blob: fc149f326dae11dec31a892ddda4f021e92a9db1 [file] [log] [blame]
MIPS CPU interrupt controller
On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
IRQs from a devicetree file and create a irq_domain for IRQ controller.
With the irq_domain in place we can describe how the 8 IRQs are wired to the
platforms internal interrupt controller cascade.
Below is an example of a platform describing the cascade inside the devicetree
and the code used to load it inside arch_init_irq().
Required properties:
- compatible : Should be "mti,cpu-interrupt-controller"
Example devicetree:
cpu-irq: cpu-irq@0 {
#address-cells = <0>;
interrupt-controller;
#interrupt-cells = <1>;
compatible = "mti,cpu-interrupt-controller";
};
intc: intc@200 {
compatible = "ralink,rt2880-intc";
reg = <0x200 0x100>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu-irq>;
interrupts = <2>;
};
Example platform irq.c:
static struct of_device_id __initdata of_irq_ids[] = {
{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
{},
};
void __init arch_init_irq(void)
{
of_irq_init(of_irq_ids);
}