blob: 555fb117d4facd8dc8e7b60c84500d873b44f1cd [file] [log] [blame]
* Freescale MXS LRADC device driver
Required properties:
- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
for i.MX28 SoC
- reg: Address and length of the register set for the device
- interrupts: Should contain the LRADC interrupts
Optional properties:
- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
to LRADC. Valid value is either 4 or 5. If this
property is not present, then the touchscreen is
disabled. 5 wires is valid for i.MX28 SoC only.
- fsl,ave-ctrl: number of samples per direction to calculate an average value.
Allowed value is 1 ... 32, default is 4
- fsl,ave-delay: delay between consecutive samples. Allowed value is
2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
2 kHz and its default is 2 (= 1 ms)
- fsl,settling: delay between plate switch to next sample. Allowed value is
1 ... 2047. It counts at 2 kHz and its default is
10 (= 5 ms)
Example for i.MX23 SoC:
lradc@80050000 {
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;
fsl,settling = <10>;
};
Example for i.MX28 SoC:
lradc@80050000 {
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
status = "okay";
fsl,lradc-touchscreen-wires = <5>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;
fsl,settling = <10>;
};