| Qualcomm adreno/snapdragon hdmi output |
| |
| Required properties: |
| - compatible: one of the following |
| * "qcom,hdmi-tx-8084" |
| * "qcom,hdmi-tx-8074" |
| * "qcom,hdmi-tx-8660" |
| * "qcom,hdmi-tx-8960" |
| - reg: Physical base address and length of the controller's registers |
| - reg-names: "core_physical" |
| - interrupts: The interrupt signal from the hdmi block. |
| - clocks: device clocks |
| See ../clocks/clock-bindings.txt for details. |
| - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin |
| - qcom,hdmi-tx-ddc-data-gpio: ddc data pin |
| - qcom,hdmi-tx-hpd-gpio: hpd pin |
| - core-vdda-supply: phandle to supply regulator |
| - hdmi-mux-supply: phandle to mux regulator |
| |
| Optional properties: |
| - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin |
| - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin |
| |
| Example: |
| |
| / { |
| ... |
| |
| hdmi: qcom,hdmi-tx-8960@4a00000 { |
| compatible = "qcom,hdmi-tx-8960"; |
| reg-names = "core_physical"; |
| reg = <0x04a00000 0x1000>; |
| interrupts = <GIC_SPI 79 0>; |
| clock-names = |
| "core_clk", |
| "master_iface_clk", |
| "slave_iface_clk"; |
| clocks = |
| <&mmcc HDMI_APP_CLK>, |
| <&mmcc HDMI_M_AHB_CLK>, |
| <&mmcc HDMI_S_AHB_CLK>; |
| qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; |
| qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; |
| qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; |
| core-vdda-supply = <&pm8921_hdmi_mvs>; |
| hdmi-mux-supply = <&ext_3p3v>; |
| }; |
| }; |
