blob: be51a15e05f926913b3a473648d977b25f1a2fbc [file] [log] [blame]
-------------------------------
BCM590xx Power Management Units
-------------------------------
Required properties:
- compatible: "brcm,bcm59056"
- reg: I2C slave address
- interrupts: interrupt for the PMU. Generic interrupt client node bindings
are described in interrupt-controller/interrupts.txt
------------------
Voltage Regulators
------------------
Optional child nodes:
- regulators: container node for regulators following the generic
regulator binding in regulator/regulator.txt
The valid regulator node names for BCM59056 are:
rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
vbus
Example:
pmu: bcm59056@8 {
compatible = "brcm,bcm59056";
reg = <0x08>;
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
regulators {
rfldo_reg: rfldo {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
};
...
};
};