| QorIQ DPAA Queue Manager Portals Device Tree Binding |
| |
| Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. |
| |
| CONTENTS |
| |
| - QMan Portal |
| - QMan Pool Channel |
| - Example |
| |
| QMan Portal Node |
| |
| Portals are memory mapped interfaces to QMan that allow low-latency, lock-less |
| interaction by software running on processor cores, accelerators and network |
| interfaces with the QMan |
| |
| PROPERTIES |
| |
| - compatible |
| Usage: Required |
| Value type: <stringlist> |
| Definition: Must include "fsl,qman-portal-<hardware revision>" |
| May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal" |
| |
| - reg |
| Usage: Required |
| Value type: <prop-encoded-array> |
| Definition: Two regions. The first is the cache-enabled region of |
| the portal. The second is the cache-inhibited region of |
| the portal |
| |
| - interrupts |
| Usage: Required |
| Value type: <prop-encoded-array> |
| Definition: Standard property |
| |
| - fsl,liodn |
| Usage: See pamu.txt |
| Value type: <prop-encoded-array> |
| Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN |
| (FLIODN) |
| |
| - fsl,iommu-parent |
| Usage: See pamu.txt |
| Value type: <phandle> |
| Definition: PAMU property used for dynamic LIODN assignment |
| |
| For additional details about the PAMU/LIODN binding(s) see pamu.txt |
| |
| - fsl,qman-channel-id |
| Usage: Required |
| Value type: <u32> |
| Definition: The hardware index of the channel. This can also be |
| determined by dividing any of the channel's 8 work queue |
| IDs by 8 |
| |
| In addition to these properties the qman-portals should have sub-nodes to |
| represent the HW devices/portals that are connected to the software portal |
| described here |
| |
| The currently supported sub-nodes are: |
| * fman0 |
| * fman1 |
| * pme |
| * crypto |
| |
| These subnodes should have the following properties: |
| |
| - fsl,liodn |
| Usage: See pamu.txt |
| Value type: <prop-encoded-array> |
| Definition: PAMU property used for static LIODN assignment |
| |
| - fsl,iommu-parent |
| Usage: See pamu.txt |
| Value type: <phandle> |
| Definition: PAMU property used for dynamic LIODN assignment |
| |
| - dev-handle |
| Usage: Required |
| Value type: <phandle> |
| Definition: The phandle to the particular hardware device that this |
| portal is connected to. |
| |
| DPAA QMan Pool Channel Nodes |
| |
| Pool Channels are defined with the following properties. |
| |
| PROPERTIES |
| |
| - compatible |
| Usage: Required |
| Value type: <stringlist> |
| Definition: Must include "fsl,qman-pool-channel" |
| May include "fsl,<SoC>-qman-pool-channel" |
| |
| - fsl,qman-channel-id |
| Usage: Required |
| Value type: <u32> |
| Definition: The hardware index of the channel. This can also be |
| determined by dividing any of the channel's 8 work queue |
| IDs by 8 |
| |
| EXAMPLE |
| |
| The example below shows a (P4080) QMan portals container/bus node with two portals |
| |
| qman-portals@ff4200000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0 0xf 0xf4200000 0x200000>; |
| |
| qman-portal@0 { |
| compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; |
| reg = <0 0x4000>, <0x100000 0x1000>; |
| interrupts = <104 2 0 0>; |
| fsl,liodn = <1 2>; |
| fsl,qman-channel-id = <0>; |
| |
| fman0 { |
| fsl,liodn = <0x21>; |
| dev-handle = <&fman0>; |
| }; |
| fman1 { |
| fsl,liodn = <0xa1>; |
| dev-handle = <&fman1>; |
| }; |
| crypto { |
| fsl,liodn = <0x41 0x66>; |
| dev-handle = <&crypto>; |
| }; |
| }; |
| qman-portal@4000 { |
| compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; |
| reg = <0x4000 0x4000>, <0x101000 0x1000>; |
| interrupts = <106 2 0 0>; |
| fsl,liodn = <3 4>; |
| fsl,qman-channel-id = <1>; |
| |
| fman0 { |
| fsl,liodn = <0x22>; |
| dev-handle = <&fman0>; |
| }; |
| fman1 { |
| fsl,liodn = <0xa2>; |
| dev-handle = <&fman1>; |
| }; |
| crypto { |
| fsl,liodn = <0x42 0x67>; |
| dev-handle = <&crypto>; |
| }; |
| }; |
| }; |