0;
		s_BoardInfos[dev->minor].i_Count = 0;
		s_BoardInfos[dev->minor].i_Initialised = 0;
		s_BoardInfos[dev->minor].b_StructInitialized = 1;

		/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		s_BoardInfos[dev->minor].i_ConnectionType = 0;
		/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

		/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		memset(s_BoardInfos[dev->minor].s_Module, 0,
			sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE]));

		v_GetAPCI3200EepromCalibrationValue(devpriv->i_IobaseAmcc,
			&s_BoardInfos[dev->minor]);

#ifdef PRINT_INFO
		for (i = 0; i < MAX_MODULE; i++) {
			printk("\n s_Module[%i].ul_CurrentSourceCJC = %lu", i,
				s_BoardInfos[dev->minor].s_Module[i].
				ul_CurrentSourceCJC);

			for (i2 = 0; i2 < 5; i2++) {
				printk("\n s_Module[%i].ul_CurrentSource [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_CurrentSource[i2]);
			}

			for (i2 = 0; i2 < 8; i2++) {
				printk("\n s_Module[%i].ul_GainFactor [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_GainFactor[i2]);
			}

			for (i2 = 0; i2 < 8; i2++) {
				printk("\n s_Module[%i].w_GainValue [%i] = %u",
					i, i2,
					s_BoardInfos[dev->minor].s_Module[i].
					w_GainValue[i2]);
			}
		}
#endif
		/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
	}

	if (data[0] != 0 && data[0] != 1 && data[0] != 2) {
		printk("\nThe selection of acquisition type is in error\n");
		i_err++;
	}			/* if(data[0]!=0 && data[0]!=1 && data[0]!=2) */
	if (data[0] == 1) {
		if (data[14] != 0 && data[14] != 1 && data[14] != 2
			&& data[14] != 4) {
			printk("\n Error in selection of RTD connection type\n");
			i_err++;
		}		/* if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) */
	}			/* if(data[0]==1 ) */
	if (data[1] < 0 || data[1] > 7) {
		printk("\nThe selection of gain is in error\n");
		i_err++;
	}			/*  if(data[1]<0 || data[1]>7) */
	if (data[2] != 0 && data[2] != 1) {
		printk("\nThe selection of polarity is in error\n");
		i_err++;
	}			/* if(data[2]!=0 &&  data[2]!=1) */
	if (data[3] != 0) {
		printk("\nThe selection of offset range  is in error\n");
		i_err++;
	}			/*  if(data[3]!=0) */
	if (data[4] != 0 && data[4] != 1) {
		printk("\nThe selection of coupling is in error\n");
		i_err++;
	}			/* if(data[4]!=0 &&  data[4]!=1) */
	if (data[5] != 0 && data[5] != 1) {
		printk("\nThe selection of single/differential mode is in error\n");
		i_err++;
	}			/* if(data[5]!=0 &&  data[5]!=1) */
	if (data[8] != 0 && data[8] != 1 && data[2] != 2) {
		printk("\nError in selection of functionality\n");
	}			/* if(data[8]!=0 && data[8]!=1 && data[2]!=2) */
	if (data[12] == 0 || data[12] == 1) {
		if (data[6] != 20 && data[6] != 40 && data[6] != 80
			&& data[6] != 160) {
			printk("\nThe selection of conversion time reload value is in error\n");
			i_err++;
		}		/*  if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) */
		if (data[7] != 2) {
			printk("\nThe selection of conversion time unit  is in error\n");
			i_err++;
		}		/*  if(data[7]!=2) */
	}
	if (data[9] != 0 && data[9] != 1) {
		printk("\nThe selection of interrupt enable is in error\n");
		i_err++;
	}			/* if(data[9]!=0 &&  data[9]!=1) */
	if (data[11] < 0 || data[11] > 4) {
		printk("\nThe selection of module is in error\n");
		i_err++;
	}			/* if(data[11] <0 ||  data[11]>1) */
	if (data[12] < 0 || data[12] > 3) {
		printk("\nThe selection of singlechannel/scan selection is in error\n");
		i_err++;
	}			/* if(data[12] < 0 ||  data[12]> 3) */
	if (data[13] < 0 || data[13] > 16) {
		printk("\nThe selection of number of channels is in error\n");
		i_err++;
	}			/*  if(data[13] <0 ||data[13] >15) */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/*
	   i_ChannelCount=data[13];
	   i_ScanType=data[12];
	   i_ADDIDATAPolarity = data[2];
	   i_ADDIDATAGain=data[1];
	   i_ADDIDATAConversionTime=data[6];
	   i_ADDIDATAConversionTimeUnit=data[7];
	   i_ADDIDATAType=data[0];
	 */

	/*  Save acquisition configuration for the actual board */
	s_BoardInfos[dev->minor].i_ChannelCount = data[13];
	s_BoardInfos[dev->minor].i_ScanType = data[12];
	s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2];
	s_BoardInfos[dev->minor].i_ADDIDATAGain = data[1];
	s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6];
	s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7];
	s_BoardInfos[dev->minor].i_ADDIDATAType = data[0];
	/* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
	s_BoardInfos[dev->minor].i_ConnectionType = data[5];
	/* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
	/* END JK 06.07.04: Management of sevrals boards */

	/* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
	memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int));	/*  7 is the maximal number of channels */
	/* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */

	/* BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards */
	/* while(i_InterruptFlag==1) */
	while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) {
#ifndef MSXBOX
		udelay(1);
#else
		/*  In the case where the driver is compiled for the MSX-Box */
		/*  we used a printk to have a little delay because udelay */
		/*  seems to be broken under the MSX-Box. */
		/*  This solution hat to be studied. */
		printk("");
#endif
	}
	/* END JK 02.07.04 : This while can't be do, it block the process when using severals boards */

	ui_ChannelNo = CR_CHAN(insn->chanspec);	/*  get the channel */
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* i_ChannelNo=ui_ChannelNo; */
	/* ui_Channel_num =ui_ChannelNo; */

	s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo;
	s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo;

	/* END JK 06.07.04: Management of sevrals boards */

	if (data[5] == 0) {
		if (ui_ChannelNo < 0 || ui_ChannelNo > 15) {
			printk("\nThe Selection of the channel is in error\n");
			i_err++;
		}		/*  if(ui_ChannelNo<0 || ui_ChannelNo>15) */
	}			/* if(data[5]==0) */
	else {
		if (data[14] == 2) {
			if (ui_ChannelNo < 0 || ui_ChannelNo > 3) {
				printk("\nThe Selection of the channel is in error\n");
				i_err++;
			}	/*  if(ui_ChannelNo<0 || ui_ChannelNo>3) */
		}		/* if(data[14]==2) */
		else {
			if (ui_ChannelNo < 0 || ui_ChannelNo > 7) {
				printk("\nThe Selection of the channel is in error\n");
				i_err++;
			}	/*  if(ui_ChannelNo<0 || ui_ChannelNo>7) */
		}		/* elseif(data[14]==2) */
	}			/* elseif(data[5]==0) */
	if (data[12] == 0 || data[12] == 1) {
		switch (data[5]) {
		case 0:
			if (ui_ChannelNo >= 0 && ui_ChannelNo <= 3) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_Offset=0; */
				s_BoardInfos[dev->minor].i_Offset = 0;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(ui_ChannelNo >=0 && ui_ChannelNo <=3) */
			if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_Offset=64; */
				s_BoardInfos[dev->minor].i_Offset = 64;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(ui_ChannelNo >=4 && ui_ChannelNo <=7) */
			if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_Offset=128; */
				s_BoardInfos[dev->minor].i_Offset = 128;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(ui_ChannelNo >=8 && ui_ChannelNo <=11) */
			if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_Offset=192; */
				s_BoardInfos[dev->minor].i_Offset = 192;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(ui_ChannelNo >=12 && ui_ChannelNo <=15) */
			break;
		case 1:
			if (data[14] == 2) {
				if (ui_ChannelNo == 0) {
					/* BEGIN JK 06.07.04: Management of sevrals boards */
					/* i_Offset=0; */
					s_BoardInfos[dev->minor].i_Offset = 0;
					/* END JK 06.07.04: Management of sevrals boards */
				}	/* if(ui_ChannelNo ==0 ) */
				if (ui_ChannelNo == 1) {
					/* BEGIN JK 06.07.04: Management of sevrals boards */
					/* i_Offset=0; */
					s_BoardInfos[dev->minor].i_Offset = 64;
					/* END JK 06.07.04: Management of sevrals boards */
				}	/*  if(ui_ChannelNo ==1) */
				if (ui_ChannelNo == 2) {
					/* BEGIN JK 06.07.04: Management of sevrals boards */
					/* i_Offset=128; */
					s_BoardInfos[dev->minor].i_Offset = 128;
					/* END JK 06.07.04: Management of sevrals boards */
				}	/* if(ui_ChannelNo ==2 ) */
				if (ui_ChannelNo == 3) {
					/* BEGIN JK 06.07.04: Management of sevrals boards */
					/* i_Offset=192; */
					s_BoardInfos[dev->minor].i_Offset = 192;
					/* END JK 06.07.04: Management of sevrals boards */
				}	/* if(ui_ChannelNo ==3) */

