#ifndef __BACKPORT_SKBUFF_H
#define __BACKPORT_SKBUFF_H
#include_next <linux/skbuff.h>
#include <linux/version.h>
#include <generated/utsrelease.h>

#if LINUX_VERSION_IS_LESS(3,4,0) && \
      (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,4)) && \
      !(defined(CONFIG_SUSE_KERNEL) && LINUX_VERSION_IS_GEQ(3,0,0))
#define skb_add_rx_frag(skb, i, page, off, size, truesize) \
	skb_add_rx_frag(skb, i, page, off, size)
#endif

#if LINUX_VERSION_IS_LESS(3,3,0)
#define __pskb_copy LINUX_BACKPORT(__pskb_copy)
extern struct sk_buff *__pskb_copy(struct sk_buff *skb,
				   int headroom, gfp_t gfp_mask);

#define skb_complete_wifi_ack LINUX_BACKPORT(skb_complete_wifi_ack)
static inline void skb_complete_wifi_ack(struct sk_buff *skb, bool acked)
{
	WARN_ON(1);
}

/* define to 0 so checks for it are always false */
#define SKBTX_WIFI_STATUS 0
#elif LINUX_VERSION_IS_LESS(3,18,0)
#define skb_complete_wifi_ack LINUX_BACKPORT(skb_complete_wifi_ack)
void skb_complete_wifi_ack(struct sk_buff *skb, bool acked);
#endif

#if LINUX_VERSION_IS_LESS(3,2,0)
#include <linux/dma-mapping.h>

/* mask skb_frag_page as RHEL6 backports this */
#define skb_frag_page LINUX_BACKPORT(skb_frag_page)
static inline struct page *skb_frag_page(const skb_frag_t *frag)
{
	return frag->page;
}

#define skb_frag_size LINUX_BACKPORT(skb_frag_size)
static inline unsigned int skb_frag_size(const skb_frag_t *frag)
{
	return frag->size;
}

/* mask skb_frag_dma_map as RHEL6 backports this */
#define skb_frag_dma_map LINUX_BACKPORT(skb_frag_dma_map)
static inline dma_addr_t skb_frag_dma_map(struct device *dev,
					  const skb_frag_t *frag,
					  size_t offset, size_t size,
					  enum dma_data_direction dir)
{
	return dma_map_page(dev, skb_frag_page(frag),
			    frag->page_offset + offset, size, dir);
}
#endif

#if LINUX_VERSION_IS_LESS(3,1,0)
/* mask __netdev_alloc_skb_ip_align as RHEL6 backports this */
#define __netdev_alloc_skb_ip_align(a,b,c) compat__netdev_alloc_skb_ip_align(a,b,c)
static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
							  unsigned int length, gfp_t gfp)
{
	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);

	if (NET_IP_ALIGN && skb)
		skb_reserve(skb, NET_IP_ALIGN);
	return skb;
}
#endif

#ifndef skb_walk_frags
#define skb_walk_frags(skb, iter)	\
	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
#endif

#if LINUX_VERSION_IS_LESS(3,2,0)
#define skb_frag_size_sub LINUX_BACKPORT(skb_frag_size_sub)
static inline void skb_frag_size_sub(skb_frag_t *frag, int delta)
{
	frag->size -= delta;
}

/**
 * skb_frag_address - gets the address of the data contained in a paged fragment
 * @frag: the paged fragment buffer
 *
 * Returns the address of the data within @frag. The page must already
 * be mapped.
 */
#define skb_frag_address LINUX_BACKPORT(skb_frag_address)
static inline void *skb_frag_address(const skb_frag_t *frag)
{
	return page_address(skb_frag_page(frag)) + frag->page_offset;
}
#endif /* LINUX_VERSION_IS_LESS(3,2,0) */

#if LINUX_VERSION_IS_LESS(3,9,0)
#ifndef NETDEV_FRAG_PAGE_MAX_ORDER
#define NETDEV_FRAG_PAGE_MAX_ORDER get_order(32768)
#endif
#ifndef NETDEV_FRAG_PAGE_MAX_SIZE
#define NETDEV_FRAG_PAGE_MAX_SIZE  (PAGE_SIZE << NETDEV_FRAG_PAGE_MAX_ORDER)
#endif
#endif /* LINUX_VERSION_IS_LESS(3,9,0) */

