blob: 4bd10dd881b8324d86dbbed31005be81a4f52fa9 [file] [log] [blame]
OMAP2+ IOMMU
Required properties:
- compatible : Should be one of,
"ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
"ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
"ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances
"ti,dra7-iommu" for DRA7xx IOMMU instances
- ti,hwmods : Name of the hwmod associated with the IOMMU instance
- reg : Address space for the configuration registers
- interrupts : Interrupt specifier for the IOMMU instance
- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices,
and needs no additional data in the pargs specifier. Please
also refer to the generic bindings document for more info
on this property,
Documentation/devicetree/bindings/iommu/iommu.txt
Optional properties:
- ti,#tlb-entries : Number of entries in the translation look-aside buffer.
Should be either 8 or 32 (default: 32)
- ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
back a bus error response on MMU faults.
- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM
syscon node that contains the additional control
register for enabling the MMU, and the MMU instance
number (0-indexed) within the sub-system. This property
is required for DSP IOMMU instances on DRA7xx SoCs. The
instance number should be 0 for DSP MDMA MMUs and 1 for
DSP EDMA MMUs.
Example:
/* OMAP3 ISP MMU */
mmu_isp: mmu@480bd400 {
#iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
ti,hwmods = "mmu_isp";
ti,#tlb-entries = <8>;
};
/* DRA74x DSP2 MMUs */
mmu0_dsp2: mmu@41501000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x41501000 0x100>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu0_dsp2";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp2_system 0x0>;
};
mmu1_dsp2: mmu@41502000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x41502000 0x100>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu1_dsp2";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp2_system 0x1>;
};