blob: 67d0a58dbb778cbaa0619132899c77c72451099a [file] [log] [blame]
Qualcomm adreno/snapdragon GPU
Required properties:
- compatible: "qcom,adreno-3xx"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
* "mem_iface_clk"
- qcom,chipid: gpu chip-id. Note this may become optional for future
devices if we can reliably read the chipid from hw
- qcom,gpu-pwrlevels: list of operating points
- compatible: "qcom,gpu-pwrlevels"
- for each qcom,gpu-pwrlevel:
- qcom,gpu-freq: requested gpu clock speed
- NOTE: downstream android driver defines additional parameters to
configure memory bandwidth scaling per OPP.
Example:
/ {
...
gpu: qcom,kgsl-3d0@4300000 {
compatible = "qcom,adreno-3xx";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 80 0>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
"core_clk",
"iface_clk",
"mem_iface_clk";
clocks =
<&mmcc GFX3D_CLK>,
<&mmcc GFX3D_AHB_CLK>,
<&mmcc MMSS_IMEM_AHB_CLK>;
qcom,chipid = <0x03020100>;
qcom,gpu-pwrlevels {
compatible = "qcom,gpu-pwrlevels";
qcom,gpu-pwrlevel@0 {
qcom,gpu-freq = <450000000>;
};
qcom,gpu-pwrlevel@1 {
qcom,gpu-freq = <27000000>;
};
};
};
};