
/****************************************************************************
 *  (c) Copyright 2007 Wi-Fi Alliance.  All Rights Reserved
 *
 *
 *  LICENSE
 *
 *  License is granted only to Wi-Fi Alliance members and designated
 *  contractors ($B!H(BAuthorized Licensees$B!I(B)..AN  Authorized Licensees are granted
 *  the non-exclusive, worldwide, limited right to use, copy, import, export
 *  and distribute this software:
 *  (i) solely for noncommercial applications and solely for testing Wi-Fi
 *  equipment; and
 *  (ii) solely for the purpose of embedding the software into Authorized
 *  Licensee$B!G(Bs proprietary equipment and software products for distribution to
 *  its customers under a license with at least the same restrictions as
 *  contained in this License, including, without limitation, the disclaimer of
 *  warranty and limitation of liability, below..AN  The distribution rights
 *  granted in clause
 *  (ii), above, include distribution to third party companies who will
 *  redistribute the Authorized Licensee$B!G(Bs product to their customers with or
 *  without such third party$B!G(Bs private label. Other than expressly granted
 *  herein, this License is not transferable or sublicensable, and it does not
 *  extend to and may not be used with non-Wi-Fi applications..AN  Wi-Fi Alliance
 *  reserves all rights not expressly granted herein..AN
 *.AN
 *  Except as specifically set forth above, commercial derivative works of
 *  this software or applications that use the Wi-Fi scripts generated by this
 *  software are NOT AUTHORIZED without specific prior written permission from
 *  Wi-Fi Alliance.
 *.AN
 *  Non-Commercial derivative works of this software for internal use are
 *  authorized and are limited by the same restrictions; provided, however,
 *  that the Authorized Licensee shall provide Wi-Fi Alliance with a copy of
 *  such derivative works under a perpetual, payment-free license to use,
 *  modify, and distribute such derivative works for purposes of testing Wi-Fi
 *  equipment.
 *.AN
 *  Neither the name of the author nor "Wi-Fi Alliance" may be used to endorse
 *  or promote products that are derived from or that use this software without
 *  specific prior written permission from Wi-Fi Alliance.
 *
 *  THIS SOFTWARE IS PROVIDED BY WI-FI ALLIANCE "AS IS" AND ANY EXPRESS OR
 *  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 *  OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A.AN PARTICULAR PURPOSE,
 *  ARE DISCLAIMED. IN NO EVENT SHALL WI-FI ALLIANCE BE LIABLE FOR ANY DIRECT,
 *  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 *  (INCLUDING, BUT NOT LIMITED TO, THE COST OF PROCUREMENT OF SUBSTITUTE
 *  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 *  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE) ARISING IN ANY WAY OUT OF
 *  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************
 */
/*
 *    File: wfa_tg.c
 *    Library functions for traffic generator.
 *    They are shared with both TC and DUT agent.
 *
 *    Revision History:
 *       2006/03/10 -- initially created by qhu
 *       2006/06/01 -- BETA release by qhu
 *       2006/06/13 -- 00.02 release by qhu
 *       2006/06/30 -- 00.10 Release by qhu
 *       2006/07/10 -- 01.00 Release by qhu
 *       2006/08/01 -- 01.03 fix ping result unreachable caused by random output
 *                           timing. Add 2 seconds wait-time.
 *                           change priority level to 40 max while traffic
 *                           sending/receiving and 60 min for normal state.
 *       2006/09/01 -- 01.05 Release by qhu
 *       2006/10/26 -- 01.06 released by qhu
 *       2006/10.20 -- bug fixes report by n. ojannen
 *       2006/12/30 -- bug fix. a potential race condition for transaction test, *                     reported by c.benson.
 *       2006/01/11 -- 01.10 released by qhu
 *       2007/02/15  -- WMM Extension Beta released by qhu, mkaroshi
 *       2007/03/15  -- develop a better rate control method for sendLong
 *                      a major bug fix for File receive that opens socket with
 *                      source port. It should be destination port. This was
 *                      an early mistake because of interpretation.
 *       2007/03/30 -- 01.40 WPA2 and Official WMM Beta Release by qhu
 *       2007/04/20 -- 02.00 WPA2 and Official WMM Release by qhu
 *       2007/08/15 --  02.10 WMM-Power Save release by qhu
 *       2007/10/10 -- 02.20 Voice SOHO beta -- qhu
 *       2007/11/07 -- 02.30 Voice HSO -- qhu
 *           -- revise the code for traffic throttled control
 *           -- take care of EAGAIN error return by socket sendto() -- suggested
 *              by tterhaar
 */
#ifndef WIN32
#include <sys/socket.h>
#include <arpa/inet.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
#include <sys/time.h>
#include <time.h>
#include <signal.h>
#include <fcntl.h>
#include <netdb.h>
#include <pthread.h>
#include <semaphore.h>
#else
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#endif /* !WIN32 */
#include "wfa_debug.h"
#include "wfa_ver.h"
#include "wfa_main.h"
#include "wfa_tlv.h"
#include "wfa_tg.h"
#include "wfa_cmds.h"
#include "wfa_sock.h"
#include "wfa_rsp.h"
#include "wfa_wmmps.h"
#include "wfa_types.h"
#include "wfa_miscs.h"


int usedThread = 0;
BYTE Send_dutResp[WFA_BUFF_512];
extern void wfaSentStatsResp(BYTE*);
#ifndef WIN32
tgWMM_t wmm_thr[WFA_THREADS_NUM];
extern sem_t sem_wmm;
extern sem_t sem_wmm_resp;
extern sem_t sem_gtgrecv;
extern sem_t sem_iptv_gtgrecv[WFA_MAX_TRAFFIC_STREAMS];
int gnumStreams;
pthread_t thrid[WFA_MAX_TRAFFIC_STREAMS];
#else
extern HANDLE thr_flag_cond;
DWORD   dwpingThread;
DWORD dwGenericThread;
HANDLE	pinghThread = NULL;
HANDLE hTimerThread = NULL;
HANDLE hThread1 = NULL;
HANDLE hThread2 = NULL;
HANDLE g_hRecvEvent = NULL;
HANDLE send_event = NULL;
extern HANDLE g_RecvhThread;
extern HANDLE g_IPTVRecvhThread[WFA_MAX_TRAFFIC_STREAMS];
HANDLE g_recvEvent[WFA_MAX_TRAFFIC_STREAMS];
DWORD dwGenericThread2;
DWORD dwGenericThread1;
DWORD dwIPTVThread;
HANDLE g_TGSndThr[WFA_MAX_TRAFFIC_STREAMS];
extern ULONG exitcode;
extern HANDLE processHandle;
extern void SendIPTVFile(LPVOID);
#endif /* !WIN32 */
extern tgStream_t *gStreams;
extern BOOL gtgRecv;
extern BOOL gtgSend;
extern BOOL gtgTransac;
extern int btSockfd;
extern int btRecvSockfd;
extern int gTcpRecvSockfd;
extern int gTCPsock;
extern int gtimeOut;
extern int gRegSec;
extern int isExit;
extern int adj_latency;

extern tgStream_t *findStreamProfile(int);
extern int wfaTrafficSendTo(int, char *, int, struct sockaddr *);
extern int wfaTrafficRecv(int, char *, struct sockaddr *);
extern unsigned short wfa_defined_debug;
extern int tgSockfds[];

extern int wfaTGSetPrio(int sockfd, int tgClass);
extern double min_rttime;
extern tgSyncTime_t gtgFinishSyncTime;
extern BOOL gtgStartSync;
extern BOOL gtgFinishSync;
extern tgE2EStats_t *e2eStats;
extern int e2eCnt;
extern void wfaRecvThrCreate(void);
extern void wfaIPTVRecvThrCreate(int);
extern void SendFile(void);
extern int IPTVprof;


extern tgSyncTime_t gtgStartSyncTime;
#ifdef WFA_WMM_EXT
extern tgWMM_t wmm_thr[];

#ifdef WFA_WMM_PS_EXT
extern int gtgWmmPS;
extern wfaWmmPS_t wmmps_info;
extern int psSockfd;
extern unsigned long psTxMsg[];
extern unsigned long psRxMsg[];
extern int gtgPsPktRecvd;

dutCmdResponse_t gGenericResp;

extern void wfaSetDUTPwrMgmt(int mode);
void wmmps_wait_state_proc();

#endif /* WFA_WMM_PS_EXT */

#endif /* WFA_WMM_EXT */

static int runLoop = 0;
extern volatile int gTransactrunLoop;
static int streamId = 0;
static int totalTranPkts = 0, sentTranPkts = 0;
static int slotCnt = 0;

int clock_drift_ps = 0;  // drift(usec) per second
char e2eResults[32];

extern dutCmdResponse_t gGenericResp;

#ifdef WIN32
unsigned int  Timerid;
extern DWORD Win32_tmout_stop_send(LPVOID num ) ;
extern DWORD PingStart();
char PingStr[WFA_BUFF_512];

#ifndef MAX_UDP_LEN
#define MAX_UDP_LEN	2048
#endif	/*MAX_UDP_LEN*/

#define HIGH_FRAME_RATE_VAL 500
#define SLEEP_DENOMINATOR 5
#endif	/*WIN32*/

/* Some devices may only support UDP ECHO and do not have ICMP level ping */
// #define WFA_PING_UDP_ECHO_ONLY     1

/*
 * Each packet will have the header in the data field
 */

void wfa_syncd_time(tgSyncTime_t *startTime, tgSyncTime_t *finishTime)
{
#ifdef WFA_WMM_EXT
#ifndef WIN32
	DPRINT_INFO(WFA_OUT, "finish tm time %f start tm time %f\n", finishTime->tm_time, startTime->tm_time);
	DPRINT_INFO(WFA_OUT, "finish dut time %f  startTime dut time %f \n", finishTime->dut_time, startTime->dut_time);

	if(startTime->dtime > finishTime->dtime)
		startTime->dtime = finishTime->dtime;

	DPRINT_INFO(WFA_OUT, "roundtrip delay time (usec): %i\n", (int) (1000000 * startTime->dtime));

	clock_drift_ps = 1000000*( (finishTime->tm_time - startTime->tm_time)-(finishTime->dut_time - startTime->dut_time) ) /
		(finishTime->dut_time - startTime->dut_time);

