| # ltmain.sh - Provide generalized library-building support services. |
| # NOTE: Changing this file will not affect anything until you rerun configure. |
| # |
| # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 |
| # Free Software Foundation, Inc. |
| # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, but |
| # WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| # |
| # As a special exception to the GNU General Public License, if you |
| # distribute this file as part of a program that contains a |
| # configuration script generated by Autoconf, you may include it under |
| # the same distribution terms that you use for the rest of that program. |
| |
| basename="s,^.*/,,g" |
| |
| # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh |
| # is ksh but when the shell is invoked as "sh" and the current value of |
| # the _XPG environment variable is not equal to 1 (one), the special |
| # positional parameter $0, within a function call, is the name of the |
| # function. |
| progpath="$0" |
| |
| # The name of this program: |
| progname=`echo "$progpath" | $SED $basename` |
| modename="$progname" |
| |
| # Global variables: |
| EXIT_SUCCESS=0 |
| EXIT_FAILURE=1 |
| |
| PROGRAM=ltmain.sh |
| PACKAGE=libtool |
| VERSION=1.5.22 |
| TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" |
| |
| # See if we are running on zsh, and set the options which allow our |
| # commands through without removal of \ escapes. |
| if test -n "${ZSH_VERSION+set}" ; then |
| setopt NO_GLOB_SUBST |
| fi |
| |
| # Check that we have a working $echo. |
| if test "X$1" = X--no-reexec; then |
| # Discard the --no-reexec flag, and continue. |
| shift |
| elif test "X$1" = X--fallback-echo; then |
| # Avoid inline document here, it may be left over |
| : |
| elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then |
| # Yippee, $echo works! |
| : |
| else |
| # Restart under the correct shell, and then maybe $echo will work. |
| exec $SHELL "$progpath" --no-reexec ${1+"$@"} |
| fi |
| |
| if test "X$1" = X--fallback-echo; then |
| # used as fallback echo |
| shift |
| cat <<EOF |
| $* |
| EOF |
| exit $EXIT_SUCCESS |
| fi |
| |
| default_mode= |
| help="Try \`$progname --help' for more information." |
| magic="%%%MAGIC variable%%%" |
| mkdir="mkdir" |
| mv="mv -f" |
| rm="rm -f" |
| |
| # Sed substitution that helps us do robust quoting. It backslashifies |
| # metacharacters that are still active within double-quoted strings. |
| Xsed="${SED}"' -e 1s/^X//' |
| sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' |
| # test EBCDIC or ASCII |
| case `echo X|tr X '\101'` in |
| A) # ASCII based system |
| # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr |
| SP2NL='tr \040 \012' |
| NL2SP='tr \015\012 \040\040' |
| ;; |
| *) # EBCDIC based system |
| SP2NL='tr \100 \n' |
| NL2SP='tr \r\n \100\100' |
| ;; |
| esac |
| |
| # NLS nuisances. |
| # Only set LANG and LC_ALL to C if already set. |
| # These must not be set unconditionally because not all systems understand |
| # e.g. LANG=C (notably SCO). |
| # We save the old values to restore during execute mode. |
| if test "${LC_ALL+set}" = set; then |
| save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL |
| fi |
| if test "${LANG+set}" = set; then |
| save_LANG="$LANG"; LANG=C; export LANG |
| fi |
| |
| # Make sure IFS has a sensible default |
| lt_nl=' |
| ' |
| IFS=" $lt_nl" |
| |
| if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then |
| $echo "$modename: not configured to build any kind of library" 1>&2 |
| $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Global variables. |
| mode=$default_mode |
| nonopt= |
| prev= |
| prevopt= |
| run= |
| show="$echo" |
| show_help= |
| execute_dlfiles= |
| duplicate_deps=no |
| preserve_args= |
| lo2o="s/\\.lo\$/.${objext}/" |
| o2lo="s/\\.${objext}\$/.lo/" |
| |
| ##################################### |
| # Shell function definitions: |
| # This seems to be the best place for them |
| |
| # func_mktempdir [string] |
| # Make a temporary directory that won't clash with other running |
| # libtool processes, and avoids race conditions if possible. If |
| # given, STRING is the basename for that directory. |
| func_mktempdir () |
| { |
| my_template="${TMPDIR-/tmp}/${1-$progname}" |
| |
| if test "$run" = ":"; then |
| # Return a directory name, but don't create it in dry-run mode |
| my_tmpdir="${my_template}-$$" |
| else |
| |
| # If mktemp works, use that first and foremost |
| my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` |
| |
| if test ! -d "$my_tmpdir"; then |
| # Failing that, at least try and use $RANDOM to avoid a race |
| my_tmpdir="${my_template}-${RANDOM-0}$$" |
| |
| save_mktempdir_umask=`umask` |
| umask 0077 |
| $mkdir "$my_tmpdir" |
| umask $save_mktempdir_umask |
| fi |
| |
| # If we're not in dry-run mode, bomb out on failure |
| test -d "$my_tmpdir" || { |
| $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 |
| exit $EXIT_FAILURE |
| } |
| fi |
| |
| $echo "X$my_tmpdir" | $Xsed |
| } |
| |
| |
| # func_win32_libid arg |
| # return the library type of file 'arg' |
| # |
| # Need a lot of goo to handle *both* DLLs and import libs |
| # Has to be a shell function in order to 'eat' the argument |
| # that is supplied when $file_magic_command is called. |
| func_win32_libid () |
| { |
| win32_libid_type="unknown" |
| win32_fileres=`file -L $1 2>/dev/null` |
| case $win32_fileres in |
| *ar\ archive\ import\ library*) # definitely import |
| win32_libid_type="x86 archive import" |
| ;; |
| *ar\ archive*) # could be an import, or static |
| if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ |
| $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then |
| win32_nmres=`eval $NM -f posix -A $1 | \ |
| $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` |
| case $win32_nmres in |
| import*) win32_libid_type="x86 archive import";; |
| *) win32_libid_type="x86 archive static";; |
| esac |
| fi |
| ;; |
| *DLL*) |
| win32_libid_type="x86 DLL" |
| ;; |
| *executable*) # but shell scripts are "executable" too... |
| case $win32_fileres in |
| *MS\ Windows\ PE\ Intel*) |
| win32_libid_type="x86 DLL" |
| ;; |
| esac |
| ;; |
| esac |
| $echo $win32_libid_type |
| } |
| |
| |
| # func_infer_tag arg |
| # Infer tagged configuration to use if any are available and |
| # if one wasn't chosen via the "--tag" command line option. |
| # Only attempt this if the compiler in the base compile |
| # command doesn't match the default compiler. |
| # arg is usually of the form 'gcc ...' |
| func_infer_tag () |
| { |
| if test -n "$available_tags" && test -z "$tagname"; then |
| CC_quoted= |
| for arg in $CC; do |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| CC_quoted="$CC_quoted $arg" |
| done |
| case $@ in |
| # Blanks in the command may have been stripped by the calling shell, |
| # but not from the CC environment variable when configure was run. |
| " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; |
| # Blanks at the start of $base_compile will cause this to fail |
| # if we don't check for them as well. |
| *) |
| for z in $available_tags; do |
| if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then |
| # Evaluate the configuration. |
| eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" |
| CC_quoted= |
| for arg in $CC; do |
| # Double-quote args containing other shell metacharacters. |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| CC_quoted="$CC_quoted $arg" |
| done |
| case "$@ " in |
| " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) |
| # The compiler in the base compile command matches |
| # the one in the tagged configuration. |
| # Assume this is the tagged configuration we want. |
| tagname=$z |
| break |
| ;; |
| esac |
| fi |
| done |
| # If $tagname still isn't set, then no tagged configuration |
| # was found and let the user know that the "--tag" command |
| # line option must be used. |
| if test -z "$tagname"; then |
| $echo "$modename: unable to infer tagged configuration" |
| $echo "$modename: specify a tag with \`--tag'" 1>&2 |
| exit $EXIT_FAILURE |
| # else |
| # $echo "$modename: using $tagname tagged configuration" |
| fi |
| ;; |
| esac |
| fi |
| } |
| |
| |
| # func_extract_an_archive dir oldlib |
| func_extract_an_archive () |
| { |
| f_ex_an_ar_dir="$1"; shift |
| f_ex_an_ar_oldlib="$1" |
| |
| $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" |
| $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? |
| if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then |
| : |
| else |
| $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| } |
| |
| # func_extract_archives gentop oldlib ... |
| func_extract_archives () |
| { |
| my_gentop="$1"; shift |
| my_oldlibs=${1+"$@"} |
| my_oldobjs="" |
| my_xlib="" |
| my_xabs="" |
| my_xdir="" |
| my_status="" |
| |
| $show "${rm}r $my_gentop" |
| $run ${rm}r "$my_gentop" |
| $show "$mkdir $my_gentop" |
| $run $mkdir "$my_gentop" |
| my_status=$? |
| if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then |
| exit $my_status |
| fi |
| |
| for my_xlib in $my_oldlibs; do |
| # Extract the objects. |
| case $my_xlib in |
| [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; |
| *) my_xabs=`pwd`"/$my_xlib" ;; |
| esac |
| my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` |
| my_xdir="$my_gentop/$my_xlib" |
| |
| $show "${rm}r $my_xdir" |
| $run ${rm}r "$my_xdir" |
| $show "$mkdir $my_xdir" |
| $run $mkdir "$my_xdir" |
| exit_status=$? |
| if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then |
| exit $exit_status |
| fi |
| case $host in |
| *-darwin*) |
| $show "Extracting $my_xabs" |
| # Do not bother doing anything if just a dry run |
| if test -z "$run"; then |
| darwin_orig_dir=`pwd` |
| cd $my_xdir || exit $? |
| darwin_archive=$my_xabs |
| darwin_curdir=`pwd` |
| darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` |
| darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` |
| if test -n "$darwin_arches"; then |
| darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` |
| darwin_arch= |
| $show "$darwin_base_archive has multiple architectures $darwin_arches" |
| for darwin_arch in $darwin_arches ; do |
| mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" |
| lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" |
| cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" |
| func_extract_an_archive "`pwd`" "${darwin_base_archive}" |
| cd "$darwin_curdir" |
| $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" |
| done # $darwin_arches |
| ## Okay now we have a bunch of thin objects, gotta fatten them up :) |
| darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` |
| darwin_file= |
| darwin_files= |
| for darwin_file in $darwin_filelist; do |
| darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` |
| lipo -create -output "$darwin_file" $darwin_files |
| done # $darwin_filelist |
| ${rm}r unfat-$$ |
| cd "$darwin_orig_dir" |
| else |
| cd "$darwin_orig_dir" |
| func_extract_an_archive "$my_xdir" "$my_xabs" |
| fi # $darwin_arches |
| fi # $run |
| ;; |
| *) |
| func_extract_an_archive "$my_xdir" "$my_xabs" |
| ;; |
| esac |
| my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` |
| done |
| func_extract_archives_result="$my_oldobjs" |
| } |
| # End of Shell function definitions |
| ##################################### |
| |
| # Darwin sucks |
| eval std_shrext=\"$shrext_cmds\" |
| |
| disable_libs=no |
| |
| # Parse our command line options once, thoroughly. |
| while test "$#" -gt 0 |
| do |
| arg="$1" |
| shift |
| |
| case $arg in |
| -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; |
| *) optarg= ;; |
| esac |
| |
| # If the previous option needs an argument, assign it. |
| if test -n "$prev"; then |
| case $prev in |
| execute_dlfiles) |
| execute_dlfiles="$execute_dlfiles $arg" |
| ;; |
| tag) |
| tagname="$arg" |
| preserve_args="${preserve_args}=$arg" |
| |
| # Check whether tagname contains only valid characters |
| case $tagname in |
| *[!-_A-Za-z0-9,/]*) |
| $echo "$progname: invalid tag name: $tagname" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| case $tagname in |
| CC) |
| # Don't test for the "default" C tag, as we know, it's there, but |
| # not specially marked. |
| ;; |
| *) |
| if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then |
| taglist="$taglist $tagname" |
| # Evaluate the configuration. |
| eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" |
| else |
| $echo "$progname: ignoring unknown tag $tagname" 1>&2 |
| fi |
| ;; |
| esac |
| ;; |
| *) |
| eval "$prev=\$arg" |
| ;; |
| esac |
| |
| prev= |
| prevopt= |
| continue |
| fi |
| |
| # Have we seen a non-optional argument yet? |
| case $arg in |
| --help) |
| show_help=yes |
| ;; |
| |
| --version) |
| $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" |
| $echo |
| $echo "Copyright (C) 2005 Free Software Foundation, Inc." |
| $echo "This is free software; see the source for copying conditions. There is NO" |
| $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." |
| exit $? |
| ;; |
| |
| --config) |
| ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath |
| # Now print the configurations for the tags. |
| for tagname in $taglist; do |
| ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" |
| done |
| exit $? |
| ;; |
| |
| --debug) |
| $echo "$progname: enabling shell trace mode" |
| set -x |
| preserve_args="$preserve_args $arg" |
| ;; |
| |
| --dry-run | -n) |
| run=: |
| ;; |
| |
| --features) |
| $echo "host: $host" |
| if test "$build_libtool_libs" = yes; then |
| $echo "enable shared libraries" |
| else |
| $echo "disable shared libraries" |
| fi |
| if test "$build_old_libs" = yes; then |
| $echo "enable static libraries" |
| else |
| $echo "disable static libraries" |
| fi |
| exit $? |
| ;; |
| |
| --finish) mode="finish" ;; |
| |
| --mode) prevopt="--mode" prev=mode ;; |
| --mode=*) mode="$optarg" ;; |
| |
| --preserve-dup-deps) duplicate_deps="yes" ;; |
| |
| --quiet | --silent) |
| show=: |
| preserve_args="$preserve_args $arg" |
| ;; |
| |
| --tag) |
| prevopt="--tag" |
| prev=tag |
| preserve_args="$preserve_args --tag" |
| ;; |
| --tag=*) |
| set tag "$optarg" ${1+"$@"} |
| shift |
| prev=tag |
| preserve_args="$preserve_args --tag" |
| ;; |
| |
| -dlopen) |
| prevopt="-dlopen" |
| prev=execute_dlfiles |
| ;; |
| |
| -*) |
| $echo "$modename: unrecognized option \`$arg'" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| |
| *) |
| nonopt="$arg" |
| break |
| ;; |
| esac |
| done |
| |
| if test -n "$prevopt"; then |
| $echo "$modename: option \`$prevopt' requires an argument" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| case $disable_libs in |
