blob: f95b6260a3b3d148570a06e7a5e08d9659794661 [file] [log] [blame]
* Marvell MVEBU SATA PHY
Power control for the SATA phy found on Marvell MVEBU SoCs.
This document extends the binding described in phy-bindings.txt
Required properties :
- reg : Offset and length of the register set for the SATA device
- compatible : Should be "marvell,mvebu-sata-phy"
- clocks : phandle of clock and specifier that supplies the device
- clock-names : Should be "sata"
Example:
sata-phy@84000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0x84000 0x0334>;
clocks = <&gate_clk 15>;
clock-names = "sata";
#phy-cells = <0>;
status = "ok";
};
Armada 375 USB cluster
----------------------
Armada 375 comes with an USB2 host and device controller and an USB3
controller. The USB cluster control register allows to manage common
features of both USB controllers.
Required properties:
- compatible: "marvell,armada-375-usb-cluster"
- reg: Should contain usb cluster register location and length.
- #phy-cells : from the generic phy bindings, must be 1. Possible
values are 1 (USB2), 2 (USB3).
Example:
usbcluster: usb-cluster@18400 {
compatible = "marvell,armada-375-usb-cluster";
reg = <0x18400 0x4>;
#phy-cells = <1>
};