| Applied Micro X-Gene SoC DMA nodes | |
| DMA nodes are defined to describe on-chip DMA interfaces in | |
| APM X-Gene SoC. | |
| Required properties for DMA interfaces: | |
| - compatible: Should be "apm,xgene-dma". | |
| - device_type: set to "dma". | |
| - reg: Address and length of the register set for the device. | |
| It contains the information of registers in the following order: | |
| 1st - DMA control and status register address space. | |
| 2nd - Descriptor ring control and status register address space. | |
| 3rd - Descriptor ring command register address space. | |
| 4th - Soc efuse register address space. | |
| - interrupts: DMA has 5 interrupts sources. 1st interrupt is | |
| DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts | |
| are completion interrupts for each DMA channels. | |
| - clocks: Reference to the clock entry. | |
| Optional properties: | |
| - dma-coherent : Present if dma operations are coherent | |
| Example: | |
| dmaclk: dmaclk@1f27c000 { | |
| compatible = "apm,xgene-device-clock"; | |
| #clock-cells = <1>; | |
| clocks = <&socplldiv2 0>; | |
| reg = <0x0 0x1f27c000 0x0 0x1000>; | |
| reg-names = "csr-reg"; | |
| clock-output-names = "dmaclk"; | |
| }; | |
| dma: dma@1f270000 { | |
| compatible = "apm,xgene-storm-dma"; | |
| device_type = "dma"; | |
| reg = <0x0 0x1f270000 0x0 0x10000>, | |
| <0x0 0x1f200000 0x0 0x10000>, | |
| <0x0 0x1b008000 0x0 0x2000>, | |
| <0x0 0x1054a000 0x0 0x100>; | |
| interrupts = <0x0 0x82 0x4>, | |
| <0x0 0xb8 0x4>, | |
| <0x0 0xb9 0x4>, | |
| <0x0 0xba 0x4>, | |
| <0x0 0xbb 0x4>; | |
| dma-coherent; | |
| clocks = <&dmaclk 0>; | |
| }; |