| no) |
| ;; |
| shared) |
| build_libtool_libs=no |
| build_old_libs=yes |
| ;; |
| static) |
| build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` |
| ;; |
| esac |
| |
| # If this variable is set in any of the actions, the command in it |
| # will be execed at the end. This prevents here-documents from being |
| # left over by shells. |
| exec_cmd= |
| |
| if test -z "$show_help"; then |
| |
| # Infer the operation mode. |
| if test -z "$mode"; then |
| $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 |
| $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 |
| case $nonopt in |
| *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) |
| mode=link |
| for arg |
| do |
| case $arg in |
| -c) |
| mode=compile |
| break |
| ;; |
| esac |
| done |
| ;; |
| *db | *dbx | *strace | *truss) |
| mode=execute |
| ;; |
| *install*|cp|mv) |
| mode=install |
| ;; |
| *rm) |
| mode=uninstall |
| ;; |
| *) |
| # If we have no mode, but dlfiles were specified, then do execute mode. |
| test -n "$execute_dlfiles" && mode=execute |
| |
| # Just use the default operation mode. |
| if test -z "$mode"; then |
| if test -n "$nonopt"; then |
| $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 |
| else |
| $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 |
| fi |
| fi |
| ;; |
| esac |
| fi |
| |
| # Only execute mode is allowed to have -dlopen flags. |
| if test -n "$execute_dlfiles" && test "$mode" != execute; then |
| $echo "$modename: unrecognized option \`-dlopen'" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Change the help message to a mode-specific one. |
| generic_help="$help" |
| help="Try \`$modename --help --mode=$mode' for more information." |
| |
| # These modes are in order of execution frequency so that they run quickly. |
| case $mode in |
| # libtool compile mode |
| compile) |
| modename="$modename: compile" |
| # Get the compilation command and the source file. |
| base_compile= |
| srcfile="$nonopt" # always keep a non-empty value in "srcfile" |
| suppress_opt=yes |
| suppress_output= |
| arg_mode=normal |
| libobj= |
| later= |
| |
| for arg |
| do |
| case $arg_mode in |
| arg ) |
| # do not "continue". Instead, add this to base_compile |
| lastarg="$arg" |
| arg_mode=normal |
| ;; |
| |
| target ) |
| libobj="$arg" |
| arg_mode=normal |
| continue |
| ;; |
| |
| normal ) |
| # Accept any command-line options. |
| case $arg in |
| -o) |
| if test -n "$libobj" ; then |
| $echo "$modename: you cannot specify \`-o' more than once" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| arg_mode=target |
| continue |
| ;; |
| |
| -static | -prefer-pic | -prefer-non-pic) |
| later="$later $arg" |
| continue |
| ;; |
| |
| -no-suppress) |
| suppress_opt=no |
| continue |
| ;; |
| |
| -Xcompiler) |
| arg_mode=arg # the next one goes into the "base_compile" arg list |
| continue # The current "srcfile" will either be retained or |
| ;; # replaced later. I would guess that would be a bug. |
| |
| -Wc,*) |
| args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` |
| lastarg= |
| save_ifs="$IFS"; IFS=',' |
| for arg in $args; do |
| IFS="$save_ifs" |
| |
| # Double-quote args containing other shell metacharacters. |
| # Many Bourne shells cannot handle close brackets correctly |
| # in scan sets, so we specify it separately. |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| lastarg="$lastarg $arg" |
| done |
| IFS="$save_ifs" |
| lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` |
| |
| # Add the arguments to base_compile. |
| base_compile="$base_compile $lastarg" |
| continue |
| ;; |
| |
| * ) |
| # Accept the current argument as the source file. |
| # The previous "srcfile" becomes the current argument. |
| # |
| lastarg="$srcfile" |
| srcfile="$arg" |
| ;; |
| esac # case $arg |
| ;; |
| esac # case $arg_mode |
| |
| # Aesthetically quote the previous argument. |
| lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` |
| |
| case $lastarg in |
| # Double-quote args containing other shell metacharacters. |
| # Many Bourne shells cannot handle close brackets correctly |
| # in scan sets, and some SunOS ksh mistreat backslash-escaping |
| # in scan sets (worked around with variable expansion), |
| # and furthermore cannot handle '|' '&' '(' ')' in scan sets |
| # at all, so we specify them separately. |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| lastarg="\"$lastarg\"" |
| ;; |
| esac |
| |
| base_compile="$base_compile $lastarg" |
| done # for arg |
| |
| case $arg_mode in |
| arg) |
| $echo "$modename: you must specify an argument for -Xcompile" |
| exit $EXIT_FAILURE |
| ;; |
| target) |
| $echo "$modename: you must specify a target with \`-o'" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| *) |
| # Get the name of the library object. |
| [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` |
| ;; |
| esac |
| |
| # Recognize several different file suffixes. |
| # If the user specifies -o file.o, it is replaced with file.lo |
| xform='[cCFSifmso]' |
| case $libobj in |
| *.ada) xform=ada ;; |
| *.adb) xform=adb ;; |
| *.ads) xform=ads ;; |
| *.asm) xform=asm ;; |
| *.c++) xform=c++ ;; |
| *.cc) xform=cc ;; |
| *.ii) xform=ii ;; |
| *.class) xform=class ;; |
| *.cpp) xform=cpp ;; |
| *.cxx) xform=cxx ;; |
| *.f90) xform=f90 ;; |
| *.for) xform=for ;; |
| *.java) xform=java ;; |
| esac |
| |
| libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` |
| |
| case $libobj in |
| *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; |
| *) |
| $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| func_infer_tag $base_compile |
| |
| for arg in $later; do |
| case $arg in |
| -static) |
| build_old_libs=yes |
| continue |
| ;; |
| |
| -prefer-pic) |
| pic_mode=yes |
| continue |
| ;; |
| |
| -prefer-non-pic) |
| pic_mode=no |
| continue |
| ;; |
| esac |
| done |
| |
| qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` |
| case $qlibobj in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| qlibobj="\"$qlibobj\"" ;; |
| esac |
| test "X$libobj" != "X$qlibobj" \ |
| && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ |
| && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." |
| objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` |
| xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$xdir" = "X$obj"; then |
| xdir= |
| else |
| xdir=$xdir/ |
| fi |
| lobj=${xdir}$objdir/$objname |
| |
| if test -z "$base_compile"; then |
| $echo "$modename: you must specify a compilation command" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Delete any leftover library objects. |
| if test "$build_old_libs" = yes; then |
| removelist="$obj $lobj $libobj ${libobj}T" |
| else |
| removelist="$lobj $libobj ${libobj}T" |
| fi |
| |
| $run $rm $removelist |
| trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 |
| |
| # On Cygwin there's no "real" PIC flag so we must build both object types |
| case $host_os in |
| cygwin* | mingw* | pw32* | os2*) |
| pic_mode=default |
| ;; |
| esac |
| if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then |
| # non-PIC code in shared libraries is not supported |
| pic_mode=default |
| fi |
| |
| # Calculate the filename of the output object if compiler does |
| # not support -o with -c |
| if test "$compiler_c_o" = no; then |
| output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} |
| lockfile="$output_obj.lock" |
| removelist="$removelist $output_obj $lockfile" |
| trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 |
| else |
| output_obj= |
| need_locks=no |
| lockfile= |
| fi |
| |
| # Lock this critical section if it is needed |
| # We use this script file to make the link, it avoids creating a new file |
| if test "$need_locks" = yes; then |
| until $run ln "$progpath" "$lockfile" 2>/dev/null; do |
| $show "Waiting for $lockfile to be removed" |
| sleep 2 |
| done |
| elif test "$need_locks" = warn; then |
| if test -f "$lockfile"; then |
| $echo "\ |
| *** ERROR, $lockfile exists and contains: |
| `cat $lockfile 2>/dev/null` |
| |
| This indicates that another process is trying to use the same |
| temporary object file, and libtool could not work around it because |
| your compiler does not support \`-c' and \`-o' together. If you |
| repeat this compilation, it may succeed, by chance, but you had better |
| avoid parallel builds (make -j) in this platform, or get a better |
| compiler." |
| |
| $run $rm $removelist |
| exit $EXIT_FAILURE |
| fi |
| $echo "$srcfile" > "$lockfile" |
| fi |
| |
| if test -n "$fix_srcfile_path"; then |
| eval srcfile=\"$fix_srcfile_path\" |
| fi |
| qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` |
| case $qsrcfile in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| qsrcfile="\"$qsrcfile\"" ;; |
| esac |
| |
| $run $rm "$libobj" "${libobj}T" |
| |
| # Create a libtool object file (analogous to a ".la" file), |
| # but don't create it if we're doing a dry run. |
| test -z "$run" && cat > ${libobj}T <<EOF |
| # $libobj - a libtool object file |
| # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP |
| # |
| # Please DO NOT delete this file! |
| # It is necessary for linking the library. |
| |
| # Name of the PIC object. |
| EOF |
| |
| # Only build a PIC object if we are building libtool libraries. |
| if test "$build_libtool_libs" = yes; then |
| # Without this assignment, base_compile gets emptied. |
| fbsd_hideous_sh_bug=$base_compile |
| |
| if test "$pic_mode" != no; then |
| command="$base_compile $qsrcfile $pic_flag" |
| else |
| # Don't build PIC code |
| command="$base_compile $qsrcfile" |
| fi |
| |
| if test ! -d "${xdir}$objdir"; then |
| $show "$mkdir ${xdir}$objdir" |
| $run $mkdir ${xdir}$objdir |
| exit_status=$? |
| if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then |
| exit $exit_status |
| fi |
| fi |
| |
| if test -z "$output_obj"; then |
| # Place PIC objects in $objdir |
| command="$command -o $lobj" |
| fi |
| |
| $run $rm "$lobj" "$output_obj" |
| |
| $show "$command" |
| if $run eval "$command"; then : |
| else |
| test -n "$output_obj" && $run $rm $removelist |
| exit $EXIT_FAILURE |
| fi |
| |
| if test "$need_locks" = warn && |
| test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then |
| $echo "\ |
| *** ERROR, $lockfile contains: |
| `cat $lockfile 2>/dev/null` |
| |
| but it should contain: |
| $srcfile |
| |
| This indicates that another process is trying to use the same |
| temporary object file, and libtool could not work around it because |
| your compiler does not support \`-c' and \`-o' together. If you |
| repeat this compilation, it may succeed, by chance, but you had better |
| avoid parallel builds (make -j) in this platform, or get a better |
| compiler." |
| |
| $run $rm $removelist |
| exit $EXIT_FAILURE |
| fi |
| |
| # Just move the object if needed, then go on to compile the next one |
| if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then |
| $show "$mv $output_obj $lobj" |
| if $run $mv $output_obj $lobj; then : |
| else |
| error=$? |
| $run $rm $removelist |
| exit $error |
| fi |
| fi |
| |
| # Append the name of the PIC object to the libtool object file. |
| test -z "$run" && cat >> ${libobj}T <<EOF |
| pic_object='$objdir/$objname' |
| |
| EOF |
| |
| # Allow error messages only from the first compilation. |
| if test "$suppress_opt" = yes; then |
| suppress_output=' >/dev/null 2>&1' |
| fi |
| else |
| # No PIC object so indicate it doesn't exist in the libtool |
| # object file. |
| test -z "$run" && cat >> ${libobj}T <<EOF |
| pic_object=none |
| |
| EOF |
| fi |
| |
| # Only build a position-dependent object if we build old libraries. |
| if test "$build_old_libs" = yes; then |
| if test "$pic_mode" != yes; then |
| # Don't build PIC code |
| command="$base_compile $qsrcfile" |
| else |
| command="$base_compile $qsrcfile $pic_flag" |
| fi |
| if test "$compiler_c_o" = yes; then |
| command="$command -o $obj" |
| fi |
| |
| # Suppress compiler output if we already did a PIC compilation. |
| command="$command$suppress_output" |
| $run $rm "$obj" "$output_obj" |
| $show "$command" |
| if $run eval "$command"; then : |
| else |
| $run $rm $removelist |
| exit $EXIT_FAILURE |
| fi |
| |
| if test "$need_locks" = warn && |
| test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then |
| $echo "\ |
| *** ERROR, $lockfile contains: |
| `cat $lockfile 2>/dev/null` |
| |
| but it should contain: |
| $srcfile |
| |
| This indicates that another process is trying to use the same |
| temporary object file, and libtool could not work around it because |
| your compiler does not support \`-c' and \`-o' together. If you |
| repeat this compilation, it may succeed, by chance, but you had better |
| avoid parallel builds (make -j) in this platform, or get a better |
| compiler." |
| |
| $run $rm $removelist |
| exit $EXIT_FAILURE |
| fi |
| |
| # Just move the object if needed |
| if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then |
| $show "$mv $output_obj $obj" |
| if $run $mv $output_obj $obj; then : |
| else |
| error=$? |
| $run $rm $removelist |
| exit $error |
| fi |
| fi |
| |
| # Append the name of the non-PIC object the libtool object file. |
| # Only append if the libtool object file exists. |
| test -z "$run" && cat >> ${libobj}T <<EOF |
| # Name of the non-PIC object. |
| non_pic_object='$objname' |
| |
| EOF |
| else |
| # Append the name of the non-PIC object the libtool object file. |
| # Only append if the libtool object file exists. |
| test -z "$run" && cat >> ${libobj}T <<EOF |
| # Name of the non-PIC object. |
| non_pic_object=none |
| |
| EOF |
| fi |
| |
| $run $mv "${libobj}T" "${libobj}" |
| |
| # Unlock the critical section if it was locked |
| if test "$need_locks" != no; then |
| $run $rm "$lockfile" |
| fi |
| |
| exit $EXIT_SUCCESS |
| ;; |
| |
| # libtool link mode |
| link | relink) |
| modename="$modename: link" |
| case $host in |
| *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| # It is impossible to link a dll without this setting, and |
| # we shouldn't force the makefile maintainer to figure out |
| # which system we are compiling for in order to pass an extra |
| # flag for every libtool invocation. |
| # allow_undefined=no |
| |
| # FIXME: Unfortunately, there are problems with the above when trying |
| # to make a dll which has undefined symbols, in which case not |
| # even a static library is built. For now, we need to specify |
| # -no-undefined on the libtool link line when we can be certain |
| # that all symbols are satisfied, otherwise we get a static library. |
| allow_undefined=yes |
| ;; |
| *) |
| allow_undefined=yes |
| ;; |
| esac |
