blob: bae3c7f838cf710d890480c9b139d096fa98524c [file] [log] [blame] [edit]
Binding for Samsung S2MPA01 regulator block
===========================================
This is a part of device tree bindings for S2M family multi-function devices.
More information can be found in bindings/mfd/sec-core.txt file.
The S2MPA01 device provide buck and LDO regulators.
To register these with regulator framework instantiate under main device node
a sub-node named "regulators" with more sub-nodes for each regulator using the
common regulator binding documented in:
- Documentation/devicetree/bindings/regulator/regulator.txt
Names of regulators supported by S2MPA01 device:
- LDOn
- valid values for n are 1 to 26
- Example: LDO1, LD02, LDO26
- BUCKn
- valid values for n are 1 to 10.
- Example: BUCK1, BUCK2, BUCK9
Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
as per the datasheet of device.
Optional properties of buck regulator nodes under "regulators" sub-node:
- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
(default), 25000, or 50000. May be 0 for disabling the ramp delay on
BUCK{1,2,3,4}.
In the absence of the regulator-ramp-delay property, the default ramp
delay will be used.
Note: Some bucks share the ramp rate setting i.e. same ramp value
will be set for a particular group of bucks so provide the same
regulator-ramp-delay value for them.
Groups sharing ramp rate:
- buck{1,6},
- buck{2,4},
- buck{8,9,10}.
Example:
s2mpa01_pmic@66 {
compatible = "samsung,s2mpa01-pmic";
reg = <0x66>;
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo2_reg: LDO2 {
regulator-name = "VDDQ_MMC2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <50000>;
};
};
};