blob: 5224bf05f6f8b36e5c78cabd7b83ec60c1b9e849 [file] [log] [blame]
Davicom DM9000 Fast Ethernet controller
Required properties:
- compatible = "davicom,dm9000";
- reg : physical addresses and sizes of registers, must contain 2 entries:
first entry : address register,
second entry : data register.
- interrupt-parent : interrupt controller to which the device is connected
- interrupts : interrupt specifier specific to interrupt controller
Optional properties:
- davicom,no-eeprom : Configuration EEPROM is not available
- davicom,ext-phy : Use external PHY
- reset-gpios : phandle of gpio that will be used to reset chip during probe
- vcc-supply : phandle of regulator that will be used to enable power to chip
Example:
ethernet@18000000 {
compatible = "davicom,dm9000";
reg = <0x18000000 0x2 0x18000004 0x2>;
interrupt-parent = <&gpn>;
interrupts = <7 4>;
local-mac-address = [00 00 de ad be ef];
davicom,no-eeprom;
reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
vcc-supply = <&eth0_power>;
};