	DPRINT_INFO(WFA_OUT, "drift per second %i\n", clock_drift_ps);
#endif /* !WIN32 */
#endif /* !WFA_WMM_EXT */
}

#ifndef WIN32
/* this is to stop sending packets by timer       */
void tmout_stop_send(int num)
{
#ifdef WFA_WMM_EXT
	int i;
#endif /* WFA_WMM_EXT */
	DPRINT_INFO(WFA_OUT, "timer fired, stop sending traffic\n");

	/*
	*  After runLoop reset, all sendLong will stop
	*/
	runLoop = 0;
	gTransactrunLoop = 0;

#ifdef WFA_WMM_EXT
	/*
	* once usedThread is reset, WMM tests using multithread is ended
	* the threads will be reused for the next test.
	*/
	usedThread--;
	//if(usedThread == 0)
		sem_post(&sem_wmm_resp);
#endif /* WFA_WMM_EXT */

	/*
	* once the stream table slot count is reset, it implies that the test
	* is done. When the next set profile command comes in, it will reset/clean
	* the stream table.
	*/
	slotCnt = 0;

	/*
	* The test is for DT3 transaction test.
	* Timeout to stop it.
	*/
	if(gtgTransac != 0)
	{
		gtgSend = 0;
		gtgRecv = 0;
		gtgTransac = 0;
		asd_closeSocket(btSockfd);
		btSockfd = -1;
#ifdef WFA_WMM_EXT
		/* Voice End 2 End Sync */
		min_rttime = 0xFFFFFFFF;
		if(gtgStartSync != 0)
		{
			gtgStartSync = 0;
			DPRINT_INFO(WFA_OUT, "stopping StartSync\n");
		}

		if(gtgFinishSync != 0)
		{
			/* derive the clock drift */
			wfa_syncd_time(&gtgStartSyncTime, &gtgFinishSyncTime);

			gtgFinishSync = 0;
			DPRINT_INFO(WFA_OUT, "stoping Finish Sync\n");
		}
#endif /* WFA_WMM_EXT */
	}

#ifdef WFA_WMM_EXT
	/*
	* all WMM streams also stop
	*/
	for(i=0; i<WFA_TRAFFIC_CLASS_NUM; i++)
	{
		wmm_thr[i].thr_flag = 0;
	}
#endif /* WFA_WMM_EXT */
	/* all alarms need to reset */

	alarm(0);
}
#endif /* !WIN32 */
/*
 * findStreamProfile(): search existing stream profile by stream id
 * input: id - stream id;
 * return: matched stream profile
 */
tgStream_t *findStreamProfile(int id)
{
	int i;
	tgStream_t *myStream = gStreams;

	for(i = 0; i< WFA_MAX_TRAFFIC_STREAMS; i++)
	{
		if(myStream->id == id)
			return myStream;

		myStream++;
	}

	return NULL;
}

/*
 * wfaTGSendPing(): Instruct Traffic Generator to send ping packets
 *
 */
int wfaTGSendPing(int len, BYTE *caCmdBuf, int *respLen, BYTE *respBuf)
{
	int totalpkts;

	char cmdStr[WFA_BUFF_128];

	int streamid = ++streamId;
	float interval;      /* it could be subseconds/100s minisecond */
	tgPingStart_t *staPing = (tgPingStart_t *)caCmdBuf;
	dutCmdResponse_t *spresp = &gGenericResp;

#ifdef WFA_PING_UDP_ECHO_ONLY
	tgStream_t *myStream = NULL;
#endif
	DPRINT_INFO(WFA_OUT, "Entering wfaTSendPing ...\n");
	if(staPing->frameSize == 0)
		staPing->frameSize = 100;

	if(staPing->frameRate == 0)
		staPing->frameRate = 1;

	interval = (float)1/staPing->frameRate;

	if(staPing->duration == 0)
		staPing->duration = 30;

	switch(staPing->type)
	{
	case WFA_PING_ICMP_ECHO:
#ifndef WFA_PING_UDP_ECHO_ONLY
		totalpkts = staPing->duration * staPing->frameRate;

#ifndef WIN32
		sprintf(cmdStr, "echo streamid=%i > %s; %s -c %i -s %i -q  %s >> %s 2>/dev/null&",
			streamid, SPOUT_FILE_PATH, PING_PATH,  totalpkts, staPing->frameSize, staPing->dipaddr, SPOUT_FILE_PATH);
		system(cmdStr);

#endif

		spresp->status = STATUS_COMPLETE;
		spresp->streamId = streamid;
#else
		DPRINT_INFO(WFA_OUT, "Only support UDP ECHO\n");
#endif
		break;

	case WFA_PING_UDP_ECHO:
		{
#ifdef WFA_PING_UDP_ECHO_ONLY
			/*
			* Make this like a transaction testing
			* Then make it a profile and run it
			*/
			myStream = &gStreams[slotCnt++];
			memset(myStream, 0, sizeof(tgStream_t));
			memcpy(&myStream->profile, caCmdBuf, len);
			myStream->id = streamid; /* the id start from 1 */
			myStream->tblidx = slotCnt-1;

			btSockfd = wfaCreateUDPSock("127.0.0.1", WFA_UDP_ECHO_PORT);
			if((btSockfd = wfaConnectUDPPeer(btSockfd, staPing->dipaddr, WFA_UDP_ECHO_PORT)) > 0)
			{
				gtgTransac = streamid;
				gtgSend = streamid;
				totalTranPkts = 512;
				sentTranPkts = 0;

				/*
				* the framerate here is used to derive the timeout
				* value for waiting transaction echo responses.
				*/
				gtimeOut = MINISECONDS/staPing->frameRate;  /* in msec */
				gRegSec = 0;

				/* set to longest time */
				if(staPing->duration == 0)
					staPing->duration = 3600;
			}
#else
			DPRINT_INFO(WFA_OUT, "Doesn't support UDP Echo\n");
#endif
			break;
		}
	default:
		{
			spresp->status = STATUS_INVALID;
			spresp->streamId = streamid;
		}
	}


	wfaEncodeTLV(WFA_TRAFFIC_SEND_PING_RESP_TLV, sizeof(dutCmdResponse_t), (BYTE *)spresp, respBuf);
	*respLen = WFA_TLV_HDR_LEN + sizeof(dutCmdResponse_t);

	return TRUE;
}

/*
 * tgStopPing(): Instruct Traffic Generator to stop ping packets
 *
 */
int wfaTGStopPing(int len, BYTE *caCmdBuf, int *respLen, BYTE *respBuf)
{
	int streamid = (int )(caCmdBuf+4);
	dutCmdResponse_t *stpResp = &gGenericResp;
	FILE *tmpfile = NULL;
	tgStream_t *myStream;
#ifndef WIN32
	char strout[WFA_BUFF_256];
#else
	FILE *stptmpFile = NULL;
	unsigned int  position =0, recbfping =0, sentbfping =0, received =0, sent =0;
#endif
	stpResp->status = STATUS_COMPLETE;

	DPRINT_INFO(WFA_OUT, "Entering wfaTStopPing ...\n");
	if(( gtgTransac == streamid) && (gtgSend == streamid))
	{
		gtgTransac =0;
		gtgSend = 0;
		gtimeOut = 0;
		gtgRecv = 0;
#ifndef WIN32
		alarm(0);
#endif
		gRegSec = 1;
		myStream = findStreamProfile(streamid);
		if(myStream == NULL)
		{
			stpResp->status = STATUS_INVALID;
		}

		stpResp->cmdru.pingStp.sendCnt = myStream->stats.txFrames;
		stpResp->cmdru.pingStp.repliedCnt = myStream->stats.rxFrames;
	}
	else
	{
#ifndef WIN32
		/* Ping will be stopped after the specified duration which will
		* be specified by the user at the time send ping. For some reason popen with grep 
		* does not work well in Intel PXA with Linux
		* Use system() call for such things and avoid using popen
		*/

		sprintf(strout, "cat %s |grep transmitted | awk '{print $1,$4}' >%s 2>&1",
		SPOUT_FILE_PATH, TMP_FILE_PATH);

		system(strout);

		tmpfile = fopen(TMP_FILE_PATH, "rb");

		if (tmpfile == NULL) {
			DPRINT_ERR(WFA_ERR, "\nShell Cmd:File open error\n");
			stpResp->status = STATUS_COMPLETE;

			wfaEncodeTLV(WFA_TRAFFIC_STOP_PING_RESP_TLV, sizeof(dutCmdResponse_t), (BYTE *)stpResp, respBuf);
			*respLen = WFA_TLV_HDR_LEN + sizeof(dutCmdResponse_t);

			return TRUE;
		}
		DPRINT_INFO(WFA_OUT,"\nCmdStr is:%s\n", strout);      
		fgets(strout, sizeof(strout), tmpfile);
		stpResp->cmdru.pingStp.sendCnt = atoi(strout);
		fgets(strout, sizeof(strout), tmpfile);
		stpResp->cmdru.pingStp.repliedCnt = atoi(strout); 
		fclose(tmpfile);

		remove(TMP_FILE_PATH);
#else
		if(exitcode ){
			TerminateProcess(processHandle, exitcode);
		}

		tmpfile = fopen("temp\\RWL\\pingstats.txt", "r+");
		if(tmpfile == NULL)
		{
			stpResp->status = STATUS_COMPLETE;

			wfaEncodeTLV(WFA_TRAFFIC_STOP_PING_RESP_TLV, sizeof(dutCmdResponse_t), (BYTE *)stpResp, respBuf);
			*respLen = WFA_TLV_HDR_LEN + sizeof(dutCmdResponse_t);

			return FALSE;
		}

		GetStats(tmpfile, L"Sent =", &position, " ");
		stpResp->cmdru.pingStp.sendCnt = position;
		GetStats(tmpfile, L"Received =", &position, " ");
		stpResp->cmdru.pingStp.repliedCnt = position;
		fclose(tmpfile);
#endif
	}
	wfaEncodeTLV(WFA_TRAFFIC_STOP_PING_RESP_TLV, sizeof(dutCmdResponse_t), (BYTE *)stpResp, respBuf);
	*respLen = WFA_TLV_HDR_LEN + sizeof(dutCmdResponse_t);

	return TRUE;
}

/*
 * wfaTGConfig: store the traffic profile setting that will be used to
 *           instruct traffic generation.
 * input: cmd -- not used
 * response: send success back to controller
 * return: success or fail
 * Note: the profile storage is a global space.
 */
int wfaTGConfig(int len, BYTE *caCmdBuf, int *respLen, BYTE *respBuf)
{
	int ret = FALSE;
	tgStream_t *myStream = NULL;
	dutCmdResponse_t *confResp = &gGenericResp;

