blob: 5fc03134a9996473e4fe3ce1cd895b49da5b96f1 [file] [log] [blame]
Marvell Armada 370, 375, 38x, XP Interrupt Controller
Required properties:
- compatible: Should be "marvell,mpic"
- interrupt-controller: Identifies the node as an interrupt controller.
- msi-controller: Identifies the node as an PCI Message Signaled
Interrupt controller.
- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
The cell is the IRQ number
- reg: Should contain PMIC registers location and length. First pair
for the main interrupt registers, second pair for the per-CPU
interrupt registers. For this last pair, to be compliant with SMP
support, the "virtual" must be use (For the record, these registers
automatically map to the interrupt controller registers of the
current CPU)
Optional properties:
- interrupts: If defined, then it indicates that this MPIC is
connected as a slave to another interrupt controller. This is
typically the case on Armada 375 and Armada 38x, where the MPIC is
connected as a slave to the Cortex-A9 GIC. The provided interrupt
indicate to which GIC interrupt the MPIC output is connected.
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd0020a00 0x1d0>,
<0xd0021070 0x58>;