| NVIDIA Tegra20 SFLASH controller. |
| |
| Required properties: |
| - compatible : should be "nvidia,tegra20-sflash". |
| - reg: Should contain SFLASH registers location and length. |
| - interrupts: Should contain SFLASH interrupts. |
| - clocks : Must contain one entry, for the module clock. |
| See ../clocks/clock-bindings.txt for details. |
| - resets : Must contain an entry for each entry in reset-names. |
| See ../reset/reset.txt for details. |
| - reset-names : Must include the following entries: |
| - spi |
| - dmas : Must contain an entry for each entry in clock-names. |
| See ../dma/dma.txt for details. |
| - dma-names : Must include the following entries: |
| - rx |
| - tx |
| |
| Recommended properties: |
| - spi-max-frequency: Definition as per |
| Documentation/devicetree/bindings/spi/spi-bus.txt |
| |
| Example: |
| |
| spi@7000c380 { |
| compatible = "nvidia,tegra20-sflash"; |
| reg = <0x7000c380 0x80>; |
| interrupts = <0 39 0x04>; |
| spi-max-frequency = <25000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car 43>; |
| resets = <&tegra_car 43>; |
| reset-names = "spi"; |
| dmas = <&apbdma 11>, <&apbdma 11>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