	DPRINT_INFO(WFA_OUT, "slotCnt = %d\n", slotCnt);
	/* if the stream table over maximum, reset it */
	if(slotCnt == WFA_MAX_TRAFFIC_STREAMS)
		slotCnt = 0;
	if(slotCnt == 0)
	{
		memset(gStreams, 0, WFA_MAX_TRAFFIC_STREAMS*sizeof(tgStream_t));
	}

	DPRINT_INFO(WFA_OUT,  "entering tcConfig ...\n");
	myStream = &gStreams[slotCnt++];
	memset(myStream, 0, sizeof(tgStream_t));
	memcpy(&myStream->profile, caCmdBuf, len);
	myStream->id = ++streamId; /* the id start from 1 */
	myStream->tblidx = slotCnt-1;

	DPRINT_INFO(WFA_OUT, "profile %i direction %i dest ip %s dport %i source %s sport %i rate %i duration %i size %i class %i delay %i\n", myStream->profile.profile, myStream->profile.direction, myStream->profile.dipaddr, myStream->profile.dport, myStream->profile.sipaddr, myStream->profile.sport, myStream->profile.rate, myStream->profile.duration, myStream->profile.pksize, myStream->profile.trafficClass, myStream->profile.startdelay);

	confResp->status = STATUS_COMPLETE;
	confResp->streamId = myStream->id;
	wfaEncodeTLV(WFA_TRAFFIC_AGENT_CONFIG_RESP_TLV, sizeof(dutCmdResponse_t), (BYTE *)confResp, respBuf);
	*respLen = WFA_TLV_HDR_LEN + sizeof(dutCmdResponse_t);


	return ret;
}

/*
 * wfaTGRecvStart: instruct traffic generator to start receiving
 *                 based on a profile
 * input:      cmd -- not used
 * response:   inform controller for "running"
 * return:     success or failed
 *
 * In this function we create the UDP sockets for receiving the traffic and then
 * set the global flag gtgRecv to indicate the receive thread to receive the incoming traffic.
 * In the case of IPTV profile we multiple Create Events for multiple streams 
 */

int wfaTGRecvStart(int len, BYTE *parms, int *respLen, BYTE *respBuf)
{
	int status = STATUS_COMPLETE, i;
	int numStreams = len/4;
	int streamid, so;
	tgProfile_t *theProfile;
	tgStream_t *myStream;

	DPRINT_INFO(WFA_OUT, "entering tgRecvStart %i\n", numStreams);

	/*
	* The function wfaSetProcPriority called here is to enhance the real-time
	* performance for packet receiving. It is only for tuning and optional
	* to implement
	*/
	//wfaSetProcPriority(60);
	for(i=0; i<numStreams; i++) {
		memcpy(&streamid, parms+(4*i), 4); /* changed from 2 to 4, bug reported by n.ojanen */

		myStream = findStreamProfile(streamid);
		if(myStream == NULL)
		{
			status = STATUS_INVALID;
			return status;
		}

		theProfile = &myStream->profile;
		if(theProfile == NULL)
		{
			status = STATUS_INVALID;
			return status;
		}

		/* calculate the frame interval which is used to derive its jitter */
		if(theProfile->rate != 0 && theProfile->rate < 5000)
			myStream->fmInterval = 1000000/theProfile->rate; /* in ms */
		else
			myStream->fmInterval = 0;

		if(theProfile->direction != DIRECT_RECV)
		{
			status = STATUS_INVALID;
			return status;
		}

		memset(&myStream->stats, 0, sizeof(tgStats_t));
		switch(theProfile->profile)
		{
		case PROF_FILE_TX:
			status = STATUS_COMPLETE;
			btRecvSockfd = wfaCreateUDPSock(theProfile->dipaddr, theProfile->dport);
			if(btRecvSockfd > 0) {
				gtgRecv = streamid;
#ifdef WIN32
				/*Create receive event which is initially non-signalled and 
				* later  reset the state of the signal when we call the command 
				* WfaRecvStop() */
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0) {
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());

				}
#endif
				/*Creating a thread for receiving traffic in case of File_Transfer, Transac,Multicast */
				wfaRecvThrCreate();				
			}
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;

				return TRUE;
			}

			break;
		case PROF_FILE_TX_TCP:
			gTCPsock = 1;
			status = STATUS_COMPLETE;
			gTcpRecvSockfd = wfaCreateTCPServSock(theProfile->dport);
			if(gTcpRecvSockfd > 0) {
				gtgRecv = streamid;
#ifdef WIN32
				/*Create receive event which is initially non-signalled and
				 * later  reset the state of the signal when we call the command
				 * WfaRecvStop() */
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0) {
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());
				}
#endif
				/*Creating a thread for receiving traffic in case of File_Transfer, Transac,Multicast */
				wfaRecvThrCreate();
			}
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}
			break;

		case PROF_MCAST:
			status = STATUS_COMPLETE;
			btRecvSockfd = wfaCreateUDPSock(theProfile->dipaddr, theProfile->dport);
			DPRINT_INFO(WFA_OUT, "MCAST: RecvStart: btRecvSockfd = %d\r\n",btRecvSockfd);
			if(btRecvSockfd > 0)
			{
#ifdef WIN32
				/*Create receive event which is initially non-signalled and 
				* later  automatically reset the state of the signal
				* when the receive thread exits.  */
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());
				}
#endif				
				gtgRecv = streamid;
				/*Creating a thread for receiving traffic in case of File_Transfer, Transac,Multicast */
				wfaRecvThrCreate();

			}
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}
			DPRINT_INFO(WFA_OUT, "MCAST: RecvStart:before McastRecvOpt: btRecvSockfd = %d\r\n",btRecvSockfd);
			/* set multicast socket option for receiver */
			DPRINT_INFO(WFA_OUT, "MCAST: RecvStart: McastRecvOpt: theProfile->dipaddr = %s\r\n",theProfile->dipaddr);
			so = wfaSetSockMcastRecvOpt(btRecvSockfd, theProfile->dipaddr);
			if(so < 0)
			{
				DPRINT_INFO(WFA_OUT, "MCAST: RecvStart: McastRecvOpt: so<0: btRecvSockfd = %d\r\n",btRecvSockfd);
				asd_closeSocket(btRecvSockfd);
				gtgRecv = 0;
				btRecvSockfd = -1;
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;

				return TRUE;
			}

			break;

		case PROF_IPTV:
			status = STATUS_COMPLETE;
			/*Create multiple streams and get the socket values in the array*/
			tgSockfds[myStream->tblidx] = wfaCreateUDPSock(theProfile->dipaddr, theProfile->dport);
			DPRINT_INFO(WFA_OUT, "sock fd prof iptv = %d , streamid = %d\n", tgSockfds[myStream->tblidx], streamid);
			if(tgSockfds[myStream->tblidx] > 0){
#ifdef WIN32	
				/* Create multiple event for different recv streams and get
				* the values in the array of recv handles, Which will be later used in 
				* WfaRecvStop() to signal the recv thread to stop the recv process. */		  
				if((g_recvEvent[myStream->tblidx] = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());

				}

				DPRINT_INFO(WFA_OUT, "recvstart g_recvEvent[myStream->tblidx] = %i\r\n", g_recvEvent[myStream->tblidx]);
#endif
				gtgRecv = streamid;
				/*Create a thread to receive IPTV traffic.  */
				wfaIPTVRecvThrCreate(myStream->tblidx);
		 }
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}
			break;

		case PROF_TRANSC:
		case PROF_START_SYNC:
		case PROF_CALI_RTD:  /* Calibrate roundtrip delay */
			status = STATUS_COMPLETE;
			btRecvSockfd = wfaCreateUDPSock(theProfile->sipaddr, theProfile->sport);
			totalTranPkts = 0xFFFFFFF0;
			sentTranPkts = 0;
			if(btRecvSockfd > 0)
			{
				gtgTransac = streamid;
				gtgRecv = streamid;
#ifdef WIN32               
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());

				}
#endif
				/*Creating a thread for receiving traffic in case of File_Transfer, Transac,Multicast */
				wfaRecvThrCreate();
			}
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}

			break;

		case PROF_TRANSC_TCP:
			gTCPsock = 1;
			status = STATUS_COMPLETE;
			gTcpRecvSockfd = wfaCreateTCPServSock(theProfile->dport);
			if(gTcpRecvSockfd > 0)
			{
				gtgTransac = streamid;
				gtgRecv = streamid;
#ifdef WIN32               
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());
				}
#endif
				/*Creating a thread for receiving traffic in case of File_Transfer, Transac,Multicast */
				wfaRecvThrCreate();
			}
			else
			{
				status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4, (BYTE *)&status, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}
			break;

		case PROF_UAPSD:
#ifdef WFA_WMM_EXT
#ifdef WFA_WMM_PS_EXT
		     status = STATUS_COMPLETE;
			 psSockfd = wfaCreateUDPSock(theProfile->dipaddr, WFA_WMMPS_UDP_PORT);

			 wmmps_info.sta_state = 0;
			 wmmps_info.wait_state = WFA_WAIT_STAUT_00;
#ifdef WIN32              
			 init_wmmps_thr(); 
				if((g_hRecvEvent = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
					DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());

