/*
 * Copyright © 2006-2007 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Authors:
 *	Eric Anholt <eric@anholt.net>
 *	Dave Airlie <airlied@linux.ie>
 *	Jesse Barnes <jesse.barnes@intel.com>
 */

#include <linux/i2c.h>
#include <drm/drmP.h>

#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>

/*
 * LVDS I2C backlight control macros
 */
#define BRIGHTNESS_MAX_LEVEL 100
#define BRIGHTNESS_MASK 0xFF
#define BLC_I2C_TYPE	0x01
#define BLC_PWM_TYPT	0x02

#define BLC_POLARITY_NORMAL 0
#define BLC_POLARITY_INVERSE 1

#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)
#define PSB_BLC_PWM_PRECISION_FACTOR	(10)
#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)

struct psb_intel_lvds_priv {
	/*
	 * Saved LVDO output states
	 */
	uint32_t savePP_ON;
	uint32_t savePP_OFF;
	uint32_t saveLVDS;
	uint32_t savePP_CONTROL;
	uint32_t savePP_CYCLE;
	uint32_t savePFIT_CONTROL;
	uint32_t savePFIT_PGM_RATIOS;
	uint32_t saveBLC_PWM_CTL;

	struct psb_intel_i2c_chan *i2c_bus;
	struct psb_intel_i2c_chan *ddc_bus;
};


/*
 * Returns the maximum level of the backlight duty cycle field.
 */
static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 ret;

	if (gma_power_begin(dev, false)) {
		ret = REG_READ(BLC_PWM_CTL);
		gma_power_end(dev);
	} else /* Powered off, use the saved value */
		ret = dev_priv->regs.saveBLC_PWM_CTL;

	/* Top 15bits hold the frequency mask */
	ret = (ret &  BACKLIGHT_MODULATION_FREQ_MASK) >>
					BACKLIGHT_MODULATION_FREQ_SHIFT;

        ret *= 2;	/* Return a 16bit range as needed for setting */
        if (ret == 0)
                dev_err(dev->dev, "BL bug: Reg %08x save %08X\n",
                        REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL);
	return ret;
}

/*
 * Set LVDS backlight level by I2C command
 *
 * FIXME: at some point we need to both track this for PM and also
 * disable runtime pm on MRST if the brightness is nil (ie blanked)
 */
static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
					unsigned int level)
{
	struct drm_psb_private *dev_priv =
		(struct drm_psb_private *)dev->dev_private;

	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
	u8 out_buf[2];
	unsigned int blc_i2c_brightness;

	struct i2c_msg msgs[] = {
		{
			.addr = lvds_i2c_bus->slave_addr,
			.flags = 0,
			.len = 2,
			.buf = out_buf,
		}
	};

	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
			     BRIGHTNESS_MASK /
			     BRIGHTNESS_MAX_LEVEL);

	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;

	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
	out_buf[1] = (u8)blc_i2c_brightness;

	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
		dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
			dev_priv->lvds_bl->brightnesscmd,
			blc_i2c_brightness);
		return 0;
	}

	dev_err(dev->dev, "I2C transfer error\n");
	return -1;
}


static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
{
	struct drm_psb_private *dev_priv =
			(struct drm_psb_private *)dev->dev_private;

	u32 max_pwm_blc;
	u32 blc_pwm_duty_cycle;

	max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);

	/*BLC_PWM_CTL Should be initiated while backlight device init*/
	BUG_ON(max_pwm_blc == 0);

	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;

	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;

	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
	REG_WRITE(BLC_PWM_CTL,
		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
		  (blc_pwm_duty_cycle));

        dev_info(dev->dev, "Backlight lvds set brightness %08x\n",
		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
		  (blc_pwm_duty_cycle));

	return 0;
}

/*
 * Set LVDS backlight level either by I2C or PWM
 */
void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
{
	struct drm_psb_private *dev_priv = dev->dev_private;

	dev_dbg(dev->dev, "backlight level is %d\n", level);

	if (!dev_priv->lvds_bl) {
		dev_err(dev->dev, "NO LVDS backlight info\n");
		return;
	}

	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
		psb_lvds_i2c_set_brightness(dev, level);
	else
		psb_lvds_pwm_set_brightness(dev, level);
}

/*
 * Sets the backlight level.
 *
 * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
 */
static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 blc_pwm_ctl;

	if (gma_power_begin(dev, false)) {
		blc_pwm_ctl = REG_READ(BLC_PWM_CTL);
		blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
		REG_WRITE(BLC_PWM_CTL,
				(blc_pwm_ctl |
				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
		dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
		gma_power_end(dev);
	} else {
		blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
				~BACKLIGHT_DUTY_CYCLE_MASK;
		dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
	}
}