| libtool_args="$nonopt" |
| base_compile="$nonopt $@" |
| compile_command="$nonopt" |
| finalize_command="$nonopt" |
| |
| compile_rpath= |
| finalize_rpath= |
| compile_shlibpath= |
| finalize_shlibpath= |
| convenience= |
| old_convenience= |
| deplibs= |
| old_deplibs= |
| compiler_flags= |
| linker_flags= |
| dllsearchpath= |
| lib_search_path=`pwd` |
| inst_prefix_dir= |
| |
| avoid_version=no |
| dlfiles= |
| dlprefiles= |
| dlself=no |
| export_dynamic=no |
| export_symbols= |
| export_symbols_regex= |
| generated= |
| libobjs= |
| ltlibs= |
| module=no |
| no_install=no |
| objs= |
| non_pic_objects= |
| notinst_path= # paths that contain not-installed libtool libraries |
| precious_files_regex= |
| prefer_static_libs=no |
| preload=no |
| prev= |
| prevarg= |
| release= |
| rpath= |
| xrpath= |
| perm_rpath= |
| temp_rpath= |
| thread_safe=no |
| vinfo= |
| vinfo_number=no |
| |
| func_infer_tag $base_compile |
| |
| # We need to know -static, to get the right output filenames. |
| for arg |
| do |
| case $arg in |
| -all-static | -static) |
| if test "X$arg" = "X-all-static"; then |
| if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then |
| $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 |
| fi |
| if test -n "$link_static_flag"; then |
| dlopen_self=$dlopen_self_static |
| fi |
| prefer_static_libs=yes |
| else |
| if test -z "$pic_flag" && test -n "$link_static_flag"; then |
| dlopen_self=$dlopen_self_static |
| fi |
| prefer_static_libs=built |
| fi |
| build_libtool_libs=no |
| build_old_libs=yes |
| break |
| ;; |
| esac |
| done |
| |
| # See if our shared archives depend on static archives. |
| test -n "$old_archive_from_new_cmds" && build_old_libs=yes |
| |
| # Go through the arguments, transforming them on the way. |
| while test "$#" -gt 0; do |
| arg="$1" |
| shift |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test |
| ;; |
| *) qarg=$arg ;; |
| esac |
| libtool_args="$libtool_args $qarg" |
| |
| # If the previous option needs an argument, assign it. |
| if test -n "$prev"; then |
| case $prev in |
| output) |
| compile_command="$compile_command @OUTPUT@" |
| finalize_command="$finalize_command @OUTPUT@" |
| ;; |
| esac |
| |
| case $prev in |
| dlfiles|dlprefiles) |
| if test "$preload" = no; then |
| # Add the symbol object into the linking commands. |
| compile_command="$compile_command @SYMFILE@" |
| finalize_command="$finalize_command @SYMFILE@" |
| preload=yes |
| fi |
| case $arg in |
| *.la | *.lo) ;; # We handle these cases below. |
| force) |
| if test "$dlself" = no; then |
| dlself=needless |
| export_dynamic=yes |
| fi |
| prev= |
| continue |
| ;; |
| self) |
| if test "$prev" = dlprefiles; then |
| dlself=yes |
| elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then |
| dlself=yes |
| else |
| dlself=needless |
| export_dynamic=yes |
| fi |
| prev= |
| continue |
| ;; |
| *) |
| if test "$prev" = dlfiles; then |
| dlfiles="$dlfiles $arg" |
| else |
| dlprefiles="$dlprefiles $arg" |
| fi |
| prev= |
| continue |
| ;; |
| esac |
| ;; |
| expsyms) |
| export_symbols="$arg" |
| if test ! -f "$arg"; then |
| $echo "$modename: symbol file \`$arg' does not exist" |
| exit $EXIT_FAILURE |
| fi |
| prev= |
| continue |
| ;; |
| expsyms_regex) |
| export_symbols_regex="$arg" |
| prev= |
| continue |
| ;; |
| inst_prefix) |
| inst_prefix_dir="$arg" |
| prev= |
| continue |
| ;; |
| precious_regex) |
| precious_files_regex="$arg" |
| prev= |
| continue |
| ;; |
| release) |
| release="-$arg" |
| prev= |
| continue |
| ;; |
| objectlist) |
| if test -f "$arg"; then |
| save_arg=$arg |
| moreargs= |
| for fil in `cat $save_arg` |
| do |
| # moreargs="$moreargs $fil" |
| arg=$fil |
| # A libtool-controlled object. |
| |
| # Check to see that this really is a libtool object. |
| if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then |
| pic_object= |
| non_pic_object= |
| |
| # Read the .lo file |
| # If there is no directory component, then add one. |
| case $arg in |
| */* | *\\*) . $arg ;; |
| *) . ./$arg ;; |
| esac |
| |
| if test -z "$pic_object" || \ |
| test -z "$non_pic_object" || |
| test "$pic_object" = none && \ |
| test "$non_pic_object" = none; then |
| $echo "$modename: cannot find name of object for \`$arg'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Extract subdirectory from the argument. |
| xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$xdir" = "X$arg"; then |
| xdir= |
| else |
| xdir="$xdir/" |
| fi |
| |
| if test "$pic_object" != none; then |
| # Prepend the subdirectory the object is found in. |
| pic_object="$xdir$pic_object" |
| |
| if test "$prev" = dlfiles; then |
| if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then |
| dlfiles="$dlfiles $pic_object" |
| prev= |
| continue |
| else |
| # If libtool objects are unsupported, then we need to preload. |
| prev=dlprefiles |
| fi |
| fi |
| |
| # CHECK ME: I think I busted this. -Ossama |
| if test "$prev" = dlprefiles; then |
| # Preload the old-style object. |
| dlprefiles="$dlprefiles $pic_object" |
| prev= |
| fi |
| |
| # A PIC object. |
| libobjs="$libobjs $pic_object" |
| arg="$pic_object" |
| fi |
| |
| # Non-PIC object. |
| if test "$non_pic_object" != none; then |
| # Prepend the subdirectory the object is found in. |
| non_pic_object="$xdir$non_pic_object" |
| |
| # A standard non-PIC object |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| if test -z "$pic_object" || test "$pic_object" = none ; then |
| arg="$non_pic_object" |
| fi |
| else |
| # If the PIC object exists, use it instead. |
| # $xdir was prepended to $pic_object above. |
| non_pic_object="$pic_object" |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| fi |
| else |
| # Only an error if not doing a dry-run. |
| if test -z "$run"; then |
| $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 |
| exit $EXIT_FAILURE |
| else |
| # Dry-run case. |
| |
| # Extract subdirectory from the argument. |
| xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$xdir" = "X$arg"; then |
| xdir= |
| else |
| xdir="$xdir/" |
| fi |
| |
| pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` |
| non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` |
| libobjs="$libobjs $pic_object" |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| fi |
| fi |
| done |
| else |
| $echo "$modename: link input file \`$save_arg' does not exist" |
| exit $EXIT_FAILURE |
| fi |
| arg=$save_arg |
| prev= |
| continue |
| ;; |
| rpath | xrpath) |
| # We need an absolute path. |
| case $arg in |
| [\\/]* | [A-Za-z]:[\\/]*) ;; |
| *) |
| $echo "$modename: only absolute run-paths are allowed" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| if test "$prev" = rpath; then |
| case "$rpath " in |
| *" $arg "*) ;; |
| *) rpath="$rpath $arg" ;; |
| esac |
| else |
| case "$xrpath " in |
| *" $arg "*) ;; |
| *) xrpath="$xrpath $arg" ;; |
| esac |
| fi |
| prev= |
| continue |
| ;; |
| xcompiler) |
| compiler_flags="$compiler_flags $qarg" |
| prev= |
| compile_command="$compile_command $qarg" |
| finalize_command="$finalize_command $qarg" |
| continue |
| ;; |
| xlinker) |
| linker_flags="$linker_flags $qarg" |
| compiler_flags="$compiler_flags $wl$qarg" |
| prev= |
| compile_command="$compile_command $wl$qarg" |
| finalize_command="$finalize_command $wl$qarg" |
| continue |
| ;; |
| xcclinker) |
| linker_flags="$linker_flags $qarg" |
| compiler_flags="$compiler_flags $qarg" |
| prev= |
| compile_command="$compile_command $qarg" |
| finalize_command="$finalize_command $qarg" |
| continue |
| ;; |
| shrext) |
| shrext_cmds="$arg" |
| prev= |
| continue |
| ;; |
| darwin_framework|darwin_framework_skip) |
| test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| prev= |
| continue |
| ;; |
| *) |
| eval "$prev=\"\$arg\"" |
| prev= |
| continue |
| ;; |
| esac |
| fi # test -n "$prev" |
| |
| prevarg="$arg" |
| |
| case $arg in |
| -all-static) |
| if test -n "$link_static_flag"; then |
| compile_command="$compile_command $link_static_flag" |
| finalize_command="$finalize_command $link_static_flag" |
| fi |
| continue |
| ;; |
| |
| -allow-undefined) |
| # FIXME: remove this flag sometime in the future. |
| $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 |
| continue |
| ;; |
| |
| -avoid-version) |
| avoid_version=yes |
| continue |
| ;; |
| |
| -dlopen) |
| prev=dlfiles |
| continue |
| ;; |
| |
| -dlpreopen) |
| prev=dlprefiles |
| continue |
| ;; |
| |
| -export-dynamic) |
| export_dynamic=yes |
| continue |
| ;; |
| |
| -export-symbols | -export-symbols-regex) |
| if test -n "$export_symbols" || test -n "$export_symbols_regex"; then |
| $echo "$modename: more than one -exported-symbols argument is not allowed" |
| exit $EXIT_FAILURE |
| fi |
| if test "X$arg" = "X-export-symbols"; then |
| prev=expsyms |
| else |
| prev=expsyms_regex |
| fi |
| continue |
| ;; |
| |
| -framework|-arch|-isysroot) |
| case " $CC " in |
| *" ${arg} ${1} "* | *" ${arg} ${1} "*) |
| prev=darwin_framework_skip ;; |
| *) compiler_flags="$compiler_flags $arg" |
| prev=darwin_framework ;; |
| esac |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| continue |
| ;; |
| |
| -inst-prefix-dir) |
| prev=inst_prefix |
| continue |
| ;; |
| |
| # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* |
| # so, if we see these flags be careful not to treat them like -L |
| -L[A-Z][A-Z]*:*) |
| case $with_gcc/$host in |
| no/*-*-irix* | /*-*-irix*) |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| ;; |
| esac |
| continue |
| ;; |
| |
| -L*) |
| dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` |
| # We need an absolute path. |
| case $dir in |
| [\\/]* | [A-Za-z]:[\\/]*) ;; |
| *) |
| absdir=`cd "$dir" && pwd` |
| if test -z "$absdir"; then |
| $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 |
| absdir="$dir" |
| notinst_path="$notinst_path $dir" |
| fi |
| dir="$absdir" |
| ;; |
| esac |
| case "$deplibs " in |
| *" -L$dir "*) ;; |
| *) |
| deplibs="$deplibs -L$dir" |
| lib_search_path="$lib_search_path $dir" |
| ;; |
| esac |
| case $host in |
| *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` |
| case :$dllsearchpath: in |
| *":$dir:"*) ;; |
| *) dllsearchpath="$dllsearchpath:$dir";; |
| esac |
| case :$dllsearchpath: in |
| *":$testbindir:"*) ;; |
| *) dllsearchpath="$dllsearchpath:$testbindir";; |
| esac |
| ;; |
| esac |
| continue |
| ;; |
| |
| -l*) |
| if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then |
| case $host in |
| *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) |
| # These systems don't actually have a C or math library (as such) |
| continue |
| ;; |
| *-*-os2*) |
| # These systems don't actually have a C library (as such) |
| test "X$arg" = "X-lc" && continue |
| ;; |
| *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| # Do not include libc due to us having libc/libc_r. |
| test "X$arg" = "X-lc" && continue |
| ;; |
| *-*-rhapsody* | *-*-darwin1.[012]) |
| # Rhapsody C and math libraries are in the System framework |
| deplibs="$deplibs -framework System" |
| continue |
| ;; |
| *-*-sco3.2v5* | *-*-sco5v6*) |
| # Causes problems with __ctype |
| test "X$arg" = "X-lc" && continue |
| ;; |
| *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) |
| # Compiler inserts libc in the correct place for threads to work |
| test "X$arg" = "X-lc" && continue |
| ;; |
| esac |
| elif test "X$arg" = "X-lc_r"; then |
| case $host in |
| *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| # Do not include libc_r directly, use -pthread flag. |
| continue |
| ;; |
| esac |
| fi |
| deplibs="$deplibs $arg" |
| continue |
| ;; |
| |
| # Tru64 UNIX uses -model [arg] to determine the layout of C++ |
| # classes, name mangling, and exception handling. |
| -model) |
| compile_command="$compile_command $arg" |
| compiler_flags="$compiler_flags $arg" |
| finalize_command="$finalize_command $arg" |
| prev=xcompiler |
| continue |
| ;; |
| |
| -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) |
| compiler_flags="$compiler_flags $arg" |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| continue |
| ;; |
| |
| -module) |
| module=yes |
| continue |
| ;; |
| |
| # -64, -mips[0-9] enable 64-bit mode on the SGI compiler |
| # -r[0-9][0-9]* specifies the processor on the SGI compiler |
| # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler |
| # +DA*, +DD* enable 64-bit mode on the HP compiler |
| # -q* pass through compiler args for the IBM compiler |
| # -m* pass through architecture-specific compiler args for GCC |
| # -m*, -t[45]*, -txscale* pass through architecture-specific |
| # compiler args for GCC |
| # -pg pass through profiling flag for GCC |
| # @file GCC response files |
| -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ |
| -t[45]*|-txscale*|@*) |
| |
| # Unknown arguments in both finalize_command and compile_command need |
| # to be aesthetically quoted because they are evaled later. |
| arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| compiler_flags="$compiler_flags $arg" |
| continue |
| ;; |
| |
| -shrext) |
| prev=shrext |
| continue |
| ;; |
| |
| -no-fast-install) |
| fast_install=no |
| continue |
| ;; |
| |
| -no-install) |
| case $host in |
| *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| # The PATH hackery in wrapper scripts is required on Windows |
| # in order for the loader to find any dlls it needs. |
| $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 |
| $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 |
| fast_install=no |
| ;; |
| *) no_install=yes ;; |
| esac |
| continue |
| ;; |
| |
| -no-undefined) |
| allow_undefined=no |
| continue |
| ;; |
| |
| -objectlist) |
| prev=objectlist |
| continue |
| ;; |
| |
| -o) prev=output ;; |
| |
| -precious-files-regex) |
| prev=precious_regex |
| continue |
| ;; |
| |
| -release) |
| prev=release |
| continue |
| ;; |
| |
| -rpath) |
| prev=rpath |
| continue |
| ;; |
| |
| -R) |
| prev=xrpath |
| continue |
| ;; |
| |
| -R*) |
| dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` |
| # We need an absolute path. |
| case $dir in |
| [\\/]* | [A-Za-z]:[\\/]*) ;; |
| *) |
| $echo "$modename: only absolute run-paths are allowed" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| case "$xrpath " in |
| *" $dir "*) ;; |
| *) xrpath="$xrpath $dir" ;; |
| esac |
| continue |
| ;; |
| |
| -static) |
| # The effects of -static are defined in a previous loop. |
| # We used to do the same as -all-static on platforms that |
| # didn't have a PIC flag, but the assumption that the effects |
| # would be equivalent was wrong. It would break on at least |
| # Digital Unix and AIX. |
| continue |
| ;; |
| |
| -thread-safe) |