				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_ChannelNo=0; */
				s_BoardInfos[dev->minor].i_ChannelNo = 0;
				/* END JK 06.07.04: Management of sevrals boards */
				ui_ChannelNo = 0;
				break;
			}	/* if(data[14]==2) */
			if (ui_ChannelNo >= 0 && ui_ChannelNo <= 1) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_Offset=0; */
				s_BoardInfos[dev->minor].i_Offset = 0;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(ui_ChannelNo >=0 && ui_ChannelNo <=1) */
			if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_ChannelNo=i_ChannelNo-2; */
				/* i_Offset=64; */
				s_BoardInfos[dev->minor].i_ChannelNo =
					s_BoardInfos[dev->minor].i_ChannelNo -
					2;
				s_BoardInfos[dev->minor].i_Offset = 64;
				/* END JK 06.07.04: Management of sevrals boards */
				ui_ChannelNo = ui_ChannelNo - 2;
			}	/* if(ui_ChannelNo >=2 && ui_ChannelNo <=3) */
			if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_ChannelNo=i_ChannelNo-4; */
				/* i_Offset=128; */
				s_BoardInfos[dev->minor].i_ChannelNo =
					s_BoardInfos[dev->minor].i_ChannelNo -
					4;
				s_BoardInfos[dev->minor].i_Offset = 128;
				/* END JK 06.07.04: Management of sevrals boards */
				ui_ChannelNo = ui_ChannelNo - 4;
			}	/* if(ui_ChannelNo >=4 && ui_ChannelNo <=5) */
			if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* i_ChannelNo=i_ChannelNo-6; */
				/* i_Offset=192; */
				s_BoardInfos[dev->minor].i_ChannelNo =
					s_BoardInfos[dev->minor].i_ChannelNo -
					6;
				s_BoardInfos[dev->minor].i_Offset = 192;
				/* END JK 06.07.04: Management of sevrals boards */
				ui_ChannelNo = ui_ChannelNo - 6;
			}	/* if(ui_ChannelNo >=6 && ui_ChannelNo <=7) */
			break;

		default:
			printk("\n This selection of polarity does not exist\n");
			i_err++;
		}		/* switch(data[2]) */
	}			/* if(data[12]==0 || data[12]==1) */
	else {
		switch (data[11]) {
		case 1:
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* i_Offset=0; */
			s_BoardInfos[dev->minor].i_Offset = 0;
			/* END JK 06.07.04: Management of sevrals boards */
			break;
		case 2:
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* i_Offset=64; */
			s_BoardInfos[dev->minor].i_Offset = 64;
			/* END JK 06.07.04: Management of sevrals boards */
			break;
		case 3:
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* i_Offset=128; */
			s_BoardInfos[dev->minor].i_Offset = 128;
			/* END JK 06.07.04: Management of sevrals boards */
			break;
		case 4:
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* i_Offset=192; */
			s_BoardInfos[dev->minor].i_Offset = 192;
			/* END JK 06.07.04: Management of sevrals boards */
			break;
		default:
			printk("\nError in module selection\n");
			i_err++;
		}		/*  switch(data[11]) */
	}			/*  elseif(data[12]==0 || data[12]==1) */
	if (i_err) {
		i_APCI3200_Reset(dev);
		return -EINVAL;
	}
	/* if(i_ScanType!=1) */
	if (s_BoardInfos[dev->minor].i_ScanType != 1) {
		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* i_Count=0; */
		/* i_Sum=0; */
		s_BoardInfos[dev->minor].i_Count = 0;
		s_BoardInfos[dev->minor].i_Sum = 0;
		/* END JK 06.07.04: Management of sevrals boards */
	}			/* if(i_ScanType!=1) */

	ul_Config =
		data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) |
		(data[4] << 9);
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* END JK 06.07.04: Management of sevrals boards */
  /*********************************/
	/* Write the channel to configure */
  /*********************************/
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); */
	outl(0 | ui_ChannelNo,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
	/* END JK 06.07.04: Management of sevrals boards */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* END JK 06.07.04: Management of sevrals boards */
  /**************************/
	/* Reset the configuration */
  /**************************/
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* outl(0 , devpriv->iobase+i_Offset + 0x0); */
	outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
	/* END JK 06.07.04: Management of sevrals boards */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* END JK 06.07.04: Management of sevrals boards */

  /***************************/
	/* Write the configuration */
  /***************************/
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* outl(ul_Config , devpriv->iobase+i_Offset + 0x0); */
	outl(ul_Config,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
	/* END JK 06.07.04: Management of sevrals boards */

  /***************************/
	/*Reset the calibration bit */
  /***************************/
	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* ul_Temp = inl(devpriv->iobase+i_Offset + 12); */
	ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
	/* END JK 06.07.04: Management of sevrals boards */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* END JK 06.07.04: Management of sevrals boards */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); */
	outl((ul_Temp & 0xFFF9FFFF),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
	/* END JK 06.07.04: Management of sevrals boards */

	if (data[9] == 1) {
		devpriv->tsk_Current = current;
		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* i_InterruptFlag=1; */
		s_BoardInfos[dev->minor].i_InterruptFlag = 1;
		/* END JK 06.07.04: Management of sevrals boards */
	}			/*  if(data[9]==1) */
	else {
		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* i_InterruptFlag=0; */
		s_BoardInfos[dev->minor].i_InterruptFlag = 0;
		/* END JK 06.07.04: Management of sevrals boards */
	}			/* else  if(data[9]==1) */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* i_Initialised=1; */
	s_BoardInfos[dev->minor].i_Initialised = 1;
	/* END JK 06.07.04: Management of sevrals boards */

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* if(i_ScanType==1) */
	if (s_BoardInfos[dev->minor].i_ScanType == 1)
		/* END JK 06.07.04: Management of sevrals boards */
	{
		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* i_Sum=i_Sum+1; */
		s_BoardInfos[dev->minor].i_Sum =
			s_BoardInfos[dev->minor].i_Sum + 1;
		/* END JK 06.07.04: Management of sevrals boards */

		insn->unused[0] = 0;
		i_APCI3200_ReadAnalogInput(dev, s, insn, &ui_Dummy);
	}

	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadAnalogInput                         |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read  value  of the selected channel			         |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |				data[0]  : Digital Value Of Input             |
  |				data[1]  : Calibration Offset Value           |
  |				data[2]  : Calibration Gain Value
  |				data[3]  : CJC value
  |				data[4]  : CJC offset value
  |				data[5]  : CJC gain value
  | Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
  |				data[6] : CJC current source from eeprom
  |				data[7] : Channel current source from eeprom
  |				data[8] : Channle gain factor from eeprom
  | End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_DummyValue = 0;
	int i_ConvertCJCCalibration;
	int i = 0;

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* if(i_Initialised==0) */
	if (s_BoardInfos[dev->minor].i_Initialised == 0)
		/* END JK 06.07.04: Management of sevrals boards */
	{
		i_APCI3200_Reset(dev);
		return -EINVAL;
	}			/* if(i_Initialised==0); */

#ifdef PRINT_INFO
	printk("\n insn->unused[0] = %i", insn->unused[0]);
#endif

	switch (insn->unused[0]) {
	case 0:

		i_APCI3200_Read1AnalogInputChannel(dev, s, insn,
			&ui_DummyValue);
		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */
		s_BoardInfos[dev->minor].
			ui_InterruptChannelValue[s_BoardInfos[dev->minor].
			i_Count + 0] = ui_DummyValue;
		/* END JK 06.07.04: Management of sevrals boards */

		/* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		i_APCI3200_GetChannelCalibrationValue(dev,
			s_BoardInfos[dev->minor].ui_Channel_num,
			&s_BoardInfos[dev->minor].
			ui_InterruptChannelValue[s_BoardInfos[dev->minor].
				i_Count + 6],
			&s_BoardInfos[dev->minor].
			ui_InterruptChannelValue[s_BoardInfos[dev->minor].
				i_Count + 7],
			&s_BoardInfos[dev->minor].
			ui_InterruptChannelValue[s_BoardInfos[dev->minor].
				i_Count + 8]);