				}
#endif
			 memset(&wmmps_info.psToAddr, 0, sizeof(wmmps_info.psToAddr));
			 wmmps_info.psToAddr.sin_family = AF_INET;
			 wmmps_info.psToAddr.sin_addr.s_addr = inet_addr(theProfile->sipaddr);
			 wmmps_info.psToAddr.sin_port = htons(theProfile->sport);
			 wmmps_info.reset = 0;
			
			 wmm_thr[usedThread].thr_flag = streamid;
			 wmmps_info.streamid = streamid;
#ifndef WIN32
			 pthread_mutex_lock(&wmm_thr[usedThread].thr_flag_mutex);
			 pthread_cond_signal(&wmm_thr[usedThread].thr_flag_cond);
			 gtgWmmPS = streamid;;
			 pthread_mutex_unlock(&wmm_thr[usedThread].thr_flag_mutex);
			 usedThread++;
#else
			 SetEvent(thr_flag_cond);
			 gtgWmmPS = streamid;
#endif /* WIN32 */
			 gtimeOut = MINISECONDS/10;  /* in msec */
			 gRegSec = 0;
			 
			 /* Create the receiver thread */
		     wfaRecvThrCreate();
#endif   /* WFA_WMM_PS_EXT */
#endif   /* WFA_WMM_EXT */
			break;
		}
	}

	/* encode a TLV for response for "complete/error ..." */
	wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_START_RESP_TLV, 4,
		(BYTE *)&status, respBuf);
	*respLen = WFA_TLV_HDR_LEN + 4;

	return TRUE;
}

/*
 * tgRecvStop: instruct traffic generator to stop receiving based on a profile
 * input:      cmd -- not used
 * response:   inform controller for "complete"
 * return:     success or failed
 *
 * In this function we will reset the gtgRecv flag, close the UDP sockets opened in the
 * receive start to stop receiving the traffic from TG. We also kill the thread that was created
 * in receive start*/
int wfaTGRecvStop(int len, BYTE *parms, int *respLen, BYTE *respBuf)
{
	int status = STATUS_COMPLETE, i, j;
	int numStreams = len/4;
	int streamid;
	tgProfile_t *theProfile;
	tgStream_t *myStream=NULL;
	dutCmdResponse_t statResp;
	BYTE dutRspBuf[WFA_BUFF_1K];
	int id_cnt = 0;
	FILE *e2eoutp = NULL;
#ifndef WIN32
	struct timeval currtime;
#else
	SYSTEMTIME currtime;
#endif

	DPRINT_INFO(WFA_OUT, "entering tgRecvStop\n");

	memset(dutRspBuf, 0, WFA_BUFF_1K);

	for(i=0; i<numStreams; i++)
	{
		memcpy(&streamid, parms+(4*i), 4);
		myStream = findStreamProfile(streamid);
		if(myStream == NULL)
		{
			status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_STOP_RESP_TLV, 4, (BYTE *)&status, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;
			return TRUE;
		}

		theProfile = &myStream->profile;
		if(theProfile == NULL)
		{
			status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_STOP_RESP_TLV, 4, (BYTE *)&status, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;

			return TRUE;
		}

		if(theProfile->direction != DIRECT_RECV)
		{
			status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_STOP_RESP_TLV, 4, (BYTE *)&status, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;

			return TRUE;
		}
		/* reset its flags , close sockets */
		gtgRecv = 0;
		switch(theProfile->profile)
		{
		case PROF_FILE_TX:
		case PROF_FILE_TX_TCP:
#ifdef WIN32
			/*Set the recv event and signal the recv thread function to stop
			* Receiving the File transfer Traffic, also close the handle of the event*/
			if(SetEvent(g_hRecvEvent) == 0) {
				DPRINT_INFO(WFA_OUT, "ResetEvent failure %d \n", GetLastError());
			}
			while ((WaitForSingleObject(g_RecvhThread, INFINITE) != WAIT_OBJECT_0));
			if(g_hRecvEvent != NULL)
				CloseHandle(g_hRecvEvent);

#else
			/* Waiting for signal from wfaRecvStart once the receive 
			 * operation is complete in order to close the socket 
			 */
			sem_wait(&sem_gtgrecv);
#endif
			if(gTcpRecvSockfd != -1) {
				gTCPsock = 0;
				asd_closeSocket(gTcpRecvSockfd);
				gTcpRecvSockfd = -1;
			}
			if(btRecvSockfd != -1) {
				asd_closeSocket(btRecvSockfd);
				btRecvSockfd = -1;
			}
			break;

		case PROF_MCAST:
#ifdef WIN32
			/* Set the recv event and signal the recv thread function to stop
			* Receiving the Multicast Traffic, also close the handle of the event*/
			if(SetEvent(g_hRecvEvent) == 0) {
				DPRINT_INFO(WFA_OUT, "ResetEvent failure %d \n", GetLastError());
			}
			while ((WaitForSingleObject(g_RecvhThread, INFINITE) != WAIT_OBJECT_0));
			if(g_hRecvEvent != NULL)
				CloseHandle(g_hRecvEvent);
#else
			/* Waiting for signal from wfaRecvStart once the receive 
			 * operation is complete in order to close the socket 
			 */
			sem_wait(&sem_gtgrecv);
#endif
			if(btRecvSockfd != -1){
				asd_closeSocket(btRecvSockfd);
				btRecvSockfd = -1;
			}
			break;

		case PROF_IPTV:
			IPTVprof = 0;
#ifdef WIN32
			/* Set the recv event and signal the recv thread function to stop
			* Receiving the IPTV traffic in the case of multiple streams,
			* also close the handles of the multiple events*/
			if(SetEvent(g_recvEvent[myStream->tblidx]) == 0) {
				DPRINT_INFO(WFA_OUT, "ResetEvent failure %d \n", GetLastError());
			}
			while ((WaitForSingleObject(g_IPTVRecvhThread[myStream->tblidx], INFINITE) != WAIT_OBJECT_0));
			if(g_recvEvent[myStream->tblidx] != NULL)
				CloseHandle(g_recvEvent[myStream->tblidx]);
#else
			/* Waiting for signal from wfaIPTVRecvStart once the receive 
			 * operation is complete in order to close the socket 
			 */
			sem_wait(&sem_iptv_gtgrecv[myStream->tblidx]);
#endif
			if(tgSockfds[myStream->tblidx] != -1){
				asd_closeSocket(tgSockfds[myStream->tblidx]);
				tgSockfds[myStream->tblidx] = -1;
			}
			/* the following to report the result. There will be a
			* solution to send it back to TM
			*/
			//#endif
			break;

		case PROF_TRANSC:
		case PROF_TRANSC_TCP:
		case PROF_START_SYNC:
		case PROF_CALI_RTD:  /* Calibrate roundtrip delay */
			gtgTransac = 0;
#ifdef WIN32
			/* Set the recv event and signal the recv thread function to stop
			* Receiving the Transaction Traffic, also close the handle of the event*/
			if(SetEvent(g_hRecvEvent) == 0){
				DPRINT_INFO(WFA_OUT, "ResetEvent failure %d \n", GetLastError());
			}
			while ((WaitForSingleObject(g_RecvhThread, INFINITE) != WAIT_OBJECT_0));
			if(g_hRecvEvent != NULL)
				CloseHandle(g_hRecvEvent);
#else
			/* Waiting for signal from wfaRecvStart once the receive 
			 * operation is complete in order to close the socket 
			 */
			sem_wait(&sem_gtgrecv);
#endif
			if(gTcpRecvSockfd != -1) {
				gTCPsock = 0;
				asd_closeSocket(gTcpRecvSockfd);
				gTcpRecvSockfd = -1;
			}
			if(btRecvSockfd != -1){
				asd_closeSocket(btRecvSockfd);
				btRecvSockfd = -1;
			}
			break;
		case PROF_UAPSD:
#ifdef WFA_WMM_EXT
#ifdef WFA_WMM_PS_EXT
			gtgWmmPS = 0;
			gtgPsPktRecvd = 0;

			if(psSockfd != -1)
			{
				asd_closeSocket(psSockfd);
				psSockfd = -1;
			}

			memset(&wmmps_info, 0, sizeof(wfaWmmPS_t));

			wfaSetDUTPwrMgmt(PS_OFF);
#endif /* WFA_WMM_PS_EXT */
#endif /* WFA_WMM_EXT */
			break;
		}
		/* encode a TLV for response for "complete/error ..." */
		statResp.status = STATUS_COMPLETE;
		statResp.streamId = streamid;
		DPRINT_INFO(WFA_OUT, "stream Id %i rx %i total %i\n", streamid, myStream->stats.rxFrames, myStream->stats.rxPayloadBytes);
		memcpy(&statResp.cmdru.stats, &myStream->stats, sizeof(tgStats_t));
		memcpy((dutRspBuf + i * sizeof(dutCmdResponse_t)), (BYTE *)&statResp, sizeof(dutCmdResponse_t));
		id_cnt++;
		memset(myStream, 0, sizeof(tgStream_t));
	}

	wfaEncodeTLV(WFA_TRAFFIC_AGENT_RECV_STOP_RESP_TLV, (WORD)(id_cnt * sizeof(dutCmdResponse_t)), dutRspBuf, respBuf);

	/* done here */
	*respLen = WFA_TLV_HDR_LEN + numStreams * sizeof(dutCmdResponse_t);
	return TRUE;
}

/*
 * wfaTGSendStart: instruct traffic generator to start sending based on a profile
 * input:      cmd -- not used
 * response:   inform controller for "running"
 * return:     success or failed
 *
 * In this function we will create the UDP sockets to send the traffic
 * and set the global flag gtgSend, increment usedThread for each stream
 * also set the socket option and type ofservice bits (TOS) in 
 * the case of Multicast profiles . We also
 * Call the thread Win32_tmout_stop_send() which sleeps for the duration specified in the profile
 * and then stops the sending of the traffic by resetting the  runloop, decrement usedThread .
 */
int wfaTGSendStart(int len, BYTE *parms, int *respLen, BYTE *respBuf)
{
	int i=0, streamid=0, so;
	int numStreams = len/4;
	tgProfile_t *theProfile;
	tgStream_t *myStream = NULL;
	dutCmdResponse_t sendResp;
#ifdef WIN32
	DWORD errnum;
#endif
#ifdef WFA_DUT_SYNC
#ifndef WIN32
	pthread_attr_t ptAttr;
	int ptPolicy;

	struct sched_param ptSchedParam;
	struct timeval btime;
#else
	SYSTEMTIME btime;
#endif
#endif
	dutCmdResponse_t staSendResp;


