blob: dc71754a56afe52715b086dbd5d416391918ede2 [file] [log] [blame]
Qualcomm Universal Peripheral (QUP) I2C controller
Required properties:
- compatible: Should be:
* "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
* "qcom,i2c-qup-v2.1.1" for 8974 v1.
* "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- reg: Should contain QUP register address and length.
- interrupts: Should contain I2C interrupt.
- clocks: A list of phandles + clock-specifiers, one for each entry in
clock-names.
- clock-names: Should contain:
* "core" for the core clock
* "iface" for the AHB clock
- #address-cells: Should be <1> Address cells for i2c device address
- #size-cells: Should be <0> as i2c addresses have no size component
Optional properties:
- clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
defaults to 100kHz if omitted.
Child nodes should conform to i2c bus binding.
Example:
i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x1000>;
interrupts = <0 96 0>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <355000>;
#address-cells = <1>;
#size-cells = <0>;
};