#ifdef PRINT_INFO
		printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 6]);

		printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 7]);

		printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
#endif

		/* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
		if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
			&& (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
			/* END JK 06.07.04: Management of sevrals boards */
		{
			i_APCI3200_ReadCJCValue(dev, &ui_DummyValue);
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */
			s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[s_BoardInfos[dev->
					minor].i_Count + 3] = ui_DummyValue;
			/* END JK 06.07.04: Management of sevrals boards */
		}		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
		else {
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* ui_InterruptChannelValue[i_Count + 3]=0; */
			s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[s_BoardInfos[dev->
					minor].i_Count + 3] = 0;
			/* END JK 06.07.04: Management of sevrals boards */
		}		/* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */

		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
		if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE)
			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE))
			/* END JK 06.07.04: Management of sevrals boards */
		{
			i_APCI3200_ReadCalibrationOffsetValue(dev,
				&ui_DummyValue);
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */
			s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[s_BoardInfos[dev->
					minor].i_Count + 1] = ui_DummyValue;
			/* END JK 06.07.04: Management of sevrals boards */
			i_APCI3200_ReadCalibrationGainValue(dev,
				&ui_DummyValue);
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */
			s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[s_BoardInfos[dev->
					minor].i_Count + 2] = ui_DummyValue;
			/* END JK 06.07.04: Management of sevrals boards */
		}		/* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */

		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */
		if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
			&& (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
			/* END JK 06.07.04: Management of sevrals boards */
		{
	  /**********************************************************/
			/*Test if the Calibration channel must be read for the CJC */
	  /**********************************************************/
	  /**********************************/
			/*Test if the polarity is the same */
	  /**********************************/
			/* BEGIN JK 06.07.04: Management of sevrals boards */
			/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
			if (s_BoardInfos[dev->minor].i_CJCPolarity !=
				s_BoardInfos[dev->minor].i_ADDIDATAPolarity)
				/* END JK 06.07.04: Management of sevrals boards */
			{
				i_ConvertCJCCalibration = 1;
			}	/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
			else {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* if(i_CJCGain==i_ADDIDATAGain) */
				if (s_BoardInfos[dev->minor].i_CJCGain ==
					s_BoardInfos[dev->minor].i_ADDIDATAGain)
					/* END JK 06.07.04: Management of sevrals boards */
				{
					i_ConvertCJCCalibration = 0;
				}	/* if(i_CJCGain==i_ADDIDATAGain) */
				else {
					i_ConvertCJCCalibration = 1;
				}	/* elseif(i_CJCGain==i_ADDIDATAGain) */
			}	/* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
			if (i_ConvertCJCCalibration == 1) {
				i_APCI3200_ReadCJCCalOffset(dev,
					&ui_DummyValue);
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */
				s_BoardInfos[dev->minor].
					ui_InterruptChannelValue[s_BoardInfos
					[dev->minor].i_Count + 4] =
					ui_DummyValue;
				/* END JK 06.07.04: Management of sevrals boards */

				i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue);

				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */
				s_BoardInfos[dev->minor].
					ui_InterruptChannelValue[s_BoardInfos
					[dev->minor].i_Count + 5] =
					ui_DummyValue;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* if(i_ConvertCJCCalibration==1) */
			else {
				/* BEGIN JK 06.07.04: Management of sevrals boards */
				/* ui_InterruptChannelValue[i_Count+4]=0; */
				/* ui_InterruptChannelValue[i_Count+5]=0; */

				s_BoardInfos[dev->minor].
					ui_InterruptChannelValue[s_BoardInfos
					[dev->minor].i_Count + 4] = 0;
				s_BoardInfos[dev->minor].
					ui_InterruptChannelValue[s_BoardInfos
					[dev->minor].i_Count + 5] = 0;
				/* END JK 06.07.04: Management of sevrals boards */
			}	/* elseif(i_ConvertCJCCalibration==1) */
		}		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */

		/* BEGIN JK 06.07.04: Management of sevrals boards */
		/* if(i_ScanType!=1) */
		if (s_BoardInfos[dev->minor].i_ScanType != 1) {
			/* i_Count=0; */
			s_BoardInfos[dev->minor].i_Count = 0;
		}		/* if(i_ScanType!=1) */
		else {
			/* i_Count=i_Count +6; */
			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
			/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */
			s_BoardInfos[dev->minor].i_Count =
				s_BoardInfos[dev->minor].i_Count + 9;
			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		}		/* else if(i_ScanType!=1) */

		/* if((i_ScanType==1) &&(i_InterruptFlag==1)) */
		if ((s_BoardInfos[dev->minor].i_ScanType == 1)
			&& (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) {
			/* i_Count=i_Count-6; */
			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
			/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */
			s_BoardInfos[dev->minor].i_Count =
				s_BoardInfos[dev->minor].i_Count - 9;
			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		}
		/* if(i_ScanType==0) */
		if (s_BoardInfos[dev->minor].i_ScanType == 0) {
			/*
			   data[0]= ui_InterruptChannelValue[0];
			   data[1]= ui_InterruptChannelValue[1];
			   data[2]= ui_InterruptChannelValue[2];
			   data[3]= ui_InterruptChannelValue[3];
			   data[4]= ui_InterruptChannelValue[4];
			   data[5]= ui_InterruptChannelValue[5];
			 */
#ifdef PRINT_INFO
			printk("\n data[0]= s_BoardInfos [dev->minor].ui_InterruptChannelValue[0];");
#endif
			data[0] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[0];
			data[1] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[1];
			data[2] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[2];
			data[3] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[3];
			data[4] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[4];
			data[5] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[5];

			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
			/* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */
			i_APCI3200_GetChannelCalibrationValue(dev,
				s_BoardInfos[dev->minor].ui_Channel_num,
				&data[6], &data[7], &data[8]);
			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
		}
		break;
	case 1:

		for (i = 0; i < insn->n; i++) {
			/* data[i]=ui_InterruptChannelValue[i]; */
			data[i] =
				s_BoardInfos[dev->minor].
				ui_InterruptChannelValue[i];
		}

		/* i_Count=0; */
		/* i_Sum=0; */
		/* if(i_ScanType==1) */
		s_BoardInfos[dev->minor].i_Count = 0;
		s_BoardInfos[dev->minor].i_Sum = 0;
		if (s_BoardInfos[dev->minor].i_ScanType == 1) {
			/* i_Initialised=0; */
			/* i_InterruptFlag=0; */
			s_BoardInfos[dev->minor].i_Initialised = 0;
			s_BoardInfos[dev->minor].i_InterruptFlag = 0;
			/* END JK 06.07.04: Management of sevrals boards */
		}
		break;
	default:
		printk("\nThe parameters passed are in error\n");
		i_APCI3200_Reset(dev);
		return -EINVAL;
	}			/* switch(insn->unused[0]) */

	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_Read1AnalogInputChannel                 |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read  value  of the selected channel			         |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int ui_NoOfChannel    : Channel No to read            |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : Digital Value read                   |
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_EOC = 0;
	unsigned int ui_ChannelNo = 0;
	unsigned int ui_CommandRegister = 0;

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* ui_ChannelNo=i_ChannelNo; */
	ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo;

	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
  /*********************************/
	/* Write the channel to configure */
  /*********************************/
	/* Begin JK 20.10.2004: Bad channel value is used when using differential mode */
	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
	outl(0 | s_BoardInfos[dev->minor].i_ChannelNo,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
	/* End JK 20.10.2004: Bad channel value is used when using differential mode */

  /*******************************/
	/* Set the convert timing unit */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);

  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);

  /**************************************************************************/
	/* Set the start end stop index to the selected channel and set the start */
  /**************************************************************************/

	ui_CommandRegister = ui_ChannelNo | (ui_ChannelNo << 8) | 0x80000;

  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/

	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
      /************************/
		/* Enable the interrupt */
      /************************/
		ui_CommandRegister = ui_CommandRegister | 0x00100000;
	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */

  /******************************/
	/* Write the command register */
  /******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);

  /*****************************/
	/*Test if interrupt is enable */
  /*****************************/
	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
		do {
	  /*************************/
			/*Read the EOC Status bit */
	  /*************************/

			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;

		} while (ui_EOC != 1);

      /***************************************/
		/* Read the digital value of the input */
      /***************************************/

		/* data[0] = inl (devpriv->iobase+i_Offset + 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);
		/* END JK 06.07.04: Management of sevrals boards */