#ifdef WIN32
	/*Create an event which will wait for the traffic streams to complete the send operation */
	if((send_event = CreateEvent(NULL, FALSE, TRUE, NULL)) == 0){
		DPRINT_INFO(WFA_OUT, "CreateEvent Failed = %d\r\n", GetLastError());
	}
#else

	gnumStreams =  numStreams;
#endif
	DPRINT_INFO(WFA_OUT, "Entering tgSendStart for %i streams ...\n", numStreams);


	for(i=0; i<numStreams; i++)
	{
		memcpy(&streamid, parms+(4*i), 4);
		myStream = findStreamProfile(streamid);
		if(myStream == NULL)
		{
			staSendResp.status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;
			return TRUE;
		}

		theProfile = &myStream->profile;
		if(theProfile == NULL)
		{
			staSendResp.status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;

			return TRUE;
		}

		if(theProfile->direction != DIRECT_SEND)
		{
			staSendResp.status = STATUS_INVALID;
			wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
			*respLen = WFA_TLV_HDR_LEN + 4;

			return TRUE;
		}

		/*
		* need to reset the stats
		*/
		memset(&myStream->stats, 0, sizeof(tgStats_t));
		/* Here increment the usedThread for every time we wish to send a stream 
		* so as to maintain the count of streams that are running at the same time.
		*/
		switch(theProfile->profile)
		{
		case PROF_FILE_TX:
			btSockfd = wfaCreateUDPSock(theProfile->sipaddr, theProfile->sport);
			if((btSockfd=wfaConnectUDPPeer(btSockfd, theProfile->dipaddr, theProfile->dport)) > 0)
			{
				gtgSend = streamid;
				usedThread++;
#ifndef WIN32
				SendFile();
#else
				g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendFile, (LPVOID)streamid, 0, &dwIPTVThread);
				if(g_TGSndThr[i] == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
			} 
#endif
			}
			else
			{
				gtgSend = 0;
				staSendResp.status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;

				return TRUE;
			}

			break;
		case PROF_FILE_TX_TCP:
			if((btSockfd=wfaConnectTCPPeer(theProfile->sport, theProfile->dipaddr, theProfile->dport)) > 0)
			{
				gtgSend = streamid;
				usedThread++;
#ifndef WIN32
				SendFile();
#else
				g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendFile, (LPVOID)streamid, 0, &dwIPTVThread);
				if(g_TGSndThr[i] == NULL){
					errnum = GetLastError();
					DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
					return TRUE;
				}
#endif
			}
			else
			{
				gtgSend = 0;
				staSendResp.status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}
			break;
		case PROF_MCAST:
			btSockfd = wfaCreateUDPSock(theProfile->sipaddr, theProfile->sport);
			if(btSockfd > 0)
			{
				gtgSend = streamid;
				usedThread ++;
			}
			else
			{
				staSendResp.status = STATUS_ERROR;

				wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;

				return TRUE;
			}

			so = wfaSetSockMcastSendOpt(btSockfd);
			if (so < 0)
			{
#ifdef WIN32
				DPRINT_INFO(WFA_OUT,  "setsockopt for mcast: %d\n",WSAGetLastError());
#endif
				gtgSend = 0;
				asd_closeSocket(btSockfd);
				btSockfd = -1;
				staSendResp.status = STATUS_ERROR;

				wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;

				return TRUE;
			}
#ifndef WIN32
				SendFile();
#else
				g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendFile, (LPVOID)gtgSend, 0, &dwIPTVThread);
				if(g_TGSndThr[i] == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
			} 
#endif
			break;
		case PROF_IPTV:

			IPTVprof = 1;
			gtgSend = streamid;
			usedThread++;
#ifndef WIN32

			/*
			* singal the thread to Sending WMM traffic
			*/
			wmm_thr[usedThread].thr_flag = streamid;
			pthread_mutex_lock(&wmm_thr[usedThread].thr_flag_mutex);
			pthread_cond_signal(&wmm_thr[usedThread].thr_flag_cond);
			pthread_mutex_unlock(&wmm_thr[usedThread].thr_flag_mutex);
#else
			/* Create thread to send the IPTV stream, and store the handle of the thread in the array of the handles.
			* New thread is created everytime in the case of multiple streams, to send the traffic simultaneously.
			*/
			g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendIPTVFile, (LPVOID)streamid, 0, &dwIPTVThread);
			DPRINT_INFO(WFA_OUT, "Thread create Handle %x\n", g_TGSndThr[i]);
			if(g_TGSndThr[i] == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
			} 

#endif
			DPRINT_INFO(WFA_OUT, "wfa_wmm_thread: myProfile->startdelay %i\n", theProfile->startdelay);
			/* if delay is too long, it must be something wrong */
			DPRINT_INFO(WFA_OUT, "sleep for %d\n", theProfile->startdelay);


#ifdef WFA_DUT_SYNC
			//reset clock by estimate drift
			gettimeofday(&btime, NULL);

			DPRINT_INFO(WFA_OUT, "btime.tv_sec %u, btime.tv_usec %u last sync time %f\n", (unsigned int) btime.tv_sec, (unsigned int) btime.tv_usec, gtgStartSyncTime.dut_time);

			double bdftime = wfa_timeval2double(&btime) - (gtgStartSyncTime.dut_time);
			traf_start_drift = clock_drift_ps * bdftime;

			DPRINT_INFO(WFA_OUT, "time gap %lf traf_start_drift %i\n", bdftime, traf_start_drift);

			if(abs(traf_start_drift) > 50)
			{
				DPRINT_INFO(WFA_OUT, "traf_start_drift %i\n", traf_start_drift);

				btime.tv_usec += traf_start_drift;
				if(btime.tv_usec < 0)
				{
					btime.tv_sec -= 1;
					btime.tv_usec +=1000000;
				}
				else if(btime.tv_usec >=1000000)
				{
					btime.tv_sec +=1;
					btime.tv_usec -= 1000000;
				}

				// clock get reset
				settimeofday(&btime, NULL);

				// ajust the sync time for the next run.
				gtgStartSyncTime.dut_time = wfa_timeval2double(&btime);
				clock_drift_ppk = (double) clock_drift_ps / (double) theProfile->rate;
			}
#endif
			break;

		case PROF_TRANSC:
			{
				btSockfd = wfaCreateUDPSock(theProfile->sipaddr, theProfile->sport);
				if((btSockfd = wfaConnectUDPPeer(btSockfd, theProfile->dipaddr, theProfile->dport)) > 0)
				{
					gtgTransac = streamid;
					gtgSend = streamid;
					totalTranPkts = theProfile->rate * theProfile->duration;
					sentTranPkts = 0;
					/*
					* the framerate here is used to derive the timeout
					* value for waiting transaction echo responses.
					*/
					if(theProfile->rate == 0){
						gtimeOut = MINISECONDS;  /* in msec */     
					} else {
						gtimeOut = MINISECONDS/theProfile->rate;  /* in msec */
					}
					gRegSec = 0;
					usedThread++;
				}
				else
				{
					staSendResp.status = STATUS_ERROR;
					wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
					*respLen = WFA_TLV_HDR_LEN + 4;

					return TRUE;
				}

				/* set duration for the test */
#ifndef WIN32
				signal(SIGALRM, tmout_stop_send);
				alarm(theProfile->duration);
#else
				if(hThread1 != NULL){
					CloseHandle(hThread1);
				}
				hThread1 = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) Win32_tmout_stop_send, (LPVOID)(theProfile->duration *1000), 0, &dwGenericThread1);
				if(hThread1 == NULL){
					errnum = GetLastError();
					DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
					return TRUE;
				}
#endif
#ifndef WIN32
				SendFile();
#else
				g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendFile, (LPVOID)gtgSend, 0, &dwIPTVThread);
				if(g_TGSndThr[i] == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
				} 
#endif
			}
			break;
		case PROF_TRANSC_TCP:
			if((btSockfd=wfaConnectTCPPeer(theProfile->dport, theProfile->dipaddr, theProfile->dport)) > 0)
			{
				gtgTransac = streamid;
				gtgSend = streamid;
				totalTranPkts = theProfile->rate * theProfile->duration;
				sentTranPkts = 0;
				/*
				 * the framerate here is used to derive the timeout
				 * value for waiting transaction echo responses.
				 */
				if(theProfile->rate == 0){
					gtimeOut = MINISECONDS;  /* in msec */     
				} else {
					gtimeOut = MINISECONDS/theProfile->rate;  /* in msec */
				}
				gRegSec = 0;
				usedThread++;
			}
			else
			{
				staSendResp.status = STATUS_ERROR;
				wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, 4, (BYTE *)&staSendResp, respBuf);
				*respLen = WFA_TLV_HDR_LEN + 4;
				return TRUE;
			}

			/* set duration for the test */
#ifndef WIN32
			signal(SIGALRM, tmout_stop_send);
			alarm(theProfile->duration);
#else
			if(hThread1 != NULL){
				CloseHandle(hThread1);
			}
			hThread1 = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) Win32_tmout_stop_send, (LPVOID)(theProfile->duration *1000), 0, &dwGenericThread1);
			if(hThread1 == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
			}
#endif
#ifndef WIN32
			SendFile();
#else
			g_TGSndThr[i] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) SendFile, (LPVOID)gtgSend, 0, &dwIPTVThread);
			if(g_TGSndThr[i] == NULL){
				errnum = GetLastError();
				DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
				return TRUE;
			} 
#endif
			break;
#ifdef WFA_WMM_EXT
		case PROF_START_SYNC:
		case PROF_CALI_RTD:
			{
				DPRINT_INFO(WFA_OUT, "profile port %i\n", theProfile->sport);
				btSockfd = wfaCreateUDPSock(theProfile->sipaddr, theProfile->sport);
				if((btSockfd = wfaConnectUDPPeer(btSockfd, theProfile->dipaddr, theProfile->dport)) > 0)
				{
					gtgTransac = streamid;
					gtgSend = streamid;
					totalTranPkts = theProfile->rate * theProfile->duration;
					sentTranPkts = 0;
					if(theProfile->profile == PROF_START_SYNC)
						gtgStartSync = streamid;
					else if(theProfile->profile == PROF_CALI_RTD)
						gtgFinishSync = streamid;

