blob: 5cd8eee74af1c127c7a8b77aeb45680b2b3d9fb0 [file] [log] [blame]
ARM sp804 Dual Timers
Required properties:
- compatible: Should be "arm,sp804" & "arm,primecell"
- interrupts: Should contain the list of Dual Timer interrupts. This is the
interrupt for timer 1 and timer 2. In the case of a single entry, it is
the combined interrupt or if "arm,sp804-has-irq" is present that
specifies which timer interrupt is connected.
- reg: Should contain location and length for dual timer register.
- clocks: clocks driving the dual timer hardware. This list should be 1 or 3
clocks. With 3 clocks, the order is timer0 clock, timer1 clock,
apb_pclk. A single clock can also be specified if the same clock is
used for all clock inputs.
Optional properties:
- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
specifies if the irq connection is for timer 1 or timer 2. A value of 1
or 2 should be used.
timer0: timer@fc800000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfc800000 0x1000>;
interrupts = <0 0 4>, <0 1 4>;
clocks = <&timclk1 &timclk2 &pclk>;
clock-names = "timer1", "timer2", "apb_pclk";