| thread_safe=yes |
| continue |
| ;; |
| |
| -version-info) |
| prev=vinfo |
| continue |
| ;; |
| -version-number) |
| prev=vinfo |
| vinfo_number=yes |
| continue |
| ;; |
| |
| -Wc,*) |
| args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` |
| arg= |
| save_ifs="$IFS"; IFS=',' |
| for flag in $args; do |
| IFS="$save_ifs" |
| case $flag in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| flag="\"$flag\"" |
| ;; |
| esac |
| arg="$arg $wl$flag" |
| compiler_flags="$compiler_flags $flag" |
| done |
| IFS="$save_ifs" |
| arg=`$echo "X$arg" | $Xsed -e "s/^ //"` |
| ;; |
| |
| -Wl,*) |
| args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` |
| arg= |
| save_ifs="$IFS"; IFS=',' |
| for flag in $args; do |
| IFS="$save_ifs" |
| case $flag in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| flag="\"$flag\"" |
| ;; |
| esac |
| arg="$arg $wl$flag" |
| compiler_flags="$compiler_flags $wl$flag" |
| linker_flags="$linker_flags $flag" |
| done |
| IFS="$save_ifs" |
| arg=`$echo "X$arg" | $Xsed -e "s/^ //"` |
| ;; |
| |
| -Xcompiler) |
| prev=xcompiler |
| continue |
| ;; |
| |
| -Xlinker) |
| prev=xlinker |
| continue |
| ;; |
| |
| -XCClinker) |
| prev=xcclinker |
| continue |
| ;; |
| |
| # Some other compiler flag. |
| -* | +*) |
| # Unknown arguments in both finalize_command and compile_command need |
| # to be aesthetically quoted because they are evaled later. |
| arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| ;; |
| |
| *.$objext) |
| # A standard object. |
| objs="$objs $arg" |
| ;; |
| |
| *.lo) |
| # A libtool-controlled object. |
| |
| # Check to see that this really is a libtool object. |
| if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then |
| pic_object= |
| non_pic_object= |
| |
| # Read the .lo file |
| # If there is no directory component, then add one. |
| case $arg in |
| */* | *\\*) . $arg ;; |
| *) . ./$arg ;; |
| esac |
| |
| if test -z "$pic_object" || \ |
| test -z "$non_pic_object" || |
| test "$pic_object" = none && \ |
| test "$non_pic_object" = none; then |
| $echo "$modename: cannot find name of object for \`$arg'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Extract subdirectory from the argument. |
| xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$xdir" = "X$arg"; then |
| xdir= |
| else |
| xdir="$xdir/" |
| fi |
| |
| if test "$pic_object" != none; then |
| # Prepend the subdirectory the object is found in. |
| pic_object="$xdir$pic_object" |
| |
| if test "$prev" = dlfiles; then |
| if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then |
| dlfiles="$dlfiles $pic_object" |
| prev= |
| continue |
| else |
| # If libtool objects are unsupported, then we need to preload. |
| prev=dlprefiles |
| fi |
| fi |
| |
| # CHECK ME: I think I busted this. -Ossama |
| if test "$prev" = dlprefiles; then |
| # Preload the old-style object. |
| dlprefiles="$dlprefiles $pic_object" |
| prev= |
| fi |
| |
| # A PIC object. |
| libobjs="$libobjs $pic_object" |
| arg="$pic_object" |
| fi |
| |
| # Non-PIC object. |
| if test "$non_pic_object" != none; then |
| # Prepend the subdirectory the object is found in. |
| non_pic_object="$xdir$non_pic_object" |
| |
| # A standard non-PIC object |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| if test -z "$pic_object" || test "$pic_object" = none ; then |
| arg="$non_pic_object" |
| fi |
| else |
| # If the PIC object exists, use it instead. |
| # $xdir was prepended to $pic_object above. |
| non_pic_object="$pic_object" |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| fi |
| else |
| # Only an error if not doing a dry-run. |
| if test -z "$run"; then |
| $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 |
| exit $EXIT_FAILURE |
| else |
| # Dry-run case. |
| |
| # Extract subdirectory from the argument. |
| xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$xdir" = "X$arg"; then |
| xdir= |
| else |
| xdir="$xdir/" |
| fi |
| |
| pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` |
| non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` |
| libobjs="$libobjs $pic_object" |
| non_pic_objects="$non_pic_objects $non_pic_object" |
| fi |
| fi |
| ;; |
| |
| *.$libext) |
| # An archive. |
| deplibs="$deplibs $arg" |
| old_deplibs="$old_deplibs $arg" |
| continue |
| ;; |
| |
| *.la) |
| # A libtool-controlled library. |
| |
| if test "$prev" = dlfiles; then |
| # This library was specified with -dlopen. |
| dlfiles="$dlfiles $arg" |
| prev= |
| elif test "$prev" = dlprefiles; then |
| # The library was specified with -dlpreopen. |
| dlprefiles="$dlprefiles $arg" |
| prev= |
| else |
| deplibs="$deplibs $arg" |
| fi |
| continue |
| ;; |
| |
| # Some other compiler argument. |
| *) |
| # Unknown arguments in both finalize_command and compile_command need |
| # to be aesthetically quoted because they are evaled later. |
| arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` |
| case $arg in |
| *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| arg="\"$arg\"" |
| ;; |
| esac |
| ;; |
| esac # arg |
| |
| # Now actually substitute the argument into the commands. |
| if test -n "$arg"; then |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| fi |
| done # argument parsing loop |
| |
| if test -n "$prev"; then |
| $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then |
| eval arg=\"$export_dynamic_flag_spec\" |
| compile_command="$compile_command $arg" |
| finalize_command="$finalize_command $arg" |
| fi |
| |
| oldlibs= |
| # calculate the name of the file, without its directory |
| outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` |
| libobjs_save="$libobjs" |
| |
| if test -n "$shlibpath_var"; then |
| # get the directories listed in $shlibpath_var |
| eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` |
| else |
| shlib_search_path= |
| fi |
| eval sys_lib_search_path=\"$sys_lib_search_path_spec\" |
| eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" |
| |
| output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` |
| if test "X$output_objdir" = "X$output"; then |
| output_objdir="$objdir" |
| else |
| output_objdir="$output_objdir/$objdir" |
| fi |
| # Create the object directory. |
| if test ! -d "$output_objdir"; then |
| $show "$mkdir $output_objdir" |
| $run $mkdir $output_objdir |
| exit_status=$? |
| if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then |
| exit $exit_status |
| fi |
| fi |
| |
| # Determine the type of output |
| case $output in |
| "") |
| $echo "$modename: you must specify an output file" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| *.$libext) linkmode=oldlib ;; |
| *.lo | *.$objext) linkmode=obj ;; |
| *.la) linkmode=lib ;; |
| *) linkmode=prog ;; # Anything else should be a program. |
| esac |
| |
| case $host in |
| *cygwin* | *mingw* | *pw32*) |
| # don't eliminate duplications in $postdeps and $predeps |
| duplicate_compiler_generated_deps=yes |
| ;; |
| *) |
| duplicate_compiler_generated_deps=$duplicate_deps |
| ;; |
| esac |
| specialdeplibs= |
| |
| libs= |
| # Find all interdependent deplibs by searching for libraries |
| # that are linked more than once (e.g. -la -lb -la) |
| for deplib in $deplibs; do |
| if test "X$duplicate_deps" = "Xyes" ; then |
| case "$libs " in |
| *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| esac |
| fi |
| libs="$libs $deplib" |
| done |
| |
| if test "$linkmode" = lib; then |
| libs="$predeps $libs $compiler_lib_search_path $postdeps" |
| |
| # Compute libraries that are listed more than once in $predeps |
| # $postdeps and mark them as special (i.e., whose duplicates are |
| # not to be eliminated). |
| pre_post_deps= |
| if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then |
| for pre_post_dep in $predeps $postdeps; do |
| case "$pre_post_deps " in |
| *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; |
| esac |
| pre_post_deps="$pre_post_deps $pre_post_dep" |
| done |
| fi |
| pre_post_deps= |
| fi |
| |
| deplibs= |
| newdependency_libs= |
| newlib_search_path= |
| need_relink=no # whether we're linking any uninstalled libtool libraries |
| notinst_deplibs= # not-installed libtool libraries |
| case $linkmode in |
| lib) |
| passes="conv link" |
| for file in $dlfiles $dlprefiles; do |
| case $file in |
| *.la) ;; |
| *) |
| $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| done |
| ;; |
| prog) |
| compile_deplibs= |
| finalize_deplibs= |
| alldeplibs=no |
| newdlfiles= |
| newdlprefiles= |
| passes="conv scan dlopen dlpreopen link" |
| ;; |
| *) passes="conv" |
| ;; |
| esac |
| for pass in $passes; do |
| if test "$linkmode,$pass" = "lib,link" || |
| test "$linkmode,$pass" = "prog,scan"; then |
| libs="$deplibs" |
| deplibs= |
| fi |
| if test "$linkmode" = prog; then |
| case $pass in |
| dlopen) libs="$dlfiles" ;; |
| dlpreopen) libs="$dlprefiles" ;; |
| link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; |
| esac |
| fi |
| if test "$pass" = dlopen; then |
| # Collect dlpreopened libraries |
| save_deplibs="$deplibs" |
| deplibs= |
| fi |
| for deplib in $libs; do |
| lib= |
| found=no |
| case $deplib in |
| -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) |
| if test "$linkmode,$pass" = "prog,link"; then |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| else |
| compiler_flags="$compiler_flags $deplib" |
| fi |
| continue |
| ;; |
| -l*) |
| if test "$linkmode" != lib && test "$linkmode" != prog; then |
| $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 |
| continue |
| fi |
| name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` |
| for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do |
| for search_ext in .la $std_shrext .so .a; do |
| # Search the libtool library |
| lib="$searchdir/lib${name}${search_ext}" |
| if test -f "$lib"; then |
| if test "$search_ext" = ".la"; then |
| found=yes |
| else |
| found=no |
| fi |
| break 2 |
| fi |
| done |
| done |
| if test "$found" != yes; then |
| # deplib doesn't seem to be a libtool library |
| if test "$linkmode,$pass" = "prog,link"; then |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| else |
| deplibs="$deplib $deplibs" |
| test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" |
| fi |
| continue |
| else # deplib is a libtool library |
| # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, |
| # We need to do some special things here, and not later. |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| case " $predeps $postdeps " in |
| *" $deplib "*) |
| if (${SED} -e '2q' $lib | |
| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then |
| library_names= |
| old_library= |
| case $lib in |
| */* | *\\*) . $lib ;; |
| *) . ./$lib ;; |
| esac |
| for l in $old_library $library_names; do |
| ll="$l" |
| done |
| if test "X$ll" = "X$old_library" ; then # only static version available |
| found=no |
| ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` |
| test "X$ladir" = "X$lib" && ladir="." |
| lib=$ladir/$old_library |
| if test "$linkmode,$pass" = "prog,link"; then |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| else |
| deplibs="$deplib $deplibs" |
| test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" |
| fi |
| continue |
| fi |
| fi |
| ;; |
| *) ;; |
| esac |
| fi |
| fi |
| ;; # -l |
| -L*) |
| case $linkmode in |
| lib) |
| deplibs="$deplib $deplibs" |
| test "$pass" = conv && continue |
| newdependency_libs="$deplib $newdependency_libs" |
| newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` |
| ;; |
| prog) |
| if test "$pass" = conv; then |
| deplibs="$deplib $deplibs" |
| continue |
| fi |
| if test "$pass" = scan; then |
| deplibs="$deplib $deplibs" |
| else |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| fi |
| newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` |
| ;; |
| *) |
| $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 |
| ;; |
| esac # linkmode |
| continue |
| ;; # -L |
| -R*) |
| if test "$pass" = link; then |
| dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` |
| # Make sure the xrpath contains only unique directories. |
| case "$xrpath " in |
| *" $dir "*) ;; |
| *) xrpath="$xrpath $dir" ;; |
| esac |
| fi |
| deplibs="$deplib $deplibs" |
| continue |
| ;; |
| *.la) lib="$deplib" ;; |
| *.$libext) |
| if test "$pass" = conv; then |
| deplibs="$deplib $deplibs" |
| continue |
| fi |
| case $linkmode in |
| lib) |
| valid_a_lib=no |
| case $deplibs_check_method in |
| match_pattern*) |
| set dummy $deplibs_check_method |
| match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` |
| if eval $echo \"$deplib\" 2>/dev/null \ |
| | $SED 10q \ |
| | $EGREP "$match_pattern_regex" > /dev/null; then |
| valid_a_lib=yes |
| fi |
| ;; |
| pass_all) |
| valid_a_lib=yes |
| ;; |
| esac |
| if test "$valid_a_lib" != yes; then |
| $echo |
| $echo "*** Warning: Trying to link with static lib archive $deplib." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which you do not appear to have" |
| $echo "*** because the file extensions .$libext of this argument makes me believe" |
| $echo "*** that it is just a static archive that I should not used here." |
| else |
| $echo |
| $echo "*** Warning: Linking the shared library $output against the" |
| $echo "*** static library $deplib is not portable!" |
| deplibs="$deplib $deplibs" |
| fi |
| continue |
| ;; |
| prog) |
| if test "$pass" != link; then |
| deplibs="$deplib $deplibs" |
| else |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| fi |
| continue |
| ;; |
| esac # linkmode |
| ;; # *.$libext |
| *.lo | *.$objext) |
| if test "$pass" = conv; then |
| deplibs="$deplib $deplibs" |
| elif test "$linkmode" = prog; then |
| if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then |
| # If there is no dlopen support or we're linking statically, |
| # we need to preload. |
| newdlprefiles="$newdlprefiles $deplib" |
| compile_deplibs="$deplib $compile_deplibs" |
| finalize_deplibs="$deplib $finalize_deplibs" |
| else |
| newdlfiles="$newdlfiles $deplib" |
| fi |
| fi |
| continue |
| ;; |
| %DEPLIBS%) |
| alldeplibs=yes |
| continue |
| ;; |
| esac # case $deplib |
| if test "$found" = yes || test -f "$lib"; then : |
| else |
| $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Check to see that this really is a libtool archive. |
| if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : |
| else |
| $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` |
| test "X$ladir" = "X$lib" && ladir="." |
| |
| dlname= |
| dlopen= |
| dlpreopen= |
| libdir= |
| library_names= |
| old_library= |
| # If the library was installed with an old release of libtool, |
| # it will not redefine variables installed, or shouldnotlink |
| installed=yes |
| shouldnotlink=no |