					/*
					* the framerate here is used to derive the timeout
					* value for waiting transaction echo responses.
					*/
					gtimeOut = MINISECONDS/theProfile->rate;  /* in msec */
				}
				else
				{
					DPRINT_INFO(WFA_OUT, "connection failed\n");
				}

				/* set duration for the test */
#ifndef WIN32
				signal(SIGALRM, tmout_stop_send);
				alarm(theProfile->duration+1);
#else
				if(hThread2 != NULL){
					CloseHandle(hThread2);
				}
				hThread2 = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) Win32_tmout_stop_send, (LPVOID)((theProfile->duration+1) *1000), 0, &dwGenericThread2);
				if(hThread2 == NULL){
					errnum = GetLastError();
					DPRINT_INFO(WFA_OUT, "Could not create the thread1\n");
					return TRUE;
				}
#endif
			}
			break;
#endif
		default :
			DPRINT_INFO(WFA_OUT, "No profile match findStreams problem\n");	
		}
	}

#ifdef WIN32	
	/* Wait fo the event to be signalled from the timeout function, after all
	*  the threads have finished sending the traffic. 
	* 
	*/
	
		Sleep(theProfile->duration*1000);
		if(SetEvent(send_event)== 0 ){
			DPRINT_INFO(WFA_OUT, "SetEvent failure %d \n", GetLastError());
		}
		for(i = 0; i < numStreams; i++)
		while ((WaitForSingleObject(g_TGSndThr[i], INFINITE) != WAIT_OBJECT_0));
		if(IPTVprof == 1) {
			memset(Send_dutResp, 0, WFA_BUFF_512);
			wfaSentStatsResp(Send_dutResp);
		}
	

	if(send_event != NULL) {
		CloseHandle(send_event);
		send_event = NULL;		 
	}

#else
	sem_wait(&sem_wmm_resp);
	if(IPTVprof) {
		sem_wait(&sem_wmm);
		memset(Send_dutResp, 0, WFA_BUFF_512);
		wfaSentStatsResp(Send_dutResp);
	} 
#endif
	/* update the response */
	if(! IPTVprof) {
		memset(Send_dutResp, 0, WFA_BUFF_512);
		sendResp.status = STATUS_COMPLETE;
		sendResp.streamId = myStream->id;
		memcpy(&sendResp.cmdru.stats, &myStream->stats, sizeof(tgStats_t));
		memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));
	}
	wfaEncodeTLV(WFA_TRAFFIC_AGENT_SEND_RESP_TLV, (WORD)(numStreams* sizeof(dutCmdResponse_t)),Send_dutResp, (BYTE*)respBuf);

	/* done here */
	*respLen = WFA_TLV_HDR_LEN + numStreams * sizeof(dutCmdResponse_t);

	DPRINT_INFO(WFA_OUT, "Leaving send start Check btsockfd = %d\n", btSockfd);
	return TRUE;
}

int wfaTGReset(int len, BYTE *parms, int *respLen, BYTE *respBuf)
{
	dutCmdResponse_t *resetResp = &gGenericResp;

	gtgRecv = 0;
	gtgSend = 0;
	/* need to reset all traffic socket fds */
	if(btSockfd != -1 ) {
		asd_closeSocket(btSockfd);
		btSockfd = -1;
	}

	if (btRecvSockfd != -1) {
		asd_closeSocket(btRecvSockfd);
		btRecvSockfd = -1;
	}

	/* reset the timer alarm if it was armed */
#ifndef WIN32
	alarm(0);
#endif

	/* just reset the flags for the command */
	usedThread = 0;
	gtgTransac = 0;
	totalTranPkts = 0;
	gtimeOut = 0;
	gRegSec = 1; /* mewly added */
	IPTVprof = 0;
	runLoop = 0;
	gTransactrunLoop = 0;

#ifdef WFA_WMM_EXT
	e2eCnt = 0;
	/* changed now */
	memset(e2eStats, 0, 6000*sizeof(tgE2EStats_t));

	/* Start : Modified as per BRCM 1.3 ASD */

#ifdef WFA_WMM_PS_EXT
	gtgWmmPS = 0;
	gtgPsPktRecvd = 0;

	if(psSockfd != -1)
	{
		asd_closeSocket(psSockfd);
		psSockfd = -1;
	}

	memset(&wmmps_info, 0, sizeof(wfaWmmPS_t));

	wfaSetDUTPwrMgmt(PS_OFF);
#endif /* WFA_WMM_EXT */

	/* End : Modified as per BRCM 1.3 ASD */


#endif

	/* Also need to clean up WMM streams NOT DONE YET!*/
	slotCnt = 0;             /* reset stream profile container */


	/* encode a TLV for response for "complete ..." */
	resetResp->status = STATUS_COMPLETE;
	wfaEncodeTLV(WFA_TRAFFIC_AGENT_RESET_RESP_TLV, 4,
		(BYTE *)resetResp, respBuf);
	*respLen = WFA_TLV_HDR_LEN + 4;

	return TRUE;
}

/*
 * calculate the sleep time for different frame rate
 * It should be done according the device
 * This is just one way to adjust the packet delivery speed. If you find
 * you device does not meet the test requirements, you MUST re-adjust
 * the method.
 */

/* The HZ value could be found in the build header file */
/* 100 -> 10ms, 1000 -> 1ms , etc                       */
#define WFA_KERNEL_MIN_TIMER_RES   100   /* HZ Value for 10 ms */

void wfaTxSleepTime(int profile, int rate, int *sleepTime, int *throttledRate)
{
	*sleepTime=0;     /* in microseconds */
	/* calculate the sleep time based on frame rate */

	/*
	* Framerate is still required for Multicast traffic
	* Sleep and hold for a timeout.
	*
	* For WMM traffic, the framerate must also need for VO and VI.
	* the framerate 500, OS may not handle it precisely.
	*/
	switch(profile)
	{
		/*
		* Vendor must find ways to better adjust the speed for their own device
		*/
	case PROF_MCAST:
	case PROF_IPTV:
	case PROF_FILE_TX:
	case PROF_FILE_TX_TCP:
	case PROF_TRANSC:
	case PROF_TRANSC_TCP:
		if(rate >=100 || rate == 0)
		{
			/*
			* this sleepTime indeed is now being used for time period
			* to send packets in the throttled Rate.
			* The idea here is that in each fixed 50 minisecond period,
			* The device will send rate/20 (rate = packets / second),
			* then go sleep for rest of time.
			*/
#ifndef WIN32
			*sleepTime = 50000; /* fixed 50 miniseconds */
#else
			*sleepTime = 50; /* CHANGED FROM 50000 TO 50 fixed 50 miniseconds */
#endif
			*throttledRate = (rate?rate:3000)/20;
			DPRINT_INFO(WFA_OUT, "Sleep time %i, throttledRate %i\n", *sleepTime, *throttledRate);
		}
		else if (rate > 0 && rate <= 50) /* typically for voice */
		{
			*throttledRate = 1;
#ifndef WIN32
			*sleepTime = 1000*1000/rate;
#else
			*sleepTime = 1000/rate;
#endif
		}
		break;
	default:
		DPRINT_ERR(WFA_ERR, "Incorrect profile\n");
	}
}

#ifndef WIN32
#define WFA_TIME_DIFF(before, after, rtime, dtime) \
             dtime = rtime + (after.tv_sec*1000000 + after.tv_usec) - (before.tv_sec*1000000 + before.tv_usec);
#else
#define WFA_TIME_DIFF(before, after, rtime, dtime) \
             dtime = rtime + (after.wSecond +after.wMilliseconds ) - (before.wSecond + before.wMilliseconds );
#endif

void buzz_time(int delay)
{
#ifndef WIN32
	struct timeval now, stop;
#else
	SYSTEMTIME now, stop;
#endif
	int diff;
	int remain_time = 0;

#ifndef WIN32
	gettimeofday(&stop, 0);

	stop.tv_usec += delay;
	if(stop.tv_usec > 1000000)
	{
		stop.tv_usec -=1000000;
		stop.tv_sec +=1;
	}
#else
	GetSystemTime(&stop);
	stop.wMilliseconds +=delay;
	if(stop.wMilliseconds > 1000)
	{
		stop.wMilliseconds -=1000;
		stop.wSecond+=1;
	}
#endif

	do
	{
#ifndef WIN32
		gettimeofday(&now, 0);
		WFA_TIME_DIFF(now, stop, remain_time, diff);
#else
		GetSystemTime(&now);
		WFA_TIME_DIFF(stop, now, remain_time, diff);
#endif

	} while(diff>0);
}

/**************************************************/
/* the actually functions to send/receive packets */
/**************************************************/

/* This is going to be a blocking SEND till it finishes */
int wfaSendLongFile(int mySockfd, int streamid, BYTE *aRespBuf, int *aRespLen)
{
	tgProfile_t           *theProf = NULL;
	tgStream_t            *myStream = NULL;
	struct sockaddr_in    toAddr;
	char                  *packBuf;
	int  packLen;
	int  bytesSent;
	dutCmdResponse_t sendResp;
	int sleepTime = 0;
	int throttledRate = 0;
	int errsv;
#ifndef WIN32
	struct timeval before, after, stime;
#else
	SYSTEMTIME before, after, stime;
#endif
	int difftime = 0;
	int counter = 0;
	int throttled_est_cost;
	int act_sleep_time;

	DPRINT_INFO(WFA_OUT, "Entering sendLongFile %i\n", streamid);

	/* find the profile */
	myStream = findStreamProfile(streamid);
	if(myStream == NULL)
	{
		return FALSE;
	}

	theProf = &myStream->profile;

	if(theProf == NULL)
	{
		return FALSE;
	}

	packLen = theProf->pksize;

	/* allocate a buf */
	packBuf = (char *)malloc(packLen);
	memset(packBuf, 1, packLen);

	/* fill in the header */
	strncpy(packBuf, "1345678", sizeof(tgHeader_t));

	/* initialize the destination address */
	memset(&toAddr, 0, sizeof(toAddr));
	toAddr.sin_family = AF_INET;
	toAddr.sin_addr.s_addr = inet_addr(theProf->dipaddr);
	toAddr.sin_port = htons(theProf->dport);

