blob: be57550e14e487a797c62b485870d9a728d5c731 [file] [log] [blame]
* ARM SMMUv3 Architecture Implementation
The SMMUv3 architecture is a significant departure from previous
revisions, replacing the MMIO register interface with in-memory command
and event queues and adding support for the ATS and PRI components of
the PCIe specification.
** SMMUv3 required properties:
- compatible : Should include:
* "arm,smmu-v3" for any SMMUv3 compliant
implementation. This entry should be last in the
compatible list.
- reg : Base address and size of the SMMU.
- interrupts : Non-secure interrupt list describing the wired
interrupt sources corresponding to entries in
interrupt-names. If no wired interrupts are
present then this property may be omitted.
- interrupt-names : When the interrupts property is present, should
include the following:
* "eventq" - Event Queue not empty
* "priq" - PRI Queue not empty
* "cmdq-sync" - CMD_SYNC complete
* "gerror" - Global Error activated
- #iommu-cells : See the generic IOMMU binding described in
devicetree/bindings/pci/pci-iommu.txt
for details. For SMMUv3, must be 1, with each cell
describing a single stream ID. All possible stream
IDs which a device may emit must be described.
** SMMUv3 optional properties:
- dma-coherent : Present if DMA operations made by the SMMU (page
table walks, stream table accesses etc) are cache
coherent with the CPU.
NOTE: this only applies to the SMMU itself, not
masters connected upstream of the SMMU.
- msi-parent : See the generic MSI binding described in
devicetree/bindings/interrupt-controller/msi.txt
for a description of the msi-parent property.
- hisilicon,broken-prefetch-cmd
: Avoid sending CMD_PREFETCH_* commands to the SMMU.
** Example
smmu@2b400000 {
compatible = "arm,smmu-v3";
reg = <0x0 0x2b400000 0x0 0x20000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
dma-coherent;
#iommu-cells = <1>;
msi-parent = <&its 0xff0000>;
};