| avoidtemprpath= |
| |
| |
| # Read the .la file |
| case $lib in |
| */* | *\\*) . $lib ;; |
| *) . ./$lib ;; |
| esac |
| |
| if test "$linkmode,$pass" = "lib,link" || |
| test "$linkmode,$pass" = "prog,scan" || |
| { test "$linkmode" != prog && test "$linkmode" != lib; }; then |
| test -n "$dlopen" && dlfiles="$dlfiles $dlopen" |
| test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" |
| fi |
| |
| if test "$pass" = conv; then |
| # Only check for convenience libraries |
| deplibs="$lib $deplibs" |
| if test -z "$libdir"; then |
| if test -z "$old_library"; then |
| $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| # It is a libtool convenience library, so add in its objects. |
| convenience="$convenience $ladir/$objdir/$old_library" |
| old_convenience="$old_convenience $ladir/$objdir/$old_library" |
| tmp_libs= |
| for deplib in $dependency_libs; do |
| deplibs="$deplib $deplibs" |
| if test "X$duplicate_deps" = "Xyes" ; then |
| case "$tmp_libs " in |
| *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| esac |
| fi |
| tmp_libs="$tmp_libs $deplib" |
| done |
| elif test "$linkmode" != prog && test "$linkmode" != lib; then |
| $echo "$modename: \`$lib' is not a convenience library" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| continue |
| fi # $pass = conv |
| |
| |
| # Get the name of the library we link against. |
| linklib= |
| for l in $old_library $library_names; do |
| linklib="$l" |
| done |
| if test -z "$linklib"; then |
| $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # This library was specified with -dlopen. |
| if test "$pass" = dlopen; then |
| if test -z "$libdir"; then |
| $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| if test -z "$dlname" || |
| test "$dlopen_support" != yes || |
| test "$build_libtool_libs" = no; then |
| # If there is no dlname, no dlopen support or we're linking |
| # statically, we need to preload. We also need to preload any |
| # dependent libraries so libltdl's deplib preloader doesn't |
| # bomb out in the load deplibs phase. |
| dlprefiles="$dlprefiles $lib $dependency_libs" |
| else |
| newdlfiles="$newdlfiles $lib" |
| fi |
| continue |
| fi # $pass = dlopen |
| |
| # We need an absolute path. |
| case $ladir in |
| [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; |
| *) |
| abs_ladir=`cd "$ladir" && pwd` |
| if test -z "$abs_ladir"; then |
| $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 |
| $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 |
| abs_ladir="$ladir" |
| fi |
| ;; |
| esac |
| laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` |
| |
| # Find the relevant object directory and library name. |
| if test "X$installed" = Xyes; then |
| if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then |
| $echo "$modename: warning: library \`$lib' was moved." 1>&2 |
| dir="$ladir" |
| absdir="$abs_ladir" |
| libdir="$abs_ladir" |
| else |
| dir="$libdir" |
| absdir="$libdir" |
| fi |
| test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes |
| else |
| if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then |
| dir="$ladir" |
| absdir="$abs_ladir" |
| # Remove this search path later |
| notinst_path="$notinst_path $abs_ladir" |
| else |
| dir="$ladir/$objdir" |
| absdir="$abs_ladir/$objdir" |
| # Remove this search path later |
| notinst_path="$notinst_path $abs_ladir" |
| fi |
| fi # $installed = yes |
| name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` |
| |
| # This library was specified with -dlpreopen. |
| if test "$pass" = dlpreopen; then |
| if test -z "$libdir"; then |
| $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| # Prefer using a static library (so that no silly _DYNAMIC symbols |
| # are required to link). |
| if test -n "$old_library"; then |
| newdlprefiles="$newdlprefiles $dir/$old_library" |
| # Otherwise, use the dlname, so that lt_dlopen finds it. |
| elif test -n "$dlname"; then |
| newdlprefiles="$newdlprefiles $dir/$dlname" |
| else |
| newdlprefiles="$newdlprefiles $dir/$linklib" |
| fi |
| fi # $pass = dlpreopen |
| |
| if test -z "$libdir"; then |
| # Link the convenience library |
| if test "$linkmode" = lib; then |
| deplibs="$dir/$old_library $deplibs" |
| elif test "$linkmode,$pass" = "prog,link"; then |
| compile_deplibs="$dir/$old_library $compile_deplibs" |
| finalize_deplibs="$dir/$old_library $finalize_deplibs" |
| else |
| deplibs="$lib $deplibs" # used for prog,scan pass |
| fi |
| continue |
| fi |
| |
| |
| if test "$linkmode" = prog && test "$pass" != link; then |
| newlib_search_path="$newlib_search_path $ladir" |
| deplibs="$lib $deplibs" |
| |
| linkalldeplibs=no |
| if test "$link_all_deplibs" != no || test -z "$library_names" || |
| test "$build_libtool_libs" = no; then |
| linkalldeplibs=yes |
| fi |
| |
| tmp_libs= |
| for deplib in $dependency_libs; do |
| case $deplib in |
| -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test |
| esac |
| # Need to link against all dependency_libs? |
| if test "$linkalldeplibs" = yes; then |
| deplibs="$deplib $deplibs" |
| else |
| # Need to hardcode shared library paths |
| # or/and link against static libraries |
| newdependency_libs="$deplib $newdependency_libs" |
| fi |
| if test "X$duplicate_deps" = "Xyes" ; then |
| case "$tmp_libs " in |
| *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| esac |
| fi |
| tmp_libs="$tmp_libs $deplib" |
| done # for deplib |
| continue |
| fi # $linkmode = prog... |
| |
| if test "$linkmode,$pass" = "prog,link"; then |
| if test -n "$library_names" && |
| { test "$prefer_static_libs" = no || test -z "$old_library"; }; then |
| # We need to hardcode the library path |
| if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then |
| # Make sure the rpath contains only unique directories. |
| case "$temp_rpath " in |
| *" $dir "*) ;; |
| *" $absdir "*) ;; |
| *) temp_rpath="$temp_rpath $absdir" ;; |
| esac |
| fi |
| |
| # Hardcode the library path. |
| # Skip directories that are in the system default run-time |
| # search path. |
| case " $sys_lib_dlsearch_path " in |
| *" $absdir "*) ;; |
| *) |
| case "$compile_rpath " in |
| *" $absdir "*) ;; |
| *) compile_rpath="$compile_rpath $absdir" |
| esac |
| ;; |
| esac |
| case " $sys_lib_dlsearch_path " in |
| *" $libdir "*) ;; |
| *) |
| case "$finalize_rpath " in |
| *" $libdir "*) ;; |
| *) finalize_rpath="$finalize_rpath $libdir" |
| esac |
| ;; |
| esac |
| fi # $linkmode,$pass = prog,link... |
| |
| if test "$alldeplibs" = yes && |
| { test "$deplibs_check_method" = pass_all || |
| { test "$build_libtool_libs" = yes && |
| test -n "$library_names"; }; }; then |
| # We only need to search for static libraries |
| continue |
| fi |
| fi |
| |
| link_static=no # Whether the deplib will be linked statically |
| use_static_libs=$prefer_static_libs |
| if test "$use_static_libs" = built && test "$installed" = yes ; then |
| use_static_libs=no |
| fi |
| if test -n "$library_names" && |
| { test "$use_static_libs" = no || test -z "$old_library"; }; then |
| if test "$installed" = no; then |
| notinst_deplibs="$notinst_deplibs $lib" |
| need_relink=yes |
| fi |
| # This is a shared library |
| |
| # Warn about portability, can't link against -module's on |
| # some systems (darwin) |
| if test "$shouldnotlink" = yes && test "$pass" = link ; then |
| $echo |
| if test "$linkmode" = prog; then |
| $echo "*** Warning: Linking the executable $output against the loadable module" |
| else |
| $echo "*** Warning: Linking the shared library $output against the loadable module" |
| fi |
| $echo "*** $linklib is not portable!" |
| fi |
| if test "$linkmode" = lib && |
| test "$hardcode_into_libs" = yes; then |
| # Hardcode the library path. |
| # Skip directories that are in the system default run-time |
| # search path. |
| case " $sys_lib_dlsearch_path " in |
| *" $absdir "*) ;; |
| *) |
| case "$compile_rpath " in |
| *" $absdir "*) ;; |
| *) compile_rpath="$compile_rpath $absdir" |
| esac |
| ;; |
| esac |
| case " $sys_lib_dlsearch_path " in |
| *" $libdir "*) ;; |
| *) |
| case "$finalize_rpath " in |
| *" $libdir "*) ;; |
| *) finalize_rpath="$finalize_rpath $libdir" |
| esac |
| ;; |
| esac |
| fi |
| |
| if test -n "$old_archive_from_expsyms_cmds"; then |
| # figure out the soname |
| set dummy $library_names |
| realname="$2" |
| shift; shift |
| libname=`eval \\$echo \"$libname_spec\"` |
| # use dlname if we got it. it's perfectly good, no? |
| if test -n "$dlname"; then |
| soname="$dlname" |
| elif test -n "$soname_spec"; then |
| # bleh windows |
| case $host in |
| *cygwin* | mingw*) |
| major=`expr $current - $age` |
| versuffix="-$major" |
| ;; |
| esac |
| eval soname=\"$soname_spec\" |
| else |
| soname="$realname" |
| fi |
| |
| # Make a new name for the extract_expsyms_cmds to use |
| soroot="$soname" |
| soname=`$echo $soroot | ${SED} -e 's/^.*\///'` |
| newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" |
| |
| # If the library has no export list, then create one now |
| if test -f "$output_objdir/$soname-def"; then : |
| else |
| $show "extracting exported symbol list from \`$soname'" |
| save_ifs="$IFS"; IFS='~' |
| cmds=$extract_expsyms_cmds |
| for cmd in $cmds; do |
| IFS="$save_ifs" |
| eval cmd=\"$cmd\" |
| $show "$cmd" |
| $run eval "$cmd" || exit $? |
| done |
| IFS="$save_ifs" |
| fi |
| |
| # Create $newlib |
| if test -f "$output_objdir/$newlib"; then :; else |
| $show "generating import library for \`$soname'" |
| save_ifs="$IFS"; IFS='~' |
| cmds=$old_archive_from_expsyms_cmds |
| for cmd in $cmds; do |
| IFS="$save_ifs" |
| eval cmd=\"$cmd\" |
| $show "$cmd" |
| $run eval "$cmd" || exit $? |
| done |
| IFS="$save_ifs" |
| fi |
| # make sure the library variables are pointing to the new library |
| dir=$output_objdir |
| linklib=$newlib |
| fi # test -n "$old_archive_from_expsyms_cmds" |
| |
| if test "$linkmode" = prog || test "$mode" != relink; then |
| add_shlibpath= |
| add_dir= |
| add= |
| lib_linked=yes |
| case $hardcode_action in |
| immediate | unsupported) |
| if test "$hardcode_direct" = no; then |
| add="$dir/$linklib" |
| case $host in |
| *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; |
| *-*-sysv4*uw2*) add_dir="-L$dir" ;; |
| *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ |
| *-*-unixware7*) add_dir="-L$dir" ;; |
| *-*-darwin* ) |
| # if the lib is a module then we can not link against |
| # it, someone is ignoring the new warnings I added |
| if /usr/bin/file -L $add 2> /dev/null | |
| $EGREP ": [^:]* bundle" >/dev/null ; then |
| $echo "** Warning, lib $linklib is a module, not a shared library" |
| if test -z "$old_library" ; then |
| $echo |
| $echo "** And there doesn't seem to be a static archive available" |
| $echo "** The link will probably fail, sorry" |
| else |
| add="$dir/$old_library" |
| fi |
| fi |
| esac |
| elif test "$hardcode_minus_L" = no; then |
| case $host in |
| *-*-sunos*) add_shlibpath="$dir" ;; |
| esac |
| add_dir="-L$dir" |
| add="-l$name" |
| elif test "$hardcode_shlibpath_var" = no; then |
| add_shlibpath="$dir" |
| add="-l$name" |
| else |
| lib_linked=no |
| fi |
| ;; |
| relink) |
| if test "$hardcode_direct" = yes; then |
| add="$dir/$linklib" |
| elif test "$hardcode_minus_L" = yes; then |
| add_dir="-L$dir" |
| # Try looking first in the location we're being installed to. |
| if test -n "$inst_prefix_dir"; then |
| case $libdir in |
| [\\/]*) |
| add_dir="$add_dir -L$inst_prefix_dir$libdir" |
| ;; |
| esac |
| fi |
| add="-l$name" |
| elif test "$hardcode_shlibpath_var" = yes; then |
| add_shlibpath="$dir" |
| add="-l$name" |
| else |
| lib_linked=no |
| fi |
| ;; |
| *) lib_linked=no ;; |
| esac |
| |
| if test "$lib_linked" != yes; then |
| $echo "$modename: configuration error: unsupported hardcode properties" |
| exit $EXIT_FAILURE |
| fi |
| |
| if test -n "$add_shlibpath"; then |
| case :$compile_shlibpath: in |
| *":$add_shlibpath:"*) ;; |
| *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; |
| esac |
| fi |
| if test "$linkmode" = prog; then |
| test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" |
| test -n "$add" && compile_deplibs="$add $compile_deplibs" |
| else |
| test -n "$add_dir" && deplibs="$add_dir $deplibs" |
| test -n "$add" && deplibs="$add $deplibs" |
| if test "$hardcode_direct" != yes && \ |
| test "$hardcode_minus_L" != yes && \ |
| test "$hardcode_shlibpath_var" = yes; then |
| case :$finalize_shlibpath: in |
| *":$libdir:"*) ;; |
| *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; |
| esac |
| fi |
| fi |
| fi |
| |
| if test "$linkmode" = prog || test "$mode" = relink; then |
| add_shlibpath= |
| add_dir= |
| add= |
| # Finalize command for both is simple: just hardcode it. |
| if test "$hardcode_direct" = yes; then |
| add="$libdir/$linklib" |
| elif test "$hardcode_minus_L" = yes; then |
| add_dir="-L$libdir" |
| add="-l$name" |
| elif test "$hardcode_shlibpath_var" = yes; then |
| case :$finalize_shlibpath: in |
| *":$libdir:"*) ;; |
| *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; |
| esac |
| add="-l$name" |
| elif test "$hardcode_automatic" = yes; then |
| if test -n "$inst_prefix_dir" && |
| test -f "$inst_prefix_dir$libdir/$linklib" ; then |
| add="$inst_prefix_dir$libdir/$linklib" |
| else |
| add="$libdir/$linklib" |
| fi |
| else |
| # We cannot seem to hardcode it, guess we'll fake it. |
| add_dir="-L$libdir" |
| # Try looking first in the location we're being installed to. |
| if test -n "$inst_prefix_dir"; then |
| case $libdir in |
| [\\/]*) |
| add_dir="$add_dir -L$inst_prefix_dir$libdir" |
| ;; |
| esac |
| fi |
| add="-l$name" |
| fi |
| |
| if test "$linkmode" = prog; then |
| test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" |
| test -n "$add" && finalize_deplibs="$add $finalize_deplibs" |
| else |
| test -n "$add_dir" && deplibs="$add_dir $deplibs" |
| test -n "$add" && deplibs="$add $deplibs" |
| fi |
| fi |
| elif test "$linkmode" = prog; then |
| # Here we assume that one of hardcode_direct or hardcode_minus_L |
| # is not unsupported. This is valid on all known static and |
| # shared platforms. |
| if test "$hardcode_direct" != unsupported; then |
| test -n "$old_library" && linklib="$old_library" |
| compile_deplibs="$dir/$linklib $compile_deplibs" |
| finalize_deplibs="$dir/$linklib $finalize_deplibs" |
| else |
| compile_deplibs="-l$name -L$dir $compile_deplibs" |
| finalize_deplibs="-l$name -L$dir $finalize_deplibs" |
| fi |
| elif test "$build_libtool_libs" = yes; then |
| # Not a shared library |
| if test "$deplibs_check_method" != pass_all; then |
| # We're trying link a shared library against a static one |
| # but the system doesn't support it. |
| |
