blob: 7a837d2182acf74e0104b4da227cc2a4715d7504 [file] [log] [blame]
Broadcom BCM2835 auxiliary peripheral support
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
area controlling clock gating to the peripherals, and providing an IRQ
status register.
Required properties:
- compatible: Should be "brcm,bcm2835-aux"
- #clock-cells: Should be <1>. The permitted clock-specifier values can be
found in include/dt-bindings/clock/bcm2835-aux.h
- reg: Specifies base physical address and size of the registers
- clocks: The parent clock phandle
Example:
clocks: cprman@7e101000 {
compatible = "brcm,bcm2835-cprman";
#clock-cells = <1>;
reg = <0x7e101000 0x2000>;
clocks = <&clk_osc>;
};
aux: aux@0x7e215004 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
};