	}			/*  if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadCalibrationOffsetValue              |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read calibration offset  value  of the selected channel|
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : Calibration offset Value   |
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data)
{
	unsigned int ui_Temp = 0, ui_EOC = 0;
	unsigned int ui_CommandRegister = 0;

	/* BEGIN JK 06.07.04: Management of sevrals boards */
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
  /*********************************/
	/* Write the channel to configure */
  /*********************************/
	/* Begin JK 20.10.2004: This seems not necessary ! */
	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
	/* End JK 20.10.2004: This seems not necessary ! */

  /*******************************/
	/* Set the convert timing unit */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
  /*****************************/
	/*Read the calibration offset */
  /*****************************/
	/* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */
	ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);

  /*********************************/
	/*Configure the Offset Conversion */
  /*********************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */
	outl((ui_Temp | 0x00020000),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
  /*******************************/
	/*Initialise ui_CommandRegister */
  /*******************************/

	ui_CommandRegister = 0;

  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/

	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {

      /**********************/
		/*Enable the interrupt */
      /**********************/

		ui_CommandRegister = ui_CommandRegister | 0x00100000;

	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */

  /**********************/
	/*Start the conversion */
  /**********************/
	ui_CommandRegister = ui_CommandRegister | 0x00080000;

  /***************************/
	/*Write the command regiter */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);

  /*****************************/
	/*Test if interrupt is enable */
  /*****************************/

	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {

		do {
	  /*******************/
			/*Read the EOC flag */
	  /*******************/

			/* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;

		} while (ui_EOC != 1);

      /**************************************************/
		/*Read the digital value of the calibration Offset */
      /**************************************************/

		/* data[0] = inl(devpriv->iobase+i_Offset+ 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);
	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadCalibrationGainValue                |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read calibration gain  value  of the selected channel  |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : Calibration gain Value Of Input     |
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data)
{
	unsigned int ui_EOC = 0;
	int ui_CommandRegister = 0;

	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
  /*********************************/
	/* Write the channel to configure */
  /*********************************/
	/* Begin JK 20.10.2004: This seems not necessary ! */
	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
	/* End JK 20.10.2004: This seems not necessary ! */

  /***************************/
	/*Read the calibration gain */
  /***************************/
  /*******************************/
	/* Set the convert timing unit */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
  /*******************************/
	/*Configure the Gain Conversion */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */
	outl(0x00040000,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);

  /*******************************/
	/*Initialise ui_CommandRegister */
  /*******************************/

	ui_CommandRegister = 0;

  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/

	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {

      /**********************/
		/*Enable the interrupt */
      /**********************/

		ui_CommandRegister = ui_CommandRegister | 0x00100000;

	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */

  /**********************/
	/*Start the conversion */
  /**********************/

	ui_CommandRegister = ui_CommandRegister | 0x00080000;
  /***************************/
	/*Write the command regiter */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);

  /*****************************/
	/*Test if interrupt is enable */
  /*****************************/

	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {

		do {

	  /*******************/
			/*Read the EOC flag */
	  /*******************/

			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;

		} while (ui_EOC != 1);

      /************************************************/
		/*Read the digital value of the calibration Gain */
      /************************************************/

		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);

	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadCJCValue                            |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read CJC  value  of the selected channel               |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : CJC Value                           |
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data)
{
	unsigned int ui_EOC = 0;
	int ui_CommandRegister = 0;

  /******************************/
	/*Set the converting time unit */
  /******************************/

	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);

  /******************************/
	/*Configure the CJC Conversion */
  /******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */
	outl(0x00000400,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
  /*******************************/
	/*Initialise dw_CommandRegister */
  /*******************************/
	ui_CommandRegister = 0;
  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/
	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
      /**********************/
		/*Enable the interrupt */
      /**********************/
		ui_CommandRegister = ui_CommandRegister | 0x00100000;
	}

  /**********************/
	/*Start the conversion */
  /**********************/

	ui_CommandRegister = ui_CommandRegister | 0x00080000;

  /***************************/
	/*Write the command regiter */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);

  /*****************************/
	/*Test if interrupt is enable */
  /*****************************/

	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
		do {

	  /*******************/
			/*Read the EOC flag */
	  /*******************/

			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;

		} while (ui_EOC != 1);

      /***********************************/
		/*Read the digital value of the CJC */
      /***********************************/

		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);

	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadCJCCalOffset                        |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read CJC calibration offset  value  of the selected channel
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : CJC calibration offset Value
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data)
{
	unsigned int ui_EOC = 0;
	int ui_CommandRegister = 0;
  /*******************************************/
	/*Read calibration offset value for the CJC */
  /*******************************************/
  /*******************************/
	/* Set the convert timing unit */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
  /******************************/
	/*Configure the CJC Conversion */
  /******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */
	outl(0x00000400,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
  /*********************************/
	/*Configure the Offset Conversion */
  /*********************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(0x00020000, devpriv->iobase+i_Offset + 12); */
	outl(0x00020000,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
  /*******************************/
	/*Initialise ui_CommandRegister */
  /*******************************/
	ui_CommandRegister = 0;
  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/

	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
      /**********************/
		/*Enable the interrupt */
      /**********************/
		ui_CommandRegister = ui_CommandRegister | 0x00100000;

	}

  /**********************/
	/*Start the conversion */
  /**********************/
	ui_CommandRegister = ui_CommandRegister | 0x00080000;
  /***************************/
	/*Write the command regiter */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
		do {
	  /*******************/
			/*Read the EOC flag */
	  /*******************/
			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
		} while (ui_EOC != 1);

      /**************************************************/
		/*Read the digital value of the calibration Offset */
      /**************************************************/
		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);
	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_ReadCJCGainValue                        |
  |			          (struct comedi_device *dev,struct comedi_subdevice *s,       |
  |                     struct comedi_insn *insn,unsigned int *data)                      |
  +----------------------------------------------------------------------------+
  | Task              : Read CJC calibration gain value
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
  |                     unsigned int *data              : Data Pointer to read status  |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			          data[0]  : CJC calibration gain value
  |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data)
{
	unsigned int ui_EOC = 0;
	int ui_CommandRegister = 0;
  /*******************************/
	/* Set the convert timing unit */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /**************************/
	/* Set the convert timing */
  /**************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
  /******************************/
	/*Configure the CJC Conversion */
  /******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(0x00000400,devpriv->iobase+i_Offset + 4); */
	outl(0x00000400,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
  /*******************************/
	/*Configure the Gain Conversion */
  /*******************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(0x00040000,devpriv->iobase+i_Offset + 12); */
	outl(0x00040000,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);

  /*******************************/
	/*Initialise dw_CommandRegister */
  /*******************************/
	ui_CommandRegister = 0;
  /*********************************/
	/*Test if the interrupt is enable */
  /*********************************/
	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
      /**********************/
		/*Enable the interrupt */
      /**********************/
		ui_CommandRegister = ui_CommandRegister | 0x00100000;
	}
  /**********************/
	/*Start the conversion */
  /**********************/
	ui_CommandRegister = ui_CommandRegister | 0x00080000;
  /***************************/
	/*Write the command regiter */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */
	outl(ui_CommandRegister,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
		do {
	  /*******************/
			/*Read the EOC flag */
	  /*******************/
			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
			ui_EOC = inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
		} while (ui_EOC != 1);
      /************************************************/
		/*Read the digital value of the calibration Gain */
      /************************************************/
		/* data[0] = inl (devpriv->iobase+i_Offset + 28); */
		data[0] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);
	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_InsnBits_AnalogInput_Test               |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              : Tests the Selected Anlog Input Channel                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     struct comedi_subdevice *s     : Subdevice Pointer            |
  |                     struct comedi_insn *insn       : Insn Structure Pointer       |
  |                     unsigned int *data          : Data Pointer contains        |
  |                                          configuration parameters as below |
  |
  |
  |                           data[0]            : 0 TestAnalogInputShortCircuit
  |									     1 TestAnalogInputConnection							 														                        |