| # Just print a warning and add the library to dependency_libs so |
| # that the program can be linked against the static library. |
| $echo |
| $echo "*** Warning: This system can not link to static lib archive $lib." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which you do not appear to have." |
| if test "$module" = yes; then |
| $echo "*** But as you try to build a module library, libtool will still create " |
| $echo "*** a static module, that should work as long as the dlopening application" |
| $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." |
| if test -z "$global_symbol_pipe"; then |
| $echo |
| $echo "*** However, this would only work if libtool was able to extract symbol" |
| $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" |
| $echo "*** not find such a program. So, this module is probably useless." |
| $echo "*** \`nm' from GNU binutils and a full rebuild may help." |
| fi |
| if test "$build_old_libs" = no; then |
| build_libtool_libs=module |
| build_old_libs=yes |
| else |
| build_libtool_libs=no |
| fi |
| fi |
| else |
| deplibs="$dir/$old_library $deplibs" |
| link_static=yes |
| fi |
| fi # link shared/static library? |
| |
| if test "$linkmode" = lib; then |
| if test -n "$dependency_libs" && |
| { test "$hardcode_into_libs" != yes || |
| test "$build_old_libs" = yes || |
| test "$link_static" = yes; }; then |
| # Extract -R from dependency_libs |
| temp_deplibs= |
| for libdir in $dependency_libs; do |
| case $libdir in |
| -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` |
| case " $xrpath " in |
| *" $temp_xrpath "*) ;; |
| *) xrpath="$xrpath $temp_xrpath";; |
| esac;; |
| *) temp_deplibs="$temp_deplibs $libdir";; |
| esac |
| done |
| dependency_libs="$temp_deplibs" |
| fi |
| |
| newlib_search_path="$newlib_search_path $absdir" |
| # Link against this library |
| test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" |
| # ... and its dependency_libs |
| tmp_libs= |
| for deplib in $dependency_libs; do |
| newdependency_libs="$deplib $newdependency_libs" |
| if test "X$duplicate_deps" = "Xyes" ; then |
| case "$tmp_libs " in |
| *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| esac |
| fi |
| tmp_libs="$tmp_libs $deplib" |
| done |
| |
| if test "$link_all_deplibs" != no; then |
| # Add the search paths of all dependency libraries |
| for deplib in $dependency_libs; do |
| case $deplib in |
| -L*) path="$deplib" ;; |
| *.la) |
| dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` |
| test "X$dir" = "X$deplib" && dir="." |
| # We need an absolute path. |
| case $dir in |
| [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; |
| *) |
| absdir=`cd "$dir" && pwd` |
| if test -z "$absdir"; then |
| $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 |
| absdir="$dir" |
| fi |
| ;; |
| esac |
| if grep "^installed=no" $deplib > /dev/null; then |
| path="$absdir/$objdir" |
| else |
| eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` |
| if test -z "$libdir"; then |
| $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| if test "$absdir" != "$libdir"; then |
| $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 |
| fi |
| path="$absdir" |
| fi |
| depdepl= |
| case $host in |
| *-*-darwin*) |
| # we do not want to link against static libs, |
| # but need to link against shared |
| eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` |
| if test -n "$deplibrary_names" ; then |
| for tmp in $deplibrary_names ; do |
| depdepl=$tmp |
| done |
| if test -f "$path/$depdepl" ; then |
| depdepl="$path/$depdepl" |
| fi |
| # do not add paths which are already there |
| case " $newlib_search_path " in |
| *" $path "*) ;; |
| *) newlib_search_path="$newlib_search_path $path";; |
| esac |
| fi |
| path="" |
| ;; |
| *) |
| path="-L$path" |
| ;; |
| esac |
| ;; |
| -l*) |
| case $host in |
| *-*-darwin*) |
| # Again, we only want to link against shared libraries |
| eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` |
| for tmp in $newlib_search_path ; do |
| if test -f "$tmp/lib$tmp_libs.dylib" ; then |
| eval depdepl="$tmp/lib$tmp_libs.dylib" |
| break |
| fi |
| done |
| path="" |
| ;; |
| *) continue ;; |
| esac |
| ;; |
| *) continue ;; |
| esac |
| case " $deplibs " in |
| *" $path "*) ;; |
| *) deplibs="$path $deplibs" ;; |
| esac |
| case " $deplibs " in |
| *" $depdepl "*) ;; |
| *) deplibs="$depdepl $deplibs" ;; |
| esac |
| done |
| fi # link_all_deplibs != no |
| fi # linkmode = lib |
| done # for deplib in $libs |
| dependency_libs="$newdependency_libs" |
| if test "$pass" = dlpreopen; then |
| # Link the dlpreopened libraries before other libraries |
| for deplib in $save_deplibs; do |
| deplibs="$deplib $deplibs" |
| done |
| fi |
| if test "$pass" != dlopen; then |
| if test "$pass" != conv; then |
| # Make sure lib_search_path contains only unique directories. |
| lib_search_path= |
| for dir in $newlib_search_path; do |
| case "$lib_search_path " in |
| *" $dir "*) ;; |
| *) lib_search_path="$lib_search_path $dir" ;; |
| esac |
| done |
| newlib_search_path= |
| fi |
| |
| if test "$linkmode,$pass" != "prog,link"; then |
| vars="deplibs" |
| else |
| vars="compile_deplibs finalize_deplibs" |
| fi |
| for var in $vars dependency_libs; do |
| # Add libraries to $var in reverse order |
| eval tmp_libs=\"\$$var\" |
| new_libs= |
| for deplib in $tmp_libs; do |
| # FIXME: Pedantically, this is the right thing to do, so |
| # that some nasty dependency loop isn't accidentally |
| # broken: |
| #new_libs="$deplib $new_libs" |
| # Pragmatically, this seems to cause very few problems in |
| # practice: |
| case $deplib in |
| -L*) new_libs="$deplib $new_libs" ;; |
| -R*) ;; |
| *) |
| # And here is the reason: when a library appears more |
| # than once as an explicit dependence of a library, or |
| # is implicitly linked in more than once by the |
| # compiler, it is considered special, and multiple |
| # occurrences thereof are not removed. Compare this |
| # with having the same library being listed as a |
| # dependency of multiple other libraries: in this case, |
| # we know (pedantically, we assume) the library does not |
| # need to be listed more than once, so we keep only the |
| # last copy. This is not always right, but it is rare |
| # enough that we require users that really mean to play |
| # such unportable linking tricks to link the library |
| # using -Wl,-lname, so that libtool does not consider it |
| # for duplicate removal. |
| case " $specialdeplibs " in |
| *" $deplib "*) new_libs="$deplib $new_libs" ;; |
| *) |
| case " $new_libs " in |
| *" $deplib "*) ;; |
| *) new_libs="$deplib $new_libs" ;; |
| esac |
| ;; |
| esac |
| ;; |
| esac |
| done |
| tmp_libs= |
| for deplib in $new_libs; do |
| case $deplib in |
| -L*) |
| case " $tmp_libs " in |
| *" $deplib "*) ;; |
| *) tmp_libs="$tmp_libs $deplib" ;; |
| esac |
| ;; |
| *) tmp_libs="$tmp_libs $deplib" ;; |
| esac |
| done |
| eval $var=\"$tmp_libs\" |
| done # for var |
| fi |
| # Last step: remove runtime libs from dependency_libs |
| # (they stay in deplibs) |
| tmp_libs= |
| for i in $dependency_libs ; do |
| case " $predeps $postdeps $compiler_lib_search_path " in |
| *" $i "*) |
| i="" |
| ;; |
| esac |
| if test -n "$i" ; then |
| tmp_libs="$tmp_libs $i" |
| fi |
| done |
| dependency_libs=$tmp_libs |
| done # for pass |
| if test "$linkmode" = prog; then |
| dlfiles="$newdlfiles" |
| dlprefiles="$newdlprefiles" |
| fi |
| |
| case $linkmode in |
| oldlib) |
| if test -n "$deplibs"; then |
| $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then |
| $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$rpath"; then |
| $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$xrpath"; then |
| $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$vinfo"; then |
| $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$release"; then |
| $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 |
| fi |
| |
| if test -n "$export_symbols" || test -n "$export_symbols_regex"; then |
| $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 |
| fi |
| |
| # Now set the variables for building old libraries. |
| build_libtool_libs=no |
| oldlibs="$output" |
| objs="$objs$old_deplibs" |
| ;; |
| |
| lib) |
| # Make sure we only generate libraries of the form `libNAME.la'. |
| case $outputname in |
| lib*) |
| name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` |
| eval shared_ext=\"$shrext_cmds\" |
| eval libname=\"$libname_spec\" |
| ;; |
| *) |
| if test "$module" = no; then |
| $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| if test "$need_lib_prefix" != no; then |
| # Add the "lib" prefix for modules if required |
| name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` |
| eval shared_ext=\"$shrext_cmds\" |
| eval libname=\"$libname_spec\" |
| else |
| libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` |
| fi |
| ;; |
| esac |
| |
| if test -n "$objs"; then |
| if test "$deplibs_check_method" != pass_all; then |
| $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 |
| exit $EXIT_FAILURE |
| else |
| $echo |
| $echo "*** Warning: Linking the shared library $output against the non-libtool" |
| $echo "*** objects $objs is not portable!" |
| libobjs="$libobjs $objs" |
| fi |
| fi |
| |
| if test "$dlself" != no; then |
| $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 |
| fi |
| |
| set dummy $rpath |
| if test "$#" -gt 2; then |
| $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 |
| fi |
| install_libdir="$2" |
| |
| oldlibs= |
| if test -z "$rpath"; then |
| if test "$build_libtool_libs" = yes; then |
| # Building a libtool convenience library. |
| # Some compilers have problems with a `.al' extension so |
| # convenience libraries should have the same extension an |
| # archive normally would. |
| oldlibs="$output_objdir/$libname.$libext $oldlibs" |
| build_libtool_libs=convenience |
| build_old_libs=yes |
| fi |
| |
| if test -n "$vinfo"; then |
| $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 |
| fi |
| |
| if test -n "$release"; then |
| $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 |
| fi |
| else |
| |
| # Parse the version information argument. |
| save_ifs="$IFS"; IFS=':' |
| set dummy $vinfo 0 0 0 |
| IFS="$save_ifs" |
| |
| if test -n "$8"; then |
| $echo "$modename: too many parameters to \`-version-info'" 1>&2 |
| $echo "$help" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # convert absolute version numbers to libtool ages |
| # this retains compatibility with .la files and attempts |
| # to make the code below a bit more comprehensible |
| |
| case $vinfo_number in |
| yes) |
| number_major="$2" |
| number_minor="$3" |
| number_revision="$4" |
| # |
| # There are really only two kinds -- those that |
| # use the current revision as the major version |
| # and those that subtract age and use age as |
| # a minor version. But, then there is irix |
| # which has an extra 1 added just for fun |
| # |
| case $version_type in |
| darwin|linux|osf|windows) |
| current=`expr $number_major + $number_minor` |
| age="$number_minor" |
| revision="$number_revision" |
| ;; |
| freebsd-aout|freebsd-elf|sunos) |
| current="$number_major" |
| revision="$number_minor" |
| age="0" |
| ;; |
| irix|nonstopux) |
| current=`expr $number_major + $number_minor - 1` |
| age="$number_minor" |
| revision="$number_minor" |
| ;; |
| esac |
| ;; |
| no) |
| current="$2" |
| revision="$3" |
| age="$4" |
| ;; |
| esac |
| |
| # Check that each of the things are valid numbers. |
| case $current in |
| 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| *) |
| $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 |
| $echo "$modename: \`$vinfo' is not valid version information" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| case $revision in |
| 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| *) |
| $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 |
| $echo "$modename: \`$vinfo' is not valid version information" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| case $age in |
| 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| *) |
| $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 |
| $echo "$modename: \`$vinfo' is not valid version information" 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| if test "$age" -gt "$current"; then |
| $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 |
| $echo "$modename: \`$vinfo' is not valid version information" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| |
| # Calculate the version variables. |
| major= |
| versuffix= |
| verstring= |
| case $version_type in |
| none) ;; |
| |
| darwin) |
| # Like Linux, but with the current version available in |
| # verstring for coding it into the library header |
| major=.`expr $current - $age` |
| versuffix="$major.$age.$revision" |
| # Darwin ld doesn't like 0 for these options... |
| minor_current=`expr $current + 1` |
| verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" |
| ;; |
| |
| freebsd-aout) |
| major=".$current" |
| versuffix=".$current.$revision"; |
| ;; |
| |
| freebsd-elf) |
| major=".$current" |
| versuffix=".$current"; |
| ;; |
| |
| irix | nonstopux) |
| major=`expr $current - $age + 1` |
| |
| case $version_type in |
| nonstopux) verstring_prefix=nonstopux ;; |
| *) verstring_prefix=sgi ;; |
| esac |
| verstring="$verstring_prefix$major.$revision" |
| |
| # Add in all the interfaces that we are compatible with. |
| loop=$revision |
| while test "$loop" -ne 0; do |
| iface=`expr $revision - $loop` |
| loop=`expr $loop - 1` |
| verstring="$verstring_prefix$major.$iface:$verstring" |
| done |
| |
| # Before this point, $major must not contain `.'. |
| major=.$major |
| versuffix="$major.$revision" |
| ;; |
| |
| linux) |
| major=.`expr $current - $age` |
| versuffix="$major.$age.$revision" |
| ;; |
| |
| osf) |
| major=.`expr $current - $age` |
| versuffix=".$current.$age.$revision" |
| verstring="$current.$age.$revision" |
| |
| # Add in all the interfaces that we are compatible with. |
| loop=$age |
| while test "$loop" -ne 0; do |
| iface=`expr $current - $loop` |
| loop=`expr $loop - 1` |
| verstring="$verstring:${iface}.0" |
| done |
| |
| # Make executables depend on our current version. |
| verstring="$verstring:${current}.0" |
| ;; |
| |
| sunos) |
| major=".$current" |
| versuffix=".$current.$revision" |
| ;; |
| |
| windows) |
| # Use '-' rather than '.', since we only want one |
| # extension on DOS 8.3 filesystems. |
| major=`expr $current - $age` |
| versuffix="-$major" |
| ;; |
| |
| *) |
| $echo "$modename: unknown library version type \`$version_type'" 1>&2 |
| $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 |