#if LINUX_VERSION_IS_LESS(3,9,0)
#define skb_unclone LINUX_BACKPORT(skb_unclone)
static inline int skb_unclone(struct sk_buff *skb, gfp_t pri)
{
	might_sleep_if(pri & __GFP_WAIT);
	if (skb_cloned(skb))
		return pskb_expand_head(skb, 0, 0, pri);
       return 0;
}
#endif

#if LINUX_VERSION_IS_LESS(3,2,0)

#define skb_frag_address_safe LINUX_BACKPORT(skb_frag_address_safe)
/**
 * skb_frag_address_safe - gets the address of the data contained in a paged fragment
 * @frag: the paged fragment buffer
 *
 * Returns the address of the data within @frag. Checks that the page
 * is mapped and returns %NULL otherwise.
 */
static inline void *skb_frag_address_safe(const skb_frag_t *frag)
{
	void *ptr = page_address(skb_frag_page(frag));
	if (unlikely(!ptr))
		return NULL;

	return ptr + frag->page_offset;
}
#endif /* LINUX_VERSION_IS_LESS(3,2,0) */

#if LINUX_VERSION_IS_LESS(3,14,0) && \
    RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0) && \
    !(LINUX_VERSION_CODE == KERNEL_VERSION(3,13,11) && UTS_UBUNTU_RELEASE_ABI > 30)
/*
 * Packet hash types specify the type of hash in skb_set_hash.
 *
 * Hash types refer to the protocol layer addresses which are used to
 * construct a packet's hash. The hashes are used to differentiate or identify
 * flows of the protocol layer for the hash type. Hash types are either
 * layer-2 (L2), layer-3 (L3), or layer-4 (L4).
 *
 * Properties of hashes:
 *
 * 1) Two packets in different flows have different hash values
 * 2) Two packets in the same flow should have the same hash value
 *
 * A hash at a higher layer is considered to be more specific. A driver should
 * set the most specific hash possible.
 *
 * A driver cannot indicate a more specific hash than the layer at which a hash
 * was computed. For instance an L3 hash cannot be set as an L4 hash.
 *
 * A driver may indicate a hash level which is less specific than the
 * actual layer the hash was computed on. For instance, a hash computed
 * at L4 may be considered an L3 hash. This should only be done if the
 * driver can't unambiguously determine that the HW computed the hash at
 * the higher layer. Note that the "should" in the second property above
 * permits this.
 */
enum pkt_hash_types {
	PKT_HASH_TYPE_NONE,	/* Undefined type */
	PKT_HASH_TYPE_L2,	/* Input: src_MAC, dest_MAC */
	PKT_HASH_TYPE_L3,	/* Input: src_IP, dst_IP */
	PKT_HASH_TYPE_L4,	/* Input: src_IP, dst_IP, src_port, dst_port */
};

static inline void
skb_set_hash(struct sk_buff *skb, __u32 hash, enum pkt_hash_types type)
{
#if LINUX_VERSION_IS_GEQ(3,2,0) /* 4031ae6edb */
	skb->l4_rxhash = (type == PKT_HASH_TYPE_L4);
#endif
#if LINUX_VERSION_IS_GEQ(3,4,0) /* bdeab99191 */
	skb->rxhash = hash;
#endif
}
#endif /* LINUX_VERSION_IS_LESS(3,14,0) */

#if LINUX_VERSION_IS_LESS(3,16,0)
#define __pskb_copy_fclone LINUX_BACKPORT(__pskb_copy_fclone)
static inline struct sk_buff *__pskb_copy_fclone(struct sk_buff *skb,
						 int headroom, gfp_t gfp_mask,
						 bool fclone)
{
	return __pskb_copy(skb, headroom, gfp_mask);
}
#endif

#if LINUX_VERSION_IS_LESS(3,18,0)
#define skb_clone_sk LINUX_BACKPORT(skb_clone_sk)
struct sk_buff *skb_clone_sk(struct sk_buff *skb);
#endif

