blob: aab9a81f7e137306d14b2a3e3b2e149d0d45d3bb [file] [log] [blame]
Imagination Technologies SPDIF Input Controller
Required Properties:
- compatible : Compatible list, must contain "img,spdif-in"
- #sound-dai-cells : Must be equal to 0
- reg : Offset and length of the register set for the device
- dmas: Contains an entry for each entry in dma-names.
- dma-names: Must include the following entry:
"rx"
- clocks : Contains an entry for each entry in clock-names
- clock-names : Includes the following entries:
"sys" The system clock
Optional Properties:
- resets: Should contain a phandle to the spdif in reset signal, if any
- reset-names: Should contain the reset signal name "rst", if a
reset phandle is given
- interrupts : Contains the spdif in interrupt, if present
Example:
spdif_in: spdif-in@18100E00 {
compatible = "img,spdif-in";
reg = <0x18100E00 0x100>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdc 15 0xffffffff 0>;
dma-names = "rx";
clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
clock-names = "sys";
#sound-dai-cells = <0>;
};