	/* if a frame rate and duration are defined, then we know
	* interval for each packet and how many packets it needs to
	* send.
	*/

	if(theProf->duration != 0)
	{
		DPRINT_INFO(WFA_OUT, "duration %i\n", theProf->duration);
		/*
		*  use this to decide periodical interval sleep time and frames to send
		*  int the each interval.
		*  Each device should adopt a own algorithm for better performance
		*/
		wfaTxSleepTime(theProf->profile, theProf->rate, &sleepTime, &throttledRate);
		/*
		* alright, we need to raise the priority level of the process
		* to improve the real-time performance of packet sending.
		* Since this is for tuning purpose, it is optional implementation.
		*/
		//wfaSetProcPriority(60);

		//interval = 1*1000000/theProf->rate ; // in usec;

		// Here assumes it takes 20 usec to send a packet
		throttled_est_cost = throttledRate * 20;  // MUST estimate the cost per ppk
		act_sleep_time = sleepTime - adj_latency - throttled_est_cost;
		if (act_sleep_time <= 0)
			act_sleep_time = sleepTime;

		DPRINT_INFO(WFA_OUT, "sleep time %i act_sleep_time %i\n", sleepTime, act_sleep_time);

		runLoop=1;
#ifndef WIN32
	while (runLoop)
#else
	while ((WaitForSingleObject(send_event,0) != WAIT_OBJECT_0))
#endif		
		{
			counter++;
			/* fill in the counter */
			int2BuffBigEndian(counter, &((tgHeader_t *)packBuf)->hdr[8]);


			/*
			* the following code is only used to slow down
			* over fast traffic flooding the buffer and cause
			* packet drop or the other end not able to receive due to
			* some limitations, purely for experiment purpose.
			* each implementation needs some fine tune to it.
			*/
			if(counter ==1)
			{
#ifndef WIN32
				gettimeofday(&before, NULL);

				before.tv_usec += sleepTime;
				if(before.tv_usec > 1000000)
				{
					before.tv_usec -= 1000000;
					before.tv_sec +=1;
				}
#else
				GetSystemTime(&before);
				before.wMilliseconds +=sleepTime;
				if(before.wMilliseconds > 1000)
				{
					before.wMilliseconds -= 1000;
					before.wMilliseconds += 1;

				}
#endif
			}

			if(throttledRate != 0)
			{
				if(counter%throttledRate == 0)
				{
					// sleep that much time
#ifndef WIN32
					usleep(act_sleep_time);
					gettimeofday(&after, NULL);
					difftime = wfa_itime_diff(&after, &before);
#else
					/* In case of win32 for higher frame rate we are sleeping 
					 * less to meet the required Tx frame rate efficiency.
					 */
					
					if (theProf->rate > HIGH_FRAME_RATE_VAL)
						usleep(act_sleep_time / SLEEP_DENOMINATOR);
					else
						usleep(act_sleep_time);
					GetSystemTime(&after);
					difftime = wfa_Winitime_diff(&before,&after );
#endif
					// burn the rest to absort latency
					if(difftime >0)
						buzz_time(difftime);
#ifndef WIN32
					before.tv_usec += sleepTime;
					if(before.tv_usec > 1000000)
					{
						before.tv_usec -= 1000000;
						before.tv_sec +=1;
					}
				}
			} // otherwise, it floods
#else
					before.wMilliseconds += sleepTime;
					if(before.wMilliseconds > 1000)
					{
						before.wMilliseconds -= 1000;
						before.wSecond +=1;
					}
				}
			} // otherwise, it floods
#endif

			/*
			* Fill the timestamp to the header.
			*/
#ifndef WIN32
			gettimeofday(&stime, NULL);

			int2BuffBigEndian(stime.tv_sec, &((tgHeader_t *)packBuf)->hdr[12]);
			int2BuffBigEndian(stime.tv_usec, &((tgHeader_t *)packBuf)->hdr[16]);
#else
			GetSystemTime(&stime);
			int2BuffBigEndian(stime.wSecond, &((tgHeader_t *)packBuf)->hdr[12]);
			int2BuffBigEndian(stime.wMilliseconds , &((tgHeader_t *)packBuf)->hdr[16]);
#endif

			if(theProf->profile == PROF_FILE_TX_TCP || theProf->profile == PROF_TRANSC_TCP)
				bytesSent =  wfaCtrlSend(mySockfd, (unsigned char*)packBuf, packLen);
			else
				bytesSent = wfaTrafficSendTo(mySockfd, packBuf, packLen, (struct sockaddr *)&toAddr);

			if(bytesSent != -1)
			{
				myStream->stats.txPayloadBytes += bytesSent;
				myStream->stats.txFrames++ ;
			}
			else
			{
#ifndef WIN32
				errsv = errno;
				switch(errsv)
				{
				case EAGAIN:
				case ENOBUFS:
					//DPRINT_INFO(WFA_OUT, "send error\n");
					usleep(50);            
					counter-- ;
					//myStream->stats.txFrames--;

					break;
				case ECONNRESET:
					runLoop = 0;
					break;
				case EPIPE:
					runLoop = 0;
					break;
				default:
					{
						DPRINT_INFO(WFA_OUT, "Packet sent error\n");
					}
				}
#else
				errsv = WSAGetLastError();

				switch(errsv)
				{
				case WSATRY_AGAIN:
				case WSAENOBUFS:
					DPRINT_INFO(WFA_OUT, "send error\n");
					usleep(1);             /* hold for 1 ms */
					counter-- ;
					// myStream->stats.txFrames--;

					break;
				case WSAECONNRESET:
					runLoop = 0;
					break;
				case WSAESHUTDOWN:
					runLoop = 0;
					break;
				default:
					DPRINT_INFO(WFA_OUT, "Packet sent error\n");
					break;
				}
#endif
			}
		}

	/*
	 * lower back to an original level if the process is raised previously
	 * It is optional.
	 */
	//wfaSetProcPriority(30);
	}
	else /* invalid parameters */
	{
		/* encode a TLV for response for "invalid ..." */
		sendResp.status = STATUS_INVALID;
			memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));
		return DONE;
	}

	gtgSend = 0;

	/* free the buffer */
	free(packBuf);

	/* Populate the statistics of the sent response in Send_dutResp . In the case of multiple streams 
	* Send_dutResp buffer will have all the response at the end of the send process of all the streams.
	*/
	sendResp.status = STATUS_COMPLETE;
	sendResp.streamId = myStream->id;
	memcpy(&sendResp.cmdru.stats, &myStream->stats, sizeof(tgStats_t));
	memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));
#ifndef WIN32
	gnumStreams = gnumStreams -1;
	if(IPTVprof == 1) {
		    if(gnumStreams == 0)
		       sem_post(&sem_wmm);

	}
#endif
    return DONE;
}

/* this only sends one packet a time */
int wfaSendShortFile(int mySockfd, int streamid, BYTE *sendBuf, int pksize, BYTE *aRespBuf, int *aRespLen)
{
	BYTE *packBuf = sendBuf;
	struct sockaddr_in toAddr;
	tgProfile_t *theProf;
	tgStream_t *myStream;
	int packLen, bytesSent=-1;
	dutCmdResponse_t sendResp;
	int errsv;
	DPRINT_INFO(WFA_OUT, "---------SendShortFile----------:%d\r\n", mySockfd);
	if(mySockfd == -1)
	{
		/* stop */
		gtgTransac = 0;
		gtimeOut = 0;
		gtgRecv = 0;
		gtgSend = 0;
		DPRINT_INFO(WFA_OUT, "stop short traffic\n");

		myStream = findStreamProfile(streamid);
		if(myStream != NULL)
		{
			sendResp.status = STATUS_COMPLETE;
			sendResp.streamId = streamid;
			memcpy(&sendResp.cmdru.stats, &myStream->stats, sizeof(tgStats_t));
			memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));

		}

		return DONE;
	}

	/* find the profile */
	myStream = findStreamProfile(streamid);

	theProf = &myStream->profile;
	if(theProf == NULL) {
		return FALSE;
	}

	if(pksize == 0)
		packLen = theProf->pksize;
	else
		packLen = pksize;

	memset(&toAddr, 0, sizeof(toAddr));
	toAddr.sin_family = AF_INET;
	toAddr.sin_addr.s_addr = inet_addr(theProf->sipaddr);
	toAddr.sin_port = htons(theProf->sport);

	if(gtgRecv && gtgTransac)
	{
		toAddr.sin_addr.s_addr = inet_addr(theProf->sipaddr);
		toAddr.sin_port = htons(theProf->sport);
	}
	else if(gtgSend && gtgTransac)
	{
		toAddr.sin_addr.s_addr = inet_addr(theProf->dipaddr);
		toAddr.sin_port = htons(theProf->dport);
	}

	int2BuffBigEndian(myStream->stats.txFrames, &((tgHeader_t *)packBuf)->hdr[8]);

	if(mySockfd != -1)
	{
		if(theProf->profile == PROF_FILE_TX_TCP || theProf->profile == PROF_TRANSC_TCP)
			bytesSent = wfaCtrlSend(mySockfd, (unsigned char*)packBuf, packLen);
		else
			bytesSent = wfaTrafficSendTo(mySockfd, (char *)packBuf, packLen, (struct sockaddr *)&toAddr);
	}


	if(bytesSent > 0)
	{
		myStream->stats.txFrames++;
		myStream->stats.txPayloadBytes += bytesSent;
	}
	else if(bytesSent == -1)
	{
#ifndef WIN32
		errsv = errno;
		switch(errsv)
		{
		case EAGAIN:
		case ENOBUFS:
			DPRINT_ERR(WFA_ERR, "send error\n");
			usleep(1000);             /* hold for 1 ms */
			// myStream->stats.txFrames--;
			break;
		default:
			break;
		}
#else
		errsv = WSAGetLastError();
		switch(errsv)
		{
		case WSATRY_AGAIN:
		case WSAENOBUFS:
			usleep(1);             /* hold for 1 ms */
			//	myStream->stats.txFrames--;
			break;
		default:
			DPRINT_INFO(WFA_OUT, "sendto: ");
			DPRINT_ERR(WFA_ERR, "send error\n");
			break;
		}