#if LINUX_VERSION_IS_LESS(3,19,0)
/**
 * __dev_alloc_pages - allocate page for network Rx
 * @gfp_mask: allocation priority. Set __GFP_NOMEMALLOC if not for network Rx
 * @order: size of the allocation
 *
 * Allocate a new page.
 *
 * %NULL is returned if there is no free memory.
*/
#define __dev_alloc_pages LINUX_BACKPORT(__dev_alloc_pages)
static inline struct page *__dev_alloc_pages(gfp_t gfp_mask,
					     unsigned int order)
{
	/* This piece of code contains several assumptions.
	 * 1.  This is for device Rx, therefor a cold page is preferred.
	 * 2.  The expectation is the user wants a compound page.
	 * 3.  If requesting a order 0 page it will not be compound
	 *     due to the check to see if order has a value in prep_new_page
	 * 4.  __GFP_MEMALLOC is ignored if __GFP_NOMEMALLOC is set due to
	 *     code in gfp_to_alloc_flags that should be enforcing this.
	 */
	gfp_mask |= __GFP_COLD | __GFP_COMP;
#if LINUX_VERSION_IS_GEQ(3,6,0)
	gfp_mask |= __GFP_MEMALLOC;
#endif

	return alloc_pages_node(NUMA_NO_NODE, gfp_mask, order);
}

#define dev_alloc_pages LINUX_BACKPORT(dev_alloc_pages)
static inline struct page *dev_alloc_pages(unsigned int order)
{
	return __dev_alloc_pages(GFP_ATOMIC, order);
}

/**
 * __dev_alloc_page - allocate a page for network Rx
 * @gfp_mask: allocation priority. Set __GFP_NOMEMALLOC if not for network Rx
 *
 * Allocate a new page.
 *
 * %NULL is returned if there is no free memory.
 */
#define __dev_alloc_page LINUX_BACKPORT(__dev_alloc_page)
static inline struct page *__dev_alloc_page(gfp_t gfp_mask)
{
	return __dev_alloc_pages(gfp_mask, 0);
}

#define dev_alloc_page LINUX_BACKPORT(dev_alloc_page)
static inline struct page *dev_alloc_page(void)
{
	return __dev_alloc_page(GFP_ATOMIC);
}
#endif /* LINUX_VERSION_IS_LESS(3,19,0) */

#if LINUX_VERSION_IS_LESS(3,19,0)
#define skb_copy_datagram_msg LINUX_BACKPORT(skb_copy_datagram_msg)
static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset,
					struct msghdr *msg, int size)
{
	return skb_copy_datagram_iovec(from, offset, msg->msg_iov, size);
}

#define memcpy_from_msg LINUX_BACKPORT(memcpy_from_msg)
static inline int memcpy_from_msg(void *data, struct msghdr *msg, int len)
{
	return memcpy_fromiovec(data, msg->msg_iov, len);
}

/**
 *	skb_put_padto - increase size and pad an skbuff up to a minimal size
 *	@skb: buffer to pad
 *	@len: minimal length
 *
 *	Pads up a buffer to ensure the trailing bytes exist and are
 *	blanked. If the buffer already contains sufficient data it
 *	is untouched. Otherwise it is extended. Returns zero on
 *	success. The skb is freed on error.
 */
#define skb_put_padto LINUX_BACKPORT(skb_put_padto)
static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
{
	unsigned int size = skb->len;

	if (unlikely(size < len)) {
		len -= size;
		if (skb_pad(skb, len))
			return -ENOMEM;
		__skb_put(skb, len);
	}
	return 0;
}

#define skb_ensure_writable LINUX_BACKPORT(skb_ensure_writable)
int skb_ensure_writable(struct sk_buff *skb, int write_len);

#endif /* LINUX_VERSION_IS_LESS(3,19,0) */

#if LINUX_VERSION_IS_LESS(4,2,0)
static inline void skb_free_frag(void *data)
{
	put_page(virt_to_head_page(data));
}

/* iwlwifi doesn't need this function, so it's safe to just return 0 */
static inline
__u32 skb_get_hash_perturb(const struct sk_buff *skb, u32 perturb)
{
	return 0;
}

#endif

#endif /* __BACKPORT_SKBUFF_H */