  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  |			        data[0]            : Digital value obtained      |
  |                           data[1]            : calibration offset          |
  |                           data[2]            : calibration gain            |
  |			                                                         |
  |			                                                         |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
{
	unsigned int ui_Configuration = 0;
	int i_Temp;		/* ,i_TimeUnit; */
	/* if(i_Initialised==0) */

	if (s_BoardInfos[dev->minor].i_Initialised == 0) {
		i_APCI3200_Reset(dev);
		return -EINVAL;
	}			/* if(i_Initialised==0); */
	if (data[0] != 0 && data[0] != 1) {
		printk("\nError in selection of functionality\n");
		i_APCI3200_Reset(dev);
		return -EINVAL;
	}			/* if(data[0]!=0 && data[0]!=1) */

	if (data[0] == 1)	/* Perform Short Circuit TEST */
	{
      /**************************/
		/*Set the short-cicuit bit */
      /**************************/
		/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
		while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
						i_Offset + 12) >> 19) & 1) !=
			1) ;
		/* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
		outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo),
			devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
			4);
      /*************************/
		/*Set the time unit to ns */
      /*************************/
		/* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
		   i_ADDIDATAConversionTimeUnit= 1; */
		/* i_Temp= i_InterruptFlag ; */
		i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
		/* i_InterruptFlag = ADDIDATA_DISABLE; */
		s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
		i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
		/* if(i_AutoCalibration == FALSE) */
		if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
			/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
			while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
							i_Offset +
							12) >> 19) & 1) != 1) ;

			/* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
			outl((0x00001000 | s_BoardInfos[dev->minor].
					i_ChannelNo),
				devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 4);
			data++;
			i_APCI3200_ReadCalibrationOffsetValue(dev, data);
			data++;
			i_APCI3200_ReadCalibrationGainValue(dev, data);
		}
	} else {
		/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
		while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
						i_Offset + 12) >> 19) & 1) !=
			1) ;
		/* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
		outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo),
			devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
			4);
		/* ui_Configuration = inl(devpriv->iobase+i_Offset + 0); */
		ui_Configuration =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 0);
      /*************************/
		/*Set the time unit to ns */
      /*************************/
		/* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
		   i_ADDIDATAConversionTimeUnit= 1; */
		/* i_Temp= i_InterruptFlag ; */
		i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
		/* i_InterruptFlag = ADDIDATA_DISABLE; */
		s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
		i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
		/* if(i_AutoCalibration == FALSE) */
		if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
			/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
			while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
							i_Offset +
							12) >> 19) & 1) != 1) ;
			/* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
			outl((0x00000800 | s_BoardInfos[dev->minor].
					i_ChannelNo),
				devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 4);
			data++;
			i_APCI3200_ReadCalibrationOffsetValue(dev, data);
			data++;
			i_APCI3200_ReadCalibrationGainValue(dev, data);
		}
	}
	/* i_InterruptFlag=i_Temp ; */
	s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp;
	/* printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); */
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : int i_APCI3200_InsnWriteReleaseAnalogInput             |
  |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
  |                      struct comedi_insn *insn,unsigned int *data)                     |
  +----------------------------------------------------------------------------+
  | Task              :  Resets the channels                                                      |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev      : Driver handle                |
  |                     struct comedi_subdevice *s     : Subdevice Pointer            |
  |                     struct comedi_insn *insn       : Insn Structure Pointer       |
  |                     unsigned int *data          : Data Pointer
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |

  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error          |
  |			                                                         |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
{
	i_APCI3200_Reset(dev);
	return insn->n;
}

/*
  +----------------------------------------------------------------------------+
  | Function name     :int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev|
  |			,struct comedi_subdevice *s,struct comedi_cmd *cmd)			         |
  |                                        									 |
  +----------------------------------------------------------------------------+
  | Task              : Test validity for a command for cyclic anlog input     |
  |                       acquisition  						     			 |
  |                     										                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev									 |
  |                     struct comedi_subdevice *s									 |
  |                     struct comedi_cmd *cmd              					         |
  |                     										                 |
  |
  |                     										                 |
  |                     										                 |
  |                     										                 |
  +----------------------------------------------------------------------------+
  | Return Value      :0              					                     |
  |                    													     |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
	struct comedi_cmd *cmd)
{

	int err = 0;
	int tmp;		/*  divisor1,divisor2; */
	unsigned int ui_ConvertTime = 0;
	unsigned int ui_ConvertTimeBase = 0;
	unsigned int ui_DelayTime = 0;
	unsigned int ui_DelayTimeBase = 0;
	int i_Triggermode = 0;
	int i_TriggerEdge = 0;
	int i_NbrOfChannel = 0;
	int i_Cpt = 0;
	double d_ConversionTimeForAllChannels = 0.0;
	double d_SCANTimeNewUnit = 0.0;
	/*  step 1: make sure trigger sources are trivially valid */

	tmp = cmd->start_src;
	cmd->start_src &= TRIG_NOW | TRIG_EXT;
	if (!cmd->start_src || tmp != cmd->start_src)
		err++;
	tmp = cmd->scan_begin_src;
	cmd->scan_begin_src &= TRIG_TIMER | TRIG_FOLLOW;
	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
		err++;
	tmp = cmd->convert_src;
	cmd->convert_src &= TRIG_TIMER;
	if (!cmd->convert_src || tmp != cmd->convert_src)
		err++;
	tmp = cmd->scan_end_src;
	cmd->scan_end_src &= TRIG_COUNT;
	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
		err++;
	tmp = cmd->stop_src;
	cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
	if (!cmd->stop_src || tmp != cmd->stop_src)
		err++;
	/* if(i_InterruptFlag==0) */
	if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) {
		err++;
		/*           printk("\nThe interrupt should be enabled\n"); */
	}
	if (err) {
		i_APCI3200_Reset(dev);
		return 1;
	}

	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
		err++;
	}
	if (cmd->start_src == TRIG_EXT) {
		i_TriggerEdge = cmd->start_arg & 0xFFFF;
		i_Triggermode = cmd->start_arg >> 16;
		if (i_TriggerEdge < 1 || i_TriggerEdge > 3) {
			err++;
			printk("\nThe trigger edge selection is in error\n");
		}
		if (i_Triggermode != 2) {
			err++;
			printk("\nThe trigger mode selection is in error\n");
		}
	}

	if (cmd->scan_begin_src != TRIG_TIMER &&
		cmd->scan_begin_src != TRIG_FOLLOW)
		err++;

	if (cmd->convert_src != TRIG_TIMER)
		err++;

	if (cmd->scan_end_src != TRIG_COUNT) {
		cmd->scan_end_src = TRIG_COUNT;
		err++;
	}

	if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
		err++;

	if (err) {
		i_APCI3200_Reset(dev);
		return 2;
	}
	/* i_FirstChannel=cmd->chanlist[0]; */
	s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
	/* i_LastChannel=cmd->chanlist[1]; */
	s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];

	if (cmd->convert_src == TRIG_TIMER) {
		ui_ConvertTime = cmd->convert_arg & 0xFFFF;
		ui_ConvertTimeBase = cmd->convert_arg >> 16;
		if (ui_ConvertTime != 20 && ui_ConvertTime != 40
			&& ui_ConvertTime != 80 && ui_ConvertTime != 160)
		{
			printk("\nThe selection of conversion time reload value is in error\n");
			err++;
		}		/*  if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) */
		if (ui_ConvertTimeBase != 2) {
			printk("\nThe selection of conversion time unit  is in error\n");
			err++;
		}		/* if(ui_ConvertTimeBase!=2) */
	} else {
		ui_ConvertTime = 0;
		ui_ConvertTimeBase = 0;
	}
	if (cmd->scan_begin_src == TRIG_FOLLOW) {
		ui_DelayTime = 0;
		ui_DelayTimeBase = 0;
	}			/* if(cmd->scan_begin_src==TRIG_FOLLOW) */
	else {
		ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
		ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
		if (ui_DelayTimeBase != 2 && ui_DelayTimeBase != 3) {
			err++;
			printk("\nThe Delay time base selection is in error\n");
		}
		if (ui_DelayTime < 1 || ui_DelayTime > 1023) {
			err++;
			printk("\nThe Delay time value is in error\n");
		}
		if (err) {
			i_APCI3200_Reset(dev);
			return 3;
		}
		fpu_begin();
		d_SCANTimeNewUnit = (double)ui_DelayTime;
		/* i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; */
		i_NbrOfChannel =
			s_BoardInfos[dev->minor].i_LastChannel -
			s_BoardInfos[dev->minor].i_FirstChannel + 4;
      /**********************************************************/
		/*calculate the total conversion time for all the channels */
      /**********************************************************/
		d_ConversionTimeForAllChannels =
			(double)((double)ui_ConvertTime /
			(double)i_NbrOfChannel);

