blob: 54e7e70bcea52da324caf4f6c277573cca91f823 [file] [log] [blame]
HopeRF HP03 digital pressure/temperature sensors
Required properties:
- compatible: must be "hoperf,hp03"
- xclr-gpio: must be device tree identifier of the XCLR pin.
The XCLR pin is a reset of the ADC in the chip,
it must be pulled HI before the conversion and
readout of the value from the ADC registers and
pulled LO afterward.
Example:
hp03@0x77 {
compatible = "hoperf,hp03";
reg = <0x77>;
xclr-gpio = <&portc 0 0x0>;
};