#endif
	}
	sentTranPkts++;
	DPRINT_INFO(WFA_OUT, "SendShortFile: sentTranPkts = %d\r\n",sentTranPkts);
	return DONE;
}

/* In this function we always receive from a specified IP address and Port. We change the receive
 * socket from blocking to non-blocking */
int wfaRecvFile(int mySockfd, int streamid, char *recvBuf)
{
	/* how many packets are received */
	char *packBuf = recvBuf;
	struct sockaddr_in fromAddr;
	tgProfile_t *theProf;
	tgStream_t *myStream;
	int bytesRecvd;
#ifndef WIN32
	int ioflags;
#endif
	int lostPkts;

	/* find the profile */
	myStream = findStreamProfile(streamid);

	theProf = &myStream->profile;
	if(theProf == NULL)
	{
		return FALSE;
	}

	memset(packBuf, 0, MAX_UDP_LEN);

	memset(&fromAddr, 0, sizeof(fromAddr));
	fromAddr.sin_family = AF_INET;
	fromAddr.sin_addr.s_addr = inet_addr(theProf->dipaddr);
	fromAddr.sin_port = htons(theProf->dport);

	if(gtgRecv && gtgTransac)
	{
		fromAddr.sin_addr.s_addr = inet_addr(theProf->sipaddr);
		fromAddr.sin_port = htons(theProf->sport);
	}
	else if(gtgSend && gtgTransac)
	{
		fromAddr.sin_addr.s_addr = inet_addr(theProf->dipaddr);
		fromAddr.sin_port = htons(theProf->dport);
	}

	/* get current flags setting */
#ifndef WIN32
	ioflags = fcntl(mySockfd, F_GETFL, 0);

	/* set only BLOCKING flag to non-blocking */
	fcntl(mySockfd, F_SETFL, ioflags | O_NONBLOCK);

#endif

	/* it is always to receive at least one packet, in case more in the
	queue, just pick them up.
	*/
	if(theProf->profile == PROF_FILE_TX_TCP || theProf->profile == PROF_TRANSC_TCP)
		bytesRecvd = wfaCtrlRecv(mySockfd, (unsigned char*)packBuf);
	else
		bytesRecvd = wfaTrafficRecv(mySockfd, packBuf, (struct sockaddr *)&fromAddr);

	if(bytesRecvd > 0)
	{
		myStream->stats.rxFrames++;
		myStream->stats.rxPayloadBytes +=bytesRecvd;
#ifdef WIN32
		/* 
		 * This sleep is added to avoid driver crash at Dut side when TG sends
		 * traffic at unlimited frame rate for longer duration
		 */
		if (myStream->stats.rxFrames % 20 == 0)
			usleep(1);
#endif
		/*
		*  Get the lost packet count
		*/
		lostPkts =bigEndianBuff2Int(&((tgHeader_t *)packBuf)->hdr[8]) - 1 - myStream->lastPktSN;
		myStream->stats.lostPkts += lostPkts;
		myStream->lastPktSN = bigEndianBuff2Int(&((tgHeader_t *)packBuf)->hdr[8]);
	}
	return (bytesRecvd);
}

/* This is going to be a blocking SEND till it finishes 
 * The code is optimized for to achieve higher through put
 * by using hardcoded header buffers
 */
int wfaImprovePerfSendLongFile(int mySockfd, int streamid, BYTE *aRespBuf, int *aRespLen)
{
	tgProfile_t           *theProf = NULL;
	tgStream_t            *myStream = NULL;
	struct sockaddr_in    toAddr;
	char                  *packBuf;
	int  packLen;
	int  bytesSent;
	dutCmdResponse_t sendResp;
	int errsv;
#ifdef WIN32
	SYSTEMTIME stime;
#else
	struct timeval stime;
#endif

	int counter = 0;

	/* find the profile */
	myStream = findStreamProfile(streamid);
	if(myStream == NULL)
	{
		return FALSE;
	}

	theProf = &myStream->profile;

	if(theProf == NULL || theProf->duration == 0) /* invalid parameters */
	{
		/* encode a TLV for response for "invalid ..." */
		sendResp.status = STATUS_INVALID;
		memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));
		return DONE;
	}

	packLen = theProf->pksize;

	/* allocate a buf */
	packBuf = (char *)malloc(packLen);
	memset(packBuf, 1, packLen);

	/* fill in the header */
	strncpy(packBuf, "1345678", sizeof(tgHeader_t));

	/* initialize the destination address */
	memset(&toAddr, 0, sizeof(toAddr));
	toAddr.sin_family = AF_INET;
	toAddr.sin_addr.s_addr = inet_addr(theProf->dipaddr);
	toAddr.sin_port = htons(theProf->dport);

	/* if a frame rate and duration are defined, then we know
	* interval for each packet and how many packets it needs to
	* send.
	*/

	runLoop=1;
	/*
	* Fill the hardcoded timestamp to the header.
	*/
#ifndef WIN32
	gettimeofday(&stime, NULL);
	int2BuffBigEndian(stime.tv_sec, &((tgHeader_t *)packBuf)->hdr[12]);
	int2BuffBigEndian(stime.tv_usec, &((tgHeader_t *)packBuf)->hdr[16]);
#else
	GetSystemTime(&stime);
	int2BuffBigEndian(stime.wSecond, &((tgHeader_t *)packBuf)->hdr[12]);
	int2BuffBigEndian(stime.wMilliseconds , &((tgHeader_t *)packBuf)->hdr[16]);
#endif

#ifndef WIN32
	while (runLoop)
#else
	while ((WaitForSingleObject(send_event,0) != WAIT_OBJECT_0))
#endif
	{
		counter++;
		/* fill in the counter */
		int2BuffBigEndian(counter, &((tgHeader_t *)packBuf)->hdr[8]);
		/*
		* the following code is only used to slow down
		* over fast traffic flooding the buffer and cause
		* packet drop or the other end not able to receive due to
		* some limitations, purely for experiment purpose.
		* each implementation needs some fine tune to it.
		*/
		if(theProf->profile == PROF_FILE_TX_TCP || theProf->profile == PROF_TRANSC_TCP)
			bytesSent =  wfaCtrlSend(mySockfd, (unsigned char*)packBuf, packLen);
		else
			bytesSent = wfaTrafficSendTo(mySockfd, packBuf, packLen, (struct sockaddr *)&toAddr);

		if(bytesSent > 0)
		{
			myStream->stats.txPayloadBytes += bytesSent;
			myStream->stats.txFrames++ ;
		}
		else if(bytesSent == -1)
		{
#ifndef WIN32
			errsv = errno;
			switch(errsv)
			{
			case EAGAIN:
			case ENOBUFS:
				//DPRINT_INFO(WFA_OUT, "send error\n");
				usleep(50);            
				counter-- ;
				//myStream->stats.txFrames--;

				break;
			case ECONNRESET:
				runLoop = 0;
				break;
			case EPIPE:
				runLoop = 0;
				break;
			default:
				{
					DPRINT_INFO(WFA_OUT, "Packet sent error\n");
				}
			}
#else
			errsv = WSAGetLastError();

			switch(errsv)
			{
			case WSATRY_AGAIN:
			case WSAENOBUFS:
				DPRINT_INFO(WFA_OUT, "send error\n");
				usleep(1);             /* hold for 1 ms */
				counter-- ;
				break;
			case WSAECONNRESET:
				runLoop = 0;
				break;
			case WSAESHUTDOWN:
				runLoop = 0;
				break;
			default:
				DPRINT_INFO(WFA_OUT, "Packet sent error\n");
				break;
			}
#endif
		}
#ifdef WIN32
		/* In case of win32 we are sleeping after every 20 frame sent.
		 * This is to avoid driver hang in case of windows mobile
		 */
		if (myStream->stats.txFrames % 20 == 0)
			usleep(1);
#endif
	}
	gtgSend = 0;

	/* free the buffer */
	free(packBuf);

	/* Populate the statistics of the sent response in Send_dutResp . In the case of multiple streams 
	* Send_dutResp buffer will have all the response at the end of the send process of all the streams.
	*/
	sendResp.status = STATUS_COMPLETE;
	sendResp.streamId = myStream->id;
	memcpy(&sendResp.cmdru.stats, &myStream->stats, sizeof(tgStats_t));
	memcpy(Send_dutResp , (BYTE*)&sendResp, sizeof(dutCmdResponse_t));

#ifndef WIN32
	gnumStreams = gnumStreams -1;
	if(IPTVprof == 1) {
		    if(gnumStreams == 0)
		       sem_post(&sem_wmm);

	}
#endif
	return DONE;
}

#ifdef WIN32
DWORD Win32_tmout_stop_send(LPVOID num )
{
	int i;

	Sleep((DWORD)num);
	DPRINT_INFO(WFA_OUT,  "timer fired, stop sending traffic\n");
	/*
	*  After runLoop reset, all sendLong will stop
	*/
	runLoop = 0;
	/*Reset to stop sending the short file*/
	gTransactrunLoop = 0; 
	/*
	* Decrement the usedThread everytime the timeout function is called .
	*/
	--usedThread ;

	if(usedThread ==0 && IPTVprof == 1) {
		asd_sleep(1);
		/* Set the event when there are no more streams to send the traffic */
		if(SetEvent(send_event)== 0 ){
			DPRINT_INFO(WFA_OUT, "SetEvent failure %d \n", GetLastError());
		}
		/*
		 * all WMM streams also stop
		 */
		for(i=0; i<WFA_TRAFFIC_CLASS_NUM; i++)
		{
			if(g_TGSndThr[i] != NULL){
				CloseHandle(g_TGSndThr[i]);
				g_TGSndThr[i] = NULL;
			}	
		}
	}
	/*
	* once the stream table slot count is reset, it implies that the test
	* is done. When the next set profile command comes in, it will reset/clean
	* the stream table.
	*/
	slotCnt = 0;

	/*
	* The test is for DT3 transaction test.
	* Timeout to stop it.
	*/
	if(gtgTransac != 0)
	{
		gtgTransac = 0;
		gtgSend = 0;
		gtimeOut = 0;
		gRegSec = 1;
		gtgRecv = 0;
	}

	return 0;
}

#endif