      /*******************************/
		/*Convert the frequence in time */
      /*******************************/
		d_ConversionTimeForAllChannels =
			(double)1.0 / d_ConversionTimeForAllChannels;
		ui_ConvertTimeBase = 3;
      /***********************************/
		/*Test if the time unit is the same */
      /***********************************/

		if (ui_DelayTimeBase <= ui_ConvertTimeBase) {

			for (i_Cpt = 0;
				i_Cpt < (ui_ConvertTimeBase - ui_DelayTimeBase);
				i_Cpt++) {

				d_ConversionTimeForAllChannels =
					d_ConversionTimeForAllChannels * 1000;
				d_ConversionTimeForAllChannels =
					d_ConversionTimeForAllChannels + 1;
			}
		} else {
			for (i_Cpt = 0;
				i_Cpt < (ui_DelayTimeBase - ui_ConvertTimeBase);
				i_Cpt++) {
				d_SCANTimeNewUnit = d_SCANTimeNewUnit * 1000;

			}
		}

		if (d_ConversionTimeForAllChannels >= d_SCANTimeNewUnit) {

			printk("\nSCAN Delay value cannot be used\n");
	  /*********************************/
			/*SCAN Delay value cannot be used */
	  /*********************************/
			err++;
		}
		fpu_end();
	}			/* else if(cmd->scan_begin_src==TRIG_FOLLOW) */

	if (err) {
		i_APCI3200_Reset(dev);
		return 4;
	}

	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function name     :int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev,|
  | 											     struct comedi_subdevice *s)|
  |                                        									 |
  +----------------------------------------------------------------------------+
  | Task              : Stop the  acquisition  						     |
  |                     										                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev									 |
  |                     struct comedi_subdevice *s									 |
  |                                                 					         |
  +----------------------------------------------------------------------------+
  | Return Value      :0              					                     |
  |                    													     |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s)
{
	unsigned int ui_Configuration = 0;
	/* i_InterruptFlag=0; */
	/* i_Initialised=0; */
	/* i_Count=0; */
	/* i_Sum=0; */
	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
	s_BoardInfos[dev->minor].i_Initialised = 0;
	s_BoardInfos[dev->minor].i_Count = 0;
	s_BoardInfos[dev->minor].i_Sum = 0;

  /*******************/
	/*Read the register */
  /*******************/
	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
	ui_Configuration =
		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
  /*****************************/
	/*Reset the START and IRQ bit */
  /*****************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); */
	outl((ui_Configuration & 0xFFE7FFFF),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function name     : int i_APCI3200_CommandAnalogInput(struct comedi_device *dev,  |
  |												struct comedi_subdevice *s) |
  |                                        									 |
  +----------------------------------------------------------------------------+
  | Task              : Does asynchronous acquisition                          |
  |                     Determines the mode 1 or 2.						     |
  |                     										                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev									 |
  |                     struct comedi_subdevice *s									 |
  |                     														 |
  |                     														 |
  +----------------------------------------------------------------------------+
  | Return Value      :              					                         |
  |                    													     |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s)
{
	struct comedi_cmd *cmd = &s->async->cmd;
	unsigned int ui_Configuration = 0;
	/* INT  i_CurrentSource = 0; */
	unsigned int ui_Trigger = 0;
	unsigned int ui_TriggerEdge = 0;
	unsigned int ui_Triggermode = 0;
	unsigned int ui_ScanMode = 0;
	unsigned int ui_ConvertTime = 0;
	unsigned int ui_ConvertTimeBase = 0;
	unsigned int ui_DelayTime = 0;
	unsigned int ui_DelayTimeBase = 0;
	unsigned int ui_DelayMode = 0;
	/* i_FirstChannel=cmd->chanlist[0]; */
	/* i_LastChannel=cmd->chanlist[1]; */
	s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
	s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];
	if (cmd->start_src == TRIG_EXT) {
		ui_Trigger = 1;
		ui_TriggerEdge = cmd->start_arg & 0xFFFF;
		ui_Triggermode = cmd->start_arg >> 16;
	}			/* if(cmd->start_src==TRIG_EXT) */
	else {
		ui_Trigger = 0;
	}			/* elseif(cmd->start_src==TRIG_EXT) */

	if (cmd->stop_src == TRIG_COUNT) {
		ui_ScanMode = 0;
	}			/*  if (cmd->stop_src==TRIG_COUNT) */
	else {
		ui_ScanMode = 2;
	}			/* else if (cmd->stop_src==TRIG_COUNT) */

	if (cmd->scan_begin_src == TRIG_FOLLOW) {
		ui_DelayTime = 0;
		ui_DelayTimeBase = 0;
		ui_DelayMode = 0;
	}			/* if(cmd->scan_begin_src==TRIG_FOLLOW) */
	else {
		ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
		ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
		ui_DelayMode = 1;
	}			/* else if(cmd->scan_begin_src==TRIG_FOLLOW) */
	/*         printk("\nui_DelayTime=%u\n",ui_DelayTime); */
	/*         printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); */
	if (cmd->convert_src == TRIG_TIMER) {
		ui_ConvertTime = cmd->convert_arg & 0xFFFF;
		ui_ConvertTimeBase = cmd->convert_arg >> 16;
	} else {
		ui_ConvertTime = 0;
		ui_ConvertTimeBase = 0;
	}

	/*  if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) */
	/*    { */
  /**************************************************/
	/*Read the old configuration of the current source */
  /**************************************************/
	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 12); */
	ui_Configuration =
		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
  /***********************************************/
	/*Write the configuration of the current source */
  /***********************************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); */
	outl((ui_Configuration & 0xFFC00000),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
	/*  } */
	ui_Configuration = 0;
	/*      printk("\nfirstchannel=%u\n",i_FirstChannel); */
	/*      printk("\nlastchannel=%u\n",i_LastChannel); */
	/*      printk("\nui_Trigger=%u\n",ui_Trigger); */
	/*      printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); */
	/*      printk("\nui_Triggermode=%u\n",ui_Triggermode); */
	/*       printk("\nui_DelayMode=%u\n",ui_DelayMode); */
	/*      printk("\nui_ScanMode=%u\n",ui_ScanMode); */

	/* ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | */
	ui_Configuration =
		s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev->
			minor].
		i_LastChannel << 8) | 0x00100000 | (ui_Trigger << 24) |
		(ui_TriggerEdge << 25) | (ui_Triggermode << 27) | (ui_DelayMode
		<< 18) | (ui_ScanMode << 16);

  /*************************/
	/*Write the Configuration */
  /*************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); */
	outl(ui_Configuration,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8);
  /***********************/
	/*Write the Delay Value */
  /***********************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); */
	outl(ui_DelayTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40);
  /***************************/
	/*Write the Delay time base */
  /***************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); */
	outl(ui_DelayTimeBase,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44);
  /*********************************/
	/*Write the conversion time value */
  /*********************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); */
	outl(ui_ConvertTime,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);

  /********************************/
	/*Write the conversion time base */
  /********************************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); */
	outl(ui_ConvertTimeBase,
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
  /*******************/
	/*Read the register */
  /*******************/
	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 4); */
	ui_Configuration =
		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
  /******************/
	/*Set the SCAN bit */
  /******************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;

	/* outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); */
	outl(((ui_Configuration & 0x1E0FF) | 0x00002000),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
  /*******************/
	/*Read the register */
  /*******************/
	ui_Configuration = 0;
	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
	ui_Configuration =
		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);

  /*******************/
	/*Set the START bit */
  /*******************/
	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
					12) >> 19) & 1) != 1) ;
	/* outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); */
	outl((ui_Configuration | 0x00080000),
		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   :  int i_APCI3200_Reset(struct comedi_device *dev)			     |
  |							                                         |
  +----------------------------------------------------------------------------+
  | Task              :Resets the registers of the card                        |
  +----------------------------------------------------------------------------+
  | Input Parameters  :                                                        |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      :                                                        |
  |					                                                 |
  +----------------------------------------------------------------------------+
*/

int i_APCI3200_Reset(struct comedi_device *dev)
{
	int i_Temp;
	unsigned int dw_Dummy;
	/* i_InterruptFlag=0; */
	/* i_Initialised==0; */
	/* i_Count=0; */
	/* i_Sum=0; */

	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
	s_BoardInfos[dev->minor].i_Initialised = 0;
	s_BoardInfos[dev->minor].i_Count = 0;
	s_BoardInfos[dev->minor].i_Sum = 0;
	s_BoardInfos[dev->minor].b_StructInitialized = 0;

	outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);

