blob: a352ed30cd7025fb9047a519ff76e60ce4095603 [file] [log] [blame]
STMicroelectronics stih4xx platforms
- sti-vtg: video timing generator
Required properties:
- compatible: "st,vtg"
- reg: Physical base address of the IP registers and length of memory mapped region.
Optional properties:
- interrupts : VTG interrupt number to the CPU.
- st,slave: phandle on a slave vtg
- sti-vtac: video timing advanced inter dye communication Rx and TX
Required properties:
- compatible: "st,vtac-main" or "st,vtac-aux"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- sti-display-subsystem: Master device for DRM sub-components
This device must be the parent of all the sub-components and is responsible
of bind them.
Required properties:
- compatible: "st,sti-display-subsystem"
- ranges: to allow probing of subdevices
- sti-compositor: frame compositor engine
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-compositor"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- st,vtg: phandle(s) on vtg device (main and aux) nodes.
- sti-tvout: video out hardware block
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-tvout"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- sti-hdmi: hdmi output block
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-hdmi";
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- interrupts : HDMI interrupt number to the CPU.
- interrupt-names: names of the interrupts listed in interrupts property in
the same order
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
- clock-names: names of the clocks listed in clocks property in the same
order.
- ddc: phandle of an I2C controller used for DDC EDID probing
sti-hda:
Required properties:
must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-hda"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
sti-dvo:
Required properties:
must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-dvo"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- pinctrl-0: pin control handle
- pinctrl-names: names of the pin control states to use
- sti,panel: phandle of the panel connected to the DVO output
sti-hqvdp:
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-hqvdp"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- st,vtg: phandle on vtg main device node.
Example:
/ {
...
vtg_main_slave: sti-vtg-main-slave@fe85A800 {
compatible = "st,vtg";
reg = <0xfe85A800 0x300>;
interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
};
vtg_main: sti-vtg-main-master@fd348000 {
compatible = "st,vtg";
reg = <0xfd348000 0x400>;
st,slave = <&vtg_main_slave>;
};
vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
compatible = "st,vtg";
reg = <0xfe858200 0x300>;
interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
};
vtg_aux: sti-vtg-aux-master@fd348400 {
compatible = "st,vtg";
reg = <0xfd348400 0x400>;
st,slave = <&vtg_aux_slave>;
};
sti-vtac-rx-main@fee82800 {
compatible = "st,vtac-main";
reg = <0xfee82800 0x200>;
clock-names = "vtac";
clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
};
sti-vtac-rx-aux@fee82a00 {
compatible = "st,vtac-aux";
reg = <0xfee82a00 0x200>;
clock-names = "vtac";
clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
};
sti-vtac-tx-main@fd349000 {
compatible = "st,vtac-main";
reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
clock-names = "vtac";
clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
};
sti-vtac-tx-aux@fd349200 {
compatible = "st,vtac-aux";
reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
clock-names = "vtac";
clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
};
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
ranges;
sti-compositor@fd340000 {
compatible = "st,stih416-compositor";
reg = <0xfd340000 0x1000>;
clock-names = "compo_main", "compo_aux",
"pix_main", "pix_aux";
clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
<&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
reset-names = "compo-main", "compo-aux";
resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
st,vtg = <&vtg_main>, <&vtg_aux>;
};
sti-tvout@fe000000 {
compatible = "st,stih416-tvout";
reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
reg-names = "tvout-reg", "hda-reg", "syscfg";
reset-names = "tvout";
resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
};
sti-hdmi@fe85c000 {
compatible = "st,stih416-hdmi";
reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
reg-names = "hdmi-reg", "syscfg";
interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix", "tmds", "phy", "audio";
clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
};
sti-hda@fe85a000 {
compatible = "st,stih416-hda";
reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix", "hddac";
clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
};
sti-dvo@8d00400 {
compatible = "st,stih407-dvo";
reg = <0x8d00400 0x200>;
reg-names = "dvo-reg";
clock-names = "dvo_pix", "dvo",
"main_parent", "aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
<&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvo>;
sti,panel = <&panel_dvo>;
};
sti-hqvdp@9c000000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
reset-names = "hqvdp";
resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
st,vtg = <&vtg_main>;
};
};
...
};