| exit $EXIT_FAILURE |
| ;; |
| esac |
| |
| # Clear the version info if we defaulted, and they specified a release. |
| if test -z "$vinfo" && test -n "$release"; then |
| major= |
| case $version_type in |
| darwin) |
| # we can't check for "0.0" in archive_cmds due to quoting |
| # problems, so we reset it completely |
| verstring= |
| ;; |
| *) |
| verstring="0.0" |
| ;; |
| esac |
| if test "$need_version" = no; then |
| versuffix= |
| else |
| versuffix=".0.0" |
| fi |
| fi |
| |
| # Remove version info from name if versioning should be avoided |
| if test "$avoid_version" = yes && test "$need_version" = no; then |
| major= |
| versuffix= |
| verstring="" |
| fi |
| |
| # Check to see if the archive will have undefined symbols. |
| if test "$allow_undefined" = yes; then |
| if test "$allow_undefined_flag" = unsupported; then |
| $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 |
| build_libtool_libs=no |
| build_old_libs=yes |
| fi |
| else |
| # Don't allow undefined symbols. |
| allow_undefined_flag="$no_undefined_flag" |
| fi |
| fi |
| |
| if test "$mode" != relink; then |
| # Remove our outputs, but don't remove object files since they |
| # may have been created when compiling PIC objects. |
| removelist= |
| tempremovelist=`$echo "$output_objdir/*"` |
| for p in $tempremovelist; do |
| case $p in |
| *.$objext) |
| ;; |
| $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) |
| if test "X$precious_files_regex" != "X"; then |
| if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 |
| then |
| continue |
| fi |
| fi |
| removelist="$removelist $p" |
| ;; |
| *) ;; |
| esac |
| done |
| if test -n "$removelist"; then |
| $show "${rm}r $removelist" |
| $run ${rm}r $removelist |
| fi |
| fi |
| |
| # Now set the variables for building old libraries. |
| if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then |
| oldlibs="$oldlibs $output_objdir/$libname.$libext" |
| |
| # Transform .lo files to .o files. |
| oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` |
| fi |
| |
| # Eliminate all temporary directories. |
| for path in $notinst_path; do |
| lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` |
| deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` |
| dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` |
| done |
| |
| if test -n "$xrpath"; then |
| # If the user specified any rpath flags, then add them. |
| temp_xrpath= |
| for libdir in $xrpath; do |
| temp_xrpath="$temp_xrpath -R$libdir" |
| case "$finalize_rpath " in |
| *" $libdir "*) ;; |
| *) finalize_rpath="$finalize_rpath $libdir" ;; |
| esac |
| done |
| if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then |
| dependency_libs="$temp_xrpath $dependency_libs" |
| fi |
| fi |
| |
| # Make sure dlfiles contains only unique files that won't be dlpreopened |
| old_dlfiles="$dlfiles" |
| dlfiles= |
| for lib in $old_dlfiles; do |
| case " $dlprefiles $dlfiles " in |
| *" $lib "*) ;; |
| *) dlfiles="$dlfiles $lib" ;; |
| esac |
| done |
| |
| # Make sure dlprefiles contains only unique files |
| old_dlprefiles="$dlprefiles" |
| dlprefiles= |
| for lib in $old_dlprefiles; do |
| case "$dlprefiles " in |
| *" $lib "*) ;; |
| *) dlprefiles="$dlprefiles $lib" ;; |
| esac |
| done |
| |
| if test "$build_libtool_libs" = yes; then |
| if test -n "$rpath"; then |
| case $host in |
| *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) |
| # these systems don't actually have a c library (as such)! |
| ;; |
| *-*-rhapsody* | *-*-darwin1.[012]) |
| # Rhapsody C library is in the System framework |
| deplibs="$deplibs -framework System" |
| ;; |
| *-*-netbsd*) |
| # Don't link with libc until the a.out ld.so is fixed. |
| ;; |
| *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| # Do not include libc due to us having libc/libc_r. |
| ;; |
| *-*-sco3.2v5* | *-*-sco5v6*) |
| # Causes problems with __ctype |
| ;; |
| *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) |
| # Compiler inserts libc in the correct place for threads to work |
| ;; |
| *) |
| # Add libc to deplibs on all other systems if necessary. |
| if test "$build_libtool_need_lc" = "yes"; then |
| deplibs="$deplibs -lc" |
| fi |
| ;; |
| esac |
| fi |
| |
| # Transform deplibs into only deplibs that can be linked in shared. |
| name_save=$name |
| libname_save=$libname |
| release_save=$release |
| versuffix_save=$versuffix |
| major_save=$major |
| # I'm not sure if I'm treating the release correctly. I think |
| # release should show up in the -l (ie -lgmp5) so we don't want to |
| # add it in twice. Is that correct? |
| release="" |
| versuffix="" |
| major="" |
| newdeplibs= |
| droppeddeps=no |
| case $deplibs_check_method in |
| pass_all) |
| # Don't check for shared/static. Everything works. |
| # This might be a little naive. We might want to check |
| # whether the library exists or not. But this is on |
| # osf3 & osf4 and I'm not really sure... Just |
| # implementing what was already the behavior. |
| newdeplibs=$deplibs |
| ;; |
| test_compile) |
| # This code stresses the "libraries are programs" paradigm to its |
| # limits. Maybe even breaks it. We compile a program, linking it |
| # against the deplibs as a proxy for the library. Then we can check |
| # whether they linked in statically or dynamically with ldd. |
| $rm conftest.c |
| cat > conftest.c <<EOF |
| int main() { return 0; } |
| EOF |
| $rm conftest |
| $LTCC $LTCFLAGS -o conftest conftest.c $deplibs |
| if test "$?" -eq 0 ; then |
| ldd_output=`ldd conftest` |
| for i in $deplibs; do |
| name=`expr $i : '-l\(.*\)'` |
| # If $name is empty we are operating on a -L argument. |
| if test "$name" != "" && test "$name" -ne "0"; then |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| case " $predeps $postdeps " in |
| *" $i "*) |
| newdeplibs="$newdeplibs $i" |
| i="" |
| ;; |
| esac |
| fi |
| if test -n "$i" ; then |
| libname=`eval \\$echo \"$libname_spec\"` |
| deplib_matches=`eval \\$echo \"$library_names_spec\"` |
| set dummy $deplib_matches |
| deplib_match=$2 |
| if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then |
| newdeplibs="$newdeplibs $i" |
| else |
| droppeddeps=yes |
| $echo |
| $echo "*** Warning: dynamic linker does not accept needed library $i." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which I believe you do not have" |
| $echo "*** because a test_compile did reveal that the linker did not use it for" |
| $echo "*** its dynamic dependency list that programs get resolved with at runtime." |
| fi |
| fi |
| else |
| newdeplibs="$newdeplibs $i" |
| fi |
| done |
| else |
| # Error occurred in the first compile. Let's try to salvage |
| # the situation: Compile a separate program for each library. |
| for i in $deplibs; do |
| name=`expr $i : '-l\(.*\)'` |
| # If $name is empty we are operating on a -L argument. |
| if test "$name" != "" && test "$name" != "0"; then |
| $rm conftest |
| $LTCC $LTCFLAGS -o conftest conftest.c $i |
| # Did it work? |
| if test "$?" -eq 0 ; then |
| ldd_output=`ldd conftest` |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| case " $predeps $postdeps " in |
| *" $i "*) |
| newdeplibs="$newdeplibs $i" |
| i="" |
| ;; |
| esac |
| fi |
| if test -n "$i" ; then |
| libname=`eval \\$echo \"$libname_spec\"` |
| deplib_matches=`eval \\$echo \"$library_names_spec\"` |
| set dummy $deplib_matches |
| deplib_match=$2 |
| if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then |
| newdeplibs="$newdeplibs $i" |
| else |
| droppeddeps=yes |
| $echo |
| $echo "*** Warning: dynamic linker does not accept needed library $i." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which you do not appear to have" |
| $echo "*** because a test_compile did reveal that the linker did not use this one" |
| $echo "*** as a dynamic dependency that programs can get resolved with at runtime." |
| fi |
| fi |
| else |
| droppeddeps=yes |
| $echo |
| $echo "*** Warning! Library $i is needed by this library but I was not able to" |
| $echo "*** make it link in! You will probably need to install it or some" |
| $echo "*** library that it depends on before this library will be fully" |
| $echo "*** functional. Installing it before continuing would be even better." |
| fi |
| else |
| newdeplibs="$newdeplibs $i" |
| fi |
| done |
| fi |
| ;; |
| file_magic*) |
| set dummy $deplibs_check_method |
| file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` |
| for a_deplib in $deplibs; do |
| name=`expr $a_deplib : '-l\(.*\)'` |
| # If $name is empty we are operating on a -L argument. |
| if test "$name" != "" && test "$name" != "0"; then |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| case " $predeps $postdeps " in |
| *" $a_deplib "*) |
| newdeplibs="$newdeplibs $a_deplib" |
| a_deplib="" |
| ;; |
| esac |
| fi |
| if test -n "$a_deplib" ; then |
| libname=`eval \\$echo \"$libname_spec\"` |
| for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do |
| potential_libs=`ls $i/$libname[.-]* 2>/dev/null` |
| for potent_lib in $potential_libs; do |
| # Follow soft links. |
| if ls -lLd "$potent_lib" 2>/dev/null \ |
| | grep " -> " >/dev/null; then |
| continue |
| fi |
| # The statement above tries to avoid entering an |
| # endless loop below, in case of cyclic links. |
| # We might still enter an endless loop, since a link |
| # loop can be closed while we follow links, |
| # but so what? |
| potlib="$potent_lib" |
| while test -h "$potlib" 2>/dev/null; do |
| potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` |
| case $potliblink in |
| [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; |
| *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; |
| esac |
| done |
| if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ |
| | ${SED} 10q \ |
| | $EGREP "$file_magic_regex" > /dev/null; then |
| newdeplibs="$newdeplibs $a_deplib" |
| a_deplib="" |
| break 2 |
| fi |
| done |
| done |
| fi |
| if test -n "$a_deplib" ; then |
| droppeddeps=yes |
| $echo |
| $echo "*** Warning: linker path does not have real file for library $a_deplib." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which you do not appear to have" |
| $echo "*** because I did check the linker path looking for a file starting" |
| if test -z "$potlib" ; then |
| $echo "*** with $libname but no candidates were found. (...for file magic test)" |
| else |
| $echo "*** with $libname and none of the candidates passed a file format test" |
| $echo "*** using a file magic. Last file checked: $potlib" |
| fi |
| fi |
| else |
| # Add a -L argument. |
| newdeplibs="$newdeplibs $a_deplib" |
| fi |
| done # Gone through all deplibs. |
| ;; |
| match_pattern*) |
| set dummy $deplibs_check_method |
| match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` |
| for a_deplib in $deplibs; do |
| name=`expr $a_deplib : '-l\(.*\)'` |
| # If $name is empty we are operating on a -L argument. |
| if test -n "$name" && test "$name" != "0"; then |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| case " $predeps $postdeps " in |
| *" $a_deplib "*) |
| newdeplibs="$newdeplibs $a_deplib" |
| a_deplib="" |
| ;; |
| esac |
| fi |
| if test -n "$a_deplib" ; then |
| libname=`eval \\$echo \"$libname_spec\"` |
| for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do |
| potential_libs=`ls $i/$libname[.-]* 2>/dev/null` |
| for potent_lib in $potential_libs; do |
| potlib="$potent_lib" # see symlink-check above in file_magic test |
| if eval $echo \"$potent_lib\" 2>/dev/null \ |
| | ${SED} 10q \ |
| | $EGREP "$match_pattern_regex" > /dev/null; then |
| newdeplibs="$newdeplibs $a_deplib" |
| a_deplib="" |
| break 2 |
| fi |
| done |
| done |
| fi |
| if test -n "$a_deplib" ; then |
| droppeddeps=yes |
| $echo |
| $echo "*** Warning: linker path does not have real file for library $a_deplib." |
| $echo "*** I have the capability to make that library automatically link in when" |
| $echo "*** you link to this library. But I can only do this if you have a" |
| $echo "*** shared version of the library, which you do not appear to have" |
| $echo "*** because I did check the linker path looking for a file starting" |
| if test -z "$potlib" ; then |
| $echo "*** with $libname but no candidates were found. (...for regex pattern test)" |
| else |
| $echo "*** with $libname and none of the candidates passed a file format test" |
| $echo "*** using a regex pattern. Last file checked: $potlib" |
| fi |
| fi |
| else |
| # Add a -L argument. |
| newdeplibs="$newdeplibs $a_deplib" |
| fi |
| done # Gone through all deplibs. |
| ;; |
| none | unknown | *) |
| newdeplibs="" |
| tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ |
| -e 's/ -[LR][^ ]*//g'` |
| if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| for i in $predeps $postdeps ; do |
| # can't use Xsed below, because $i might contain '/' |
| tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` |
| done |
| fi |
| if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ |
| | grep . >/dev/null; then |
| $echo |
| if test "X$deplibs_check_method" = "Xnone"; then |
| $echo "*** Warning: inter-library dependencies are not supported in this platform." |
| else |
| $echo "*** Warning: inter-library dependencies are not known to be supported." |
| fi |
| $echo "*** All declared inter-library dependencies are being dropped." |
| droppeddeps=yes |
| fi |
| ;; |
| esac |
| versuffix=$versuffix_save |
| major=$major_save |
| release=$release_save |
| libname=$libname_save |
| name=$name_save |
| |
| case $host in |
| *-*-rhapsody* | *-*-darwin1.[012]) |
| # On Rhapsody replace the C library is the System framework |
| newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` |
| ;; |
| esac |
| |
| if test "$droppeddeps" = yes; then |
| if test "$module" = yes; then |
| $echo |
| $echo "*** Warning: libtool could not satisfy all declared inter-library" |
| $echo "*** dependencies of module $libname. Therefore, libtool will create" |
| $echo "*** a static module, that should work as long as the dlopening" |
| $echo "*** application is linked with the -dlopen flag." |
| if test -z "$global_symbol_pipe"; then |
| $echo |
| $echo "*** However, this would only work if libtool was able to extract symbol" |
| $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" |
| $echo "*** not find such a program. So, this module is probably useless." |
| $echo "*** \`nm' from GNU binutils and a full rebuild may help." |
| fi |
| if test "$build_old_libs" = no; then |
| oldlibs="$output_objdir/$libname.$libext" |
| build_libtool_libs=module |
| build_old_libs=yes |
| else |
| build_libtool_libs=no |
| fi |
| else |
| $echo "*** The inter-library dependencies that have been dropped here will be" |