	/*  Enable the interrupt for the controler */
	dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
	outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
	outl(0, devpriv->i_IobaseAddon);	/* Resets the output */
  /***************/
	/*Empty the buffer */
  /**************/
	for (i_Temp = 0; i_Temp <= 95; i_Temp++) {
		/* ui_InterruptChannelValue[i_Temp]=0; */
		s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0;
	}			/* for(i_Temp=0;i_Temp<=95;i_Temp++) */
  /*****************************/
	/*Reset the START and IRQ bit */
  /*****************************/
	for (i_Temp = 0; i_Temp <= 192;) {
		while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ;
		outl(0, devpriv->iobase + i_Temp + 8);
		i_Temp = i_Temp + 64;
	}			/* for(i_Temp=0;i_Temp<=192;i_Temp+64) */
	return 0;
}

/*
  +----------------------------------------------------------------------------+
  | Function   Name   : static void v_APCI3200_Interrupt					     |
  |					  (int irq , void *d)				 |
  +----------------------------------------------------------------------------+
  | Task              : Interrupt processing Routine                           |
  +----------------------------------------------------------------------------+
  | Input Parameters  : int irq                 : irq number                   |
  |                     void *d                 : void pointer                 |
  +----------------------------------------------------------------------------+
  | Output Parameters :	--													 |
  +----------------------------------------------------------------------------+
  | Return Value      : TRUE  : No error occur                                 |
  |		            : FALSE : Error occur. Return the error					 |
  |					                                                         |
  +----------------------------------------------------------------------------+
*/
void v_APCI3200_Interrupt(int irq, void *d)
{
	struct comedi_device *dev = d;
	unsigned int ui_StatusRegister = 0;
	unsigned int ui_ChannelNumber = 0;
	int i_CalibrationFlag = 0;
	int i_CJCFlag = 0;
	unsigned int ui_DummyValue = 0;
	unsigned int ui_DigitalTemperature = 0;
	unsigned int ui_DigitalInput = 0;
	int i_ConvertCJCCalibration;

	/* BEGIN JK TEST */
	int i_ReturnValue = 0;
	/* END JK TEST */

	/* printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); */

	/* switch(i_ScanType) */
	switch (s_BoardInfos[dev->minor].i_ScanType) {
	case 0:
	case 1:
		/* switch(i_ADDIDATAType) */
		switch (s_BoardInfos[dev->minor].i_ADDIDATAType) {
		case 0:
		case 1:

	  /************************************/
			/*Read the interrupt status register */
	  /************************************/
			/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
			ui_StatusRegister =
				inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 16);
			if ((ui_StatusRegister & 0x2) == 0x2) {
				/* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
				i_CalibrationFlag =
					((inl(devpriv->iobase +
							s_BoardInfos[dev->
								minor].
							i_Offset +
							12) & 0x00060000) >>
					17);
	      /*************************/
				/*Read the channel number */
	      /*************************/
				/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */

	      /*************************************/
				/*Read the digital analog input value */
	      /*************************************/
				/* ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); */
				ui_DigitalInput =
					inl(devpriv->iobase +
					s_BoardInfos[dev->minor].i_Offset + 28);

	      /***********************************************/
				/* Test if the value read is the channel value */
	      /***********************************************/
				if (i_CalibrationFlag == 0) {
					/* ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 0] = ui_DigitalInput;

					/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
					/*
					   printk("\n 1 - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos %i", ui_ChannelNumber);
					   i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num,
					   &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 6],
					   &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7],
					   &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]);
					 */
					/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

		  /******************************************************/
					/*Start the conversion of the calibration offset value */
		  /******************************************************/
					i_APCI3200_ReadCalibrationOffsetValue
						(dev, &ui_DummyValue);
				}	/* if (i_CalibrationFlag == 0) */
	      /**********************************************************/
				/* Test if the value read is the calibration offset value */
	      /**********************************************************/

				if (i_CalibrationFlag == 1) {

		  /******************/
					/* Save the value */
		  /******************/

					/* ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 1] = ui_DigitalInput;

		  /******************************************************/
					/* Start the conversion of the calibration gain value */
		  /******************************************************/
					i_APCI3200_ReadCalibrationGainValue(dev,
						&ui_DummyValue);
				}	/* if (i_CalibrationFlag == 1) */
	      /******************************************************/
				/*Test if the value read is the calibration gain value */
	      /******************************************************/

				if (i_CalibrationFlag == 2) {

		  /****************/
					/*Save the value */
		  /****************/
					/* ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 2] = ui_DigitalInput;
					/* if(i_ScanType==1) */
					if (s_BoardInfos[dev->minor].
						i_ScanType == 1) {

						/* i_InterruptFlag=0; */
						s_BoardInfos[dev->minor].
							i_InterruptFlag = 0;
						/* i_Count=i_Count + 6; */
						/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
						/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
						s_BoardInfos[dev->minor].
							i_Count =
							s_BoardInfos[dev->
							minor].i_Count + 9;
						/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
					}	/* if(i_ScanType==1) */
					else {
						/* i_Count=0; */
						s_BoardInfos[dev->minor].
							i_Count = 0;
					}	/* elseif(i_ScanType==1) */
					/* if(i_ScanType!=1) */
					if (s_BoardInfos[dev->minor].
						i_ScanType != 1) {
						i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
					}	/* if(i_ScanType!=1) */
					else {
						/* if(i_ChannelCount==i_Sum) */
						if (s_BoardInfos[dev->minor].
							i_ChannelCount ==
							s_BoardInfos[dev->
								minor].i_Sum) {
							send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
						}
					}	/* if(i_ScanType!=1) */
				}	/* if (i_CalibrationFlag == 2) */
			}	/*  if ((ui_StatusRegister & 0x2) == 0x2) */

			break;

		case 2:
	  /************************************/
			/*Read the interrupt status register */
	  /************************************/

			/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
			ui_StatusRegister =
				inl(devpriv->iobase +
				s_BoardInfos[dev->minor].i_Offset + 16);
	  /*************************/
			/*Test if interrupt occur */
	  /*************************/

			if ((ui_StatusRegister & 0x2) == 0x2) {

				/* i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); */
				i_CJCFlag =
					((inl(devpriv->iobase +
							s_BoardInfos[dev->
								minor].
							i_Offset +
							4) & 0x00000400) >> 10);

				/* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
				i_CalibrationFlag =
					((inl(devpriv->iobase +
							s_BoardInfos[dev->
								minor].
							i_Offset +
							12) & 0x00060000) >>
					17);

	      /*************************/
				/*Read the channel number */
	      /*************************/

				/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
				ui_ChannelNumber =
					inl(devpriv->iobase +
					s_BoardInfos[dev->minor].i_Offset + 24);
				/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
				s_BoardInfos[dev->minor].ui_Channel_num =
					ui_ChannelNumber;
				/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

	      /************************************/
				/*Read the digital temperature value */
	      /************************************/
				/* ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); */
				ui_DigitalTemperature =
					inl(devpriv->iobase +
					s_BoardInfos[dev->minor].i_Offset + 28);

	      /*********************************************/
				/*Test if the value read is the channel value */
	      /*********************************************/

				if ((i_CalibrationFlag == 0)
					&& (i_CJCFlag == 0)) {
					/* ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 0] =
						ui_DigitalTemperature;

		  /*********************************/
					/*Start the conversion of the CJC */
		  /*********************************/
					i_APCI3200_ReadCJCValue(dev,
						&ui_DummyValue);

				}	/* if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) */

		 /*****************************************/
				/*Test if the value read is the CJC value */
		 /*****************************************/

				if ((i_CJCFlag == 1)
					&& (i_CalibrationFlag == 0)) {
					/* ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 3] =
						ui_DigitalTemperature;

		  /******************************************************/
					/*Start the conversion of the calibration offset value */
		  /******************************************************/
					i_APCI3200_ReadCalibrationOffsetValue
						(dev, &ui_DummyValue);
				}	/*  if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) */

		 /********************************************************/
				/*Test if the value read is the calibration offset value */
		 /********************************************************/

				if ((i_CalibrationFlag == 1)
					&& (i_CJCFlag == 0)) {
					/* ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 1] =
						ui_DigitalTemperature;

		  /****************************************************/
					/*Start the conversion of the calibration gain value */
		  /****************************************************/
					i_APCI3200_ReadCalibrationGainValue(dev,
						&ui_DummyValue);

				}	/* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) */

	      /******************************************************/
				/*Test if the value read is the calibration gain value */
	      /******************************************************/

				if ((i_CalibrationFlag == 2)
					&& (i_CJCFlag == 0)) {
					/* ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 2] =
						ui_DigitalTemperature;

		  /**********************************************************/
					/*Test if the Calibration channel must be read for the CJC */
		  /**********************************************************/

