blob: 0e5e2ec4001dda10fe1b35b57d8ecbe976febf0a [file] [log] [blame]
MMC/SD/SDIO slot directly connected to a SPI bus
This file documents differences between the core properties described
by mmc.txt and the properties used by the mmc_spi driver.
Required properties:
- spi-max-frequency : maximum frequency for this device (Hz).
- voltage-ranges : two cells are required, first cell specifies minimum
slot voltage (mV), second cell specifies maximum slot voltage (mV).
Several ranges could be specified.
Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO. Note that this does not follow the
binding from mmc.txt, for historical reasons.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
mmc-slot@0 {
compatible = "fsl,mpc8323rdb-mmc-slot",
reg = <0>;
gpios = <&qe_pio_d 14 1
&qe_pio_d 15 0>;
voltage-ranges = <3300 3300>;
spi-max-frequency = <50000000>;
interrupts = <42>;
interrupt-parent = <&PIC>;