blob: e3f99692040365fe16c6cb0fd35bdf1a8c1b75f0 [file] [log] [blame]
Broadcom Kona Family CPU Enable Method
--------------------------------------
This binding defines the enable method used for starting secondary
CPUs in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
The enable method is specified by defining the following required
properties in the "cpu" device tree node:
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <...>;
The secondary-boot-reg property is a u32 value that specifies the
physical address of the register used to request the ROM holding pen
code release a secondary CPU. The value written to the register is
formed by encoding the target CPU id into the low bits of the
physical start address it should jump to.
Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
enable-method = "brcm,bcm11351-cpu-method";
secondary-boot-reg = <0x3500417c>;
};
};