blob: 002d8440bf66f6a00054895b75c47e724cbcd5b9 [file] [log] [blame]
Renesas R-Car CAN controller Device Tree Bindings
-------------------------------------------------
Required properties:
- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
"renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
"renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
- reg: physical base address and size of the R-Car CAN register map.
- interrupts: interrupt specifier for the sole interrupt.
- clocks: phandles and clock specifiers for 3 CAN clock inputs.
- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
Optional properties:
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
<0x0> (default) : Peripheral clock (clkp1)
<0x1> : Peripheral clock (clkp2)
<0x3> : Externally input clock
Example
-------
SoC common .dtsi file:
can0: can@e6e80000 {
compatible = "renesas,can-r8a7791";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
status = "disabled";
};
Board specific .dts file:
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
status = "okay";
};