					/*Test if the polarity is the same */
		  /**********************************/
					/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
					if (s_BoardInfos[dev->minor].
						i_CJCPolarity !=
						s_BoardInfos[dev->minor].
						i_ADDIDATAPolarity) {
						i_ConvertCJCCalibration = 1;
					}	/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
					else {
						/* if(i_CJCGain==i_ADDIDATAGain) */
						if (s_BoardInfos[dev->minor].
							i_CJCGain ==
							s_BoardInfos[dev->
								minor].
							i_ADDIDATAGain) {
							i_ConvertCJCCalibration
								= 0;
						}	/* if(i_CJCGain==i_ADDIDATAGain) */
						else {
							i_ConvertCJCCalibration
								= 1;
						}	/* elseif(i_CJCGain==i_ADDIDATAGain) */
					}	/* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
					if (i_ConvertCJCCalibration == 1) {
		      /****************************************************************/
						/*Start the conversion of the calibration gain value for the CJC */
		      /****************************************************************/
						i_APCI3200_ReadCJCCalOffset(dev,
							&ui_DummyValue);

					}	/* if(i_ConvertCJCCalibration==1) */
					else {
						/* ui_InterruptChannelValue[i_Count + 4]=0; */
						/* ui_InterruptChannelValue[i_Count + 5]=0; */
						s_BoardInfos[dev->minor].
							ui_InterruptChannelValue
							[s_BoardInfos[dev->
								minor].i_Count +
							4] = 0;
						s_BoardInfos[dev->minor].
							ui_InterruptChannelValue
							[s_BoardInfos[dev->
								minor].i_Count +
							5] = 0;
					}	/* elseif(i_ConvertCJCCalibration==1) */
				}	/* else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) */

		 /********************************************************************/
				/*Test if the value read is the calibration offset value for the CJC */
		 /********************************************************************/

				if ((i_CalibrationFlag == 1)
					&& (i_CJCFlag == 1)) {
					/* ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 4] =
						ui_DigitalTemperature;

		  /****************************************************************/
					/*Start the conversion of the calibration gain value for the CJC */
		  /****************************************************************/
					i_APCI3200_ReadCJCCalGain(dev,
						&ui_DummyValue);

				}	/* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) */

	      /******************************************************************/
				/*Test if the value read is the calibration gain value for the CJC */
	      /******************************************************************/

				if ((i_CalibrationFlag == 2)
					&& (i_CJCFlag == 1)) {
					/* ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; */
					s_BoardInfos[dev->minor].
						ui_InterruptChannelValue
						[s_BoardInfos[dev->minor].
						i_Count + 5] =
						ui_DigitalTemperature;

					/* if(i_ScanType==1) */
					if (s_BoardInfos[dev->minor].
						i_ScanType == 1) {

						/* i_InterruptFlag=0; */
						s_BoardInfos[dev->minor].
							i_InterruptFlag = 0;
						/* i_Count=i_Count + 6; */
						/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
						/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
						s_BoardInfos[dev->minor].
							i_Count =
							s_BoardInfos[dev->
							minor].i_Count + 9;
						/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
					}	/* if(i_ScanType==1) */
					else {
						/* i_Count=0; */
						s_BoardInfos[dev->minor].
							i_Count = 0;
					}	/* elseif(i_ScanType==1) */

					/* if(i_ScanType!=1) */
					if (s_BoardInfos[dev->minor].
						i_ScanType != 1) {
						send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
					}	/* if(i_ScanType!=1) */
					else {
						/* if(i_ChannelCount==i_Sum) */
						if (s_BoardInfos[dev->minor].
							i_ChannelCount ==
							s_BoardInfos[dev->
								minor].i_Sum) {
							send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */

						}	/* if(i_ChannelCount==i_Sum) */
					}	/* else if(i_ScanType!=1) */
				}	/* if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) */

			}	/* else if ((ui_StatusRegister & 0x2) == 0x2) */
			break;
		}		/* switch(i_ADDIDATAType) */
		break;
	case 2:
	case 3:
		i_APCI3200_InterruptHandleEos(dev);
		break;
	}			/* switch(i_ScanType) */
	return;
}

/*
  +----------------------------------------------------------------------------+
  | Function name     :int i_APCI3200_InterruptHandleEos(struct comedi_device *dev)   |
  |                                        									 |
  |                                            						         |
  +----------------------------------------------------------------------------+
  | Task              : .                   |
  |                     This function copies the acquired data(from FIFO)      |
  |				to Comedi buffer.		 							 |
  |                     										                 |
  +----------------------------------------------------------------------------+
  | Input Parameters  : struct comedi_device *dev									 |
  |                     														 |
  |                                                 					         |
  +----------------------------------------------------------------------------+
  | Return Value      : 0            					                         |
  |                    													     |
  +----------------------------------------------------------------------------+
*/
int i_APCI3200_InterruptHandleEos(struct comedi_device *dev)
{
	unsigned int ui_StatusRegister = 0;
	struct comedi_subdevice *s = dev->subdevices + 0;

	/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
	/* comedi_async *async = s->async; */
	/* UINT *data; */
	/* data=async->data+async->buf_int_ptr;//new samples added from here onwards */
	int n = 0, i = 0;
	/* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */

  /************************************/
	/*Read the interrupt status register */
  /************************************/
	/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
	ui_StatusRegister =
		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16);

  /*************************/
	/*Test if interrupt occur */
  /*************************/

	if ((ui_StatusRegister & 0x2) == 0x2) {
      /*************************/
		/*Read the channel number */
      /*************************/
		/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
		/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
		/* This value is not used */
		/* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */
		s->async->events = 0;
		/* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */

      /*************************************/
		/*Read the digital Analog Input value */
      /*************************************/

		/* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */
		/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
		/* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */
		s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev->
				minor].i_Count] =
			inl(devpriv->iobase +
			s_BoardInfos[dev->minor].i_Offset + 28);
		/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */

		/* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */
		if ((s_BoardInfos[dev->minor].i_Count ==
				(s_BoardInfos[dev->minor].i_LastChannel -
					s_BoardInfos[dev->minor].
					i_FirstChannel + 3))) {

			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
			s_BoardInfos[dev->minor].i_Count++;

			for (i = s_BoardInfos[dev->minor].i_FirstChannel;
				i <= s_BoardInfos[dev->minor].i_LastChannel;
				i++) {
				i_APCI3200_GetChannelCalibrationValue(dev, i,
					&s_BoardInfos[dev->minor].
					ui_ScanValueArray[s_BoardInfos[dev->
							minor].i_Count + ((i -
								s_BoardInfos
								[dev->minor].
								i_FirstChannel)
							* 3)],
					&s_BoardInfos[dev->minor].
					ui_ScanValueArray[s_BoardInfos[dev->
							minor].i_Count + ((i -
								s_BoardInfos
								[dev->minor].
								i_FirstChannel)
							* 3) + 1],
					&s_BoardInfos[dev->minor].
					ui_ScanValueArray[s_BoardInfos[dev->
							minor].i_Count + ((i -
								s_BoardInfos
								[dev->minor].
								i_FirstChannel)
							* 3) + 2]);
			}

			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */

			/* i_Count=-1; */

			s_BoardInfos[dev->minor].i_Count = -1;

			/* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
			/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
			/* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
			/* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
			/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
			/* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
			/* comedi_eos(dev,s); */

			/*  Set the event type (Comedi Buffer End Of Scan) */
			s->async->events |= COMEDI_CB_EOS;

			/*  Test if enougth memory is available and allocate it for 7 values */
			/* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */
			n = comedi_buf_write_alloc(s->async,
				(7 + 12) * sizeof(unsigned int));

			/*  If not enougth memory available, event is set to Comedi Buffer Errror */
			if (n > ((7 + 12) * sizeof(unsigned int))) {
				printk("\ncomedi_buf_write_alloc n = %i", n);
				s->async->events |= COMEDI_CB_ERROR;
			}
			/*  Write all 7 scan values in the comedi buffer */
			comedi_buf_memcpy_to(s->async, 0,
				(unsigned int *) s_BoardInfos[dev->minor].
				ui_ScanValueArray, (7 + 12) * sizeof(unsigned int));

			/*  Update comedi buffer pinters indexes */
			comedi_buf_write_free(s->async,
				(7 + 12) * sizeof(unsigned int));

			/*  Send events */
			comedi_event(dev, s);
			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */

			/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
			/*  */
			/* if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over */
			/*   { */
			/*     /* buffer rollover */ */
			/*     s->async->buf_int_ptr=0; */
			/*     comedi_eobuf(dev,s); */
			/*   } */
			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
		}
		/* i_Count++; */
		s_BoardInfos[dev->minor].i_Count++;
	}
	/* i_InterruptFlag=0; */
	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
	return 0;
}