| $echo "*** automatically added whenever a program is linked with this library" |
| $echo "*** or is declared to -dlopen it." |
| |
| if test "$allow_undefined" = no; then |
| $echo |
| $echo "*** Since this library must not contain undefined symbols," |
| $echo "*** because either the platform does not support them or" |
| $echo "*** it was explicitly requested with -no-undefined," |
| $echo "*** libtool will only create a static version of it." |
| if test "$build_old_libs" = no; then |
| oldlibs="$output_objdir/$libname.$libext" |
| build_libtool_libs=module |
| build_old_libs=yes |
| else |
| build_libtool_libs=no |
| fi |
| fi |
| fi |
| fi |
| # Done checking deplibs! |
| deplibs=$newdeplibs |
| fi |
| |
| |
| # move library search paths that coincide with paths to not yet |
| # installed libraries to the beginning of the library search list |
| new_libs= |
| for path in $notinst_path; do |
| case " $new_libs " in |
| *" -L$path/$objdir "*) ;; |
| *) |
| case " $deplibs " in |
| *" -L$path/$objdir "*) |
| new_libs="$new_libs -L$path/$objdir" ;; |
| esac |
| ;; |
| esac |
| done |
| for deplib in $deplibs; do |
| case $deplib in |
| -L*) |
| case " $new_libs " in |
| *" $deplib "*) ;; |
| *) new_libs="$new_libs $deplib" ;; |
| esac |
| ;; |
| *) new_libs="$new_libs $deplib" ;; |
| esac |
| done |
| deplibs="$new_libs" |
| |
| |
| # All the library-specific variables (install_libdir is set above). |
| library_names= |
| old_library= |
| dlname= |
| |
| # Test again, we may have decided not to build it any more |
| if test "$build_libtool_libs" = yes; then |
| if test "$hardcode_into_libs" = yes; then |
| # Hardcode the library paths |
| hardcode_libdirs= |
| dep_rpath= |
| rpath="$finalize_rpath" |
| test "$mode" != relink && rpath="$compile_rpath$rpath" |
| for libdir in $rpath; do |
| if test -n "$hardcode_libdir_flag_spec"; then |
| if test -n "$hardcode_libdir_separator"; then |
| if test -z "$hardcode_libdirs"; then |
| hardcode_libdirs="$libdir" |
| else |
| # Just accumulate the unique libdirs. |
| case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in |
| *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) |
| ;; |
| *) |
| hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" |
| ;; |
| esac |
| fi |
| else |
| eval flag=\"$hardcode_libdir_flag_spec\" |
| dep_rpath="$dep_rpath $flag" |
| fi |
| elif test -n "$runpath_var"; then |
| case "$perm_rpath " in |
| *" $libdir "*) ;; |
| *) perm_rpath="$perm_rpath $libdir" ;; |
| esac |
| fi |
| done |
| # Substitute the hardcoded libdirs into the rpath. |
| if test -n "$hardcode_libdir_separator" && |
| test -n "$hardcode_libdirs"; then |
| libdir="$hardcode_libdirs" |
| if test -n "$hardcode_libdir_flag_spec_ld"; then |
| eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" |
| else |
| eval dep_rpath=\"$hardcode_libdir_flag_spec\" |
| fi |
| fi |
| if test -n "$runpath_var" && test -n "$perm_rpath"; then |
| # We should set the runpath_var. |
| rpath= |
| for dir in $perm_rpath; do |
| rpath="$rpath$dir:" |
| done |
| eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" |
| fi |
| test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" |
| fi |
| |
| shlibpath="$finalize_shlibpath" |
| test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" |
| if test -n "$shlibpath"; then |
| eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" |
| fi |
| |
| # Get the real and link names of the library. |
| eval shared_ext=\"$shrext_cmds\" |
| eval library_names=\"$library_names_spec\" |
| set dummy $library_names |
| realname="$2" |
| shift; shift |
| |
| if test -n "$soname_spec"; then |
| eval soname=\"$soname_spec\" |
| else |
| soname="$realname" |
| fi |
| if test -z "$dlname"; then |
| dlname=$soname |
| fi |
| |
| lib="$output_objdir/$realname" |
| linknames= |
| for link |
| do |
| linknames="$linknames $link" |
| done |
| |
| # Use standard objects if they are pic |
| test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` |
| |
| # Prepare the list of exported symbols |
| if test -z "$export_symbols"; then |
| if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then |
| $show "generating symbol list for \`$libname.la'" |
| export_symbols="$output_objdir/$libname.exp" |
| $run $rm $export_symbols |
| cmds=$export_symbols_cmds |
| save_ifs="$IFS"; IFS='~' |
| for cmd in $cmds; do |
| IFS="$save_ifs" |
| eval cmd=\"$cmd\" |
| if len=`expr "X$cmd" : ".*"` && |
| test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then |
| $show "$cmd" |
| $run eval "$cmd" || exit $? |
| skipped_export=false |
| else |
| # The command line is too long to execute in one step. |
| $show "using reloadable object file for export list..." |
| skipped_export=: |
| # Break out early, otherwise skipped_export may be |
| # set to false by a later but shorter cmd. |
| break |
| fi |
| done |
| IFS="$save_ifs" |
| if test -n "$export_symbols_regex"; then |
| $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" |
| $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' |
| $show "$mv \"${export_symbols}T\" \"$export_symbols\"" |
| $run eval '$mv "${export_symbols}T" "$export_symbols"' |
| fi |
| fi |
| fi |
| |
| if test -n "$export_symbols" && test -n "$include_expsyms"; then |
| $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' |
| fi |
| |
| tmp_deplibs= |
| for test_deplib in $deplibs; do |
| case " $convenience " in |
| *" $test_deplib "*) ;; |
| *) |
| tmp_deplibs="$tmp_deplibs $test_deplib" |
| ;; |
| esac |
| done |
| deplibs="$tmp_deplibs" |
| |
| if test -n "$convenience"; then |
| if test -n "$whole_archive_flag_spec"; then |
| save_libobjs=$libobjs |
| eval libobjs=\"\$libobjs $whole_archive_flag_spec\" |
| else |
| gentop="$output_objdir/${outputname}x" |
| generated="$generated $gentop" |
| |
| func_extract_archives $gentop $convenience |
| libobjs="$libobjs $func_extract_archives_result" |
| fi |
| fi |
| |
| if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then |
| eval flag=\"$thread_safe_flag_spec\" |
| linker_flags="$linker_flags $flag" |
| fi |
| |
| # Make a backup of the uninstalled library when relinking |
| if test "$mode" = relink; then |
| $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? |
| fi |
| |
| # Do each of the archive commands. |
| if test "$module" = yes && test -n "$module_cmds" ; then |
| if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then |
| eval test_cmds=\"$module_expsym_cmds\" |
| cmds=$module_expsym_cmds |
| else |
| eval test_cmds=\"$module_cmds\" |
| cmds=$module_cmds |
| fi |
| else |
| if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then |
| eval test_cmds=\"$archive_expsym_cmds\" |
| cmds=$archive_expsym_cmds |
| else |
| eval test_cmds=\"$archive_cmds\" |
| cmds=$archive_cmds |
| fi |
| fi |
| |
| if test "X$skipped_export" != "X:" && |
| len=`expr "X$test_cmds" : ".*" 2>/dev/null` && |
| test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then |
| : |
| else |
| # The command line is too long to link in one step, link piecewise. |
| $echo "creating reloadable object files..." |
| |
| # Save the value of $output and $libobjs because we want to |
| # use them later. If we have whole_archive_flag_spec, we |
| # want to use save_libobjs as it was before |
| # whole_archive_flag_spec was expanded, because we can't |
| # assume the linker understands whole_archive_flag_spec. |
| # This may have to be revisited, in case too many |
| # convenience libraries get linked in and end up exceeding |
| # the spec. |
| if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then |
| save_libobjs=$libobjs |
| fi |
| save_output=$output |
| output_la=`$echo "X$output" | $Xsed -e "$basename"` |
| |
| # Clear the reloadable object creation command queue and |
| # initialize k to one. |
| test_cmds= |
| concat_cmds= |
| objlist= |
| delfiles= |
| last_robj= |
| k=1 |
| output=$output_objdir/$output_la-${k}.$objext |
| # Loop over the list of objects to be linked. |
| for obj in $save_libobjs |
| do |
| eval test_cmds=\"$reload_cmds $objlist $last_robj\" |
| if test "X$objlist" = X || |
| { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && |
| test "$len" -le "$max_cmd_len"; }; then |
| objlist="$objlist $obj" |
| else |
| # The command $test_cmds is almost too long, add a |
| # command to the queue. |
| if test "$k" -eq 1 ; then |
| # The first file doesn't have a previous command to add. |
| eval concat_cmds=\"$reload_cmds $objlist $last_robj\" |
| else |
| # All subsequent reloadable object files will link in |
| # the last one created. |
| eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" |
| fi |
| last_robj=$output_objdir/$output_la-${k}.$objext |
| k=`expr $k + 1` |
| output=$output_objdir/$output_la-${k}.$objext |
| objlist=$obj |
| len=1 |
| fi |
| done |
| # Handle the remaining objects by creating one last |
| # reloadable object file. All subsequent reloadable object |
| # files will link in the last one created. |
| test -z "$concat_cmds" || concat_cmds=$concat_cmds~ |
| eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" |
| |
| if ${skipped_export-false}; then |
| $show "generating symbol list for \`$libname.la'" |
| export_symbols="$output_objdir/$libname.exp" |
| $run $rm $export_symbols |
| libobjs=$output |
| # Append the command to create the export file. |
| eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" |
| fi |
| |
| # Set up a command to remove the reloadable object files |
| # after they are used. |
| i=0 |
| while test "$i" -lt "$k" |
| do |
| i=`expr $i + 1` |
| delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" |
| done |
| |
| $echo "creating a temporary reloadable object file: $output" |
| |
| # Loop through the commands generated above and execute them. |
| save_ifs="$IFS"; IFS='~' |
| for cmd in $concat_cmds; do |
| IFS="$save_ifs" |
| $show "$cmd" |
| $run eval "$cmd" || exit $? |
| done |
| IFS="$save_ifs" |
| |
| libobjs=$output |
| # Restore the value of output. |
| output=$save_output |
| |
| if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then |
| eval libobjs=\"\$libobjs $whole_archive_flag_spec\" |
| fi |
| # Expand the library linking commands again to reset the |
| # value of $libobjs for piecewise linking. |
| |
| # Do each of the archive commands. |
| if test "$module" = yes && test -n "$module_cmds" ; then |
| if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then |
| cmds=$module_expsym_cmds |
| else |
| cmds=$module_cmds |
| fi |
| else |
| if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then |
| cmds=$archive_expsym_cmds |
| else |
| cmds=$archive_cmds |
| fi |
| fi |
| |
| # Append the command to remove the reloadable object files |
| # to the just-reset $cmds. |
| eval cmds=\"\$cmds~\$rm $delfiles\" |
| fi |
| save_ifs="$IFS"; IFS='~' |
| for cmd in $cmds; do |
| IFS="$save_ifs" |
| eval cmd=\"$cmd\" |
| $show "$cmd" |
| $run eval "$cmd" || { |
| lt_exit=$? |
| |
| # Restore the uninstalled library and exit |
| if test "$mode" = relink; then |
| $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' |
| fi |
| |
| exit $lt_exit |
| } |
| done |
| IFS="$save_ifs" |
| |
| # Restore the uninstalled library and exit |
| if test "$mode" = relink; then |
| $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? |
| |
| if test -n "$convenience"; then |
| if test -z "$whole_archive_flag_spec"; then |
| $show "${rm}r $gentop" |
| $run ${rm}r "$gentop" |
| fi |
| fi |
| |
| exit $EXIT_SUCCESS |
| fi |
| |
| # Create links to the real library. |
| for linkname in $linknames; do |
| if test "$realname" != "$linkname"; then |
| $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" |
| $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? |
| fi |
| done |
| |
| # If -module or -export-dynamic was specified, set the dlname. |
| if test "$module" = yes || test "$export_dynamic" = yes; then |
| # On all known operating systems, these are identical. |
| dlname="$soname" |
| fi |
| fi |
| ;; |
| |
| obj) |
| if test -n "$deplibs"; then |
| $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 |
| fi |
| |
| if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then |
| $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 |
| fi |
| |
| if test -n "$rpath"; then |
| $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 |
| fi |
| |
| if test -n "$xrpath"; then |
| $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 |
| fi |
| |
| if test -n "$vinfo"; then |
| $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 |
| fi |
| |
| if test -n "$release"; then |
| $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 |
| fi |
| |
| case $output in |
| *.lo) |
| if test -n "$objs$old_deplibs"; then |
| $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 |
| exit $EXIT_FAILURE |
| fi |
| libobj="$output" |
| obj=`$echo "X$output" | $Xsed -e "$lo2o"` |
| ;; |
| *) |
| libobj= |
| obj="$output" |
| ;; |
| esac |
| |
| # Delete the old objects. |
| $run $rm $obj $libobj |
| |
| # Objects from convenience libraries. This assumes |
| # single-version convenience libraries. Whenever we create |
| # different ones for PIC/non-PIC, this we'll have to duplicate |
| # the extraction. |
| reload_conv_objs= |
| gentop= |
| # reload_cmds runs $LD directly, so let us get rid of |
| # -Wl from whole_archive_flag_spec |
| wl= |
| |
| if test -n "$convenience"; then |
| if test -n "$whole_archive_flag_spec"; then |
| eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" |
| else |
| gentop="$output_objdir/${obj}x" |
| generated="$generated $gentop" |
| |
| func_extract_archives $gentop $convenience |
| reload_conv_objs="$reload_objs $func_extract_archives_result" |
| fi |
| fi |
| |
| # Create the old-style object. |
| reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test |
| |
| output="$obj" |
| cmds=$reload_cmds |
| save_ifs="$IFS"; IFS='~' |
| for cmd in $cmds; do |
| IFS="$save_ifs" |
| eval cmd=\"$cmd\" |
| $show "$cmd" |
| $run eval "$cmd" || exit $? |
| done |
| IFS="$save_ifs" |
| |
| # Exit if we aren't doing a library object file. |
| if test -z "$libobj"; then |
| if test -n "$gentop"; then |
| $show "${rm}r $gentop" |
| $run ${rm}r $gentop |
| fi |
| |
| exit $EXIT_SUCCESS |
| fi |
| |
| if test "$build_libtool_libs" != yes; then |
| if test -n "$gentop"; then |
| $show "${rm}r $gentop" |
| $run ${rm}r $gentop |
| fi |
| |
| # Create an invalid libtool object if no PIC, so that we don't |
| # accidentally link it into a program. |
| # $show "echo timestamp > $libobj" |
| # $run eval "echo timestamp > $libobj" || exit $? |
| exit $EXIT_SUCCESS |
| fi |
| |
| if test -n "$pic_flag" || test "$pic_mode" != default; then |
| # Only
|