/*
 * Sets the power state for the panel.
 */
static void psb_intel_lvds_set_power(struct drm_device *dev, bool on)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
	u32 pp_status;

	if (!gma_power_begin(dev, true)) {
	        dev_err(dev->dev, "set power, chip off!\n");
		return;
        }
        
	if (on) {
		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
			  POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while ((pp_status & PP_ON) == 0);

		psb_intel_lvds_set_backlight(dev,
					     mode_dev->backlight_duty_cycle);
	} else {
		psb_intel_lvds_set_backlight(dev, 0);

		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
			  ~POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while (pp_status & PP_ON);
	}

	gma_power_end(dev);
}

static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
{
	struct drm_device *dev = encoder->dev;

	if (mode == DRM_MODE_DPMS_ON)
		psb_intel_lvds_set_power(dev, true);
	else
		psb_intel_lvds_set_power(dev, false);

	/* XXX: We never power down the LVDS pairs. */
}

static void psb_intel_lvds_save(struct drm_connector *connector)
{
	struct drm_device *dev = connector->dev;
	struct drm_psb_private *dev_priv =
		(struct drm_psb_private *)dev->dev_private;
	struct psb_intel_encoder *psb_intel_encoder =
					psb_intel_attached_encoder(connector);
	struct psb_intel_lvds_priv *lvds_priv =
		(struct psb_intel_lvds_priv *)psb_intel_encoder->dev_priv;

	lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
	lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
	lvds_priv->saveLVDS = REG_READ(LVDS);
	lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
	lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
	/*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
	lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
	lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
	lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);

	/*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
	dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL &
						BACKLIGHT_DUTY_CYCLE_MASK);

	/*
	 * If the light is off at server startup,
	 * just make it full brightness
	 */
	if (dev_priv->backlight_duty_cycle == 0)
		dev_priv->backlight_duty_cycle =
		psb_intel_lvds_get_max_backlight(dev);

	dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
			lvds_priv->savePP_ON,
			lvds_priv->savePP_OFF,
			lvds_priv->saveLVDS,
			lvds_priv->savePP_CONTROL,
			lvds_priv->savePP_CYCLE,
			lvds_priv->saveBLC_PWM_CTL);
}

static void psb_intel_lvds_restore(struct drm_connector *connector)
{
	struct drm_device *dev = connector->dev;
	u32 pp_status;
	struct psb_intel_encoder *psb_intel_encoder =
					psb_intel_attached_encoder(connector);
	struct psb_intel_lvds_priv *lvds_priv =
		(struct psb_intel_lvds_priv *)psb_intel_encoder->dev_priv;

	dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
			lvds_priv->savePP_ON,
			lvds_priv->savePP_OFF,
			lvds_priv->saveLVDS,
			lvds_priv->savePP_CONTROL,
			lvds_priv->savePP_CYCLE,
			lvds_priv->saveBLC_PWM_CTL);

	REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
	REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
	REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
	REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
	REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
	/*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
	REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
	REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
	REG_WRITE(LVDS, lvds_priv->saveLVDS);

	if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
			POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while ((pp_status & PP_ON) == 0);
	} else {
		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
			~POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while (pp_status & PP_ON);
	}
}

int psb_intel_lvds_mode_valid(struct drm_connector *connector,
				 struct drm_display_mode *mode)
{
	struct drm_psb_private *dev_priv = connector->dev->dev_private;
	struct psb_intel_encoder *psb_intel_encoder =
					psb_intel_attached_encoder(connector);
	struct drm_display_mode *fixed_mode =
					dev_priv->mode_dev.panel_fixed_mode;

	if (psb_intel_encoder->type == INTEL_OUTPUT_MIPI2)
		fixed_mode = dev_priv->mode_dev.panel_fixed_mode2;

	/* just in case */
	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
		return MODE_NO_DBLESCAN;

	/* just in case */
	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
		return MODE_NO_INTERLACE;

	if (fixed_mode) {
		if (mode->hdisplay > fixed_mode->hdisplay)
			return MODE_PANEL;
		if (mode->vdisplay > fixed_mode->vdisplay)
			return MODE_PANEL;
	}
	return MODE_OK;
}

bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
				  const struct drm_display_mode *mode,
				  struct drm_display_mode *adjusted_mode)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
	struct psb_intel_crtc *psb_intel_crtc =
				to_psb_intel_crtc(encoder->crtc);
	struct drm_encoder *tmp_encoder;
	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
	struct psb_intel_encoder *psb_intel_encoder =
						to_psb_intel_encoder(encoder);

	if (psb_intel_encoder->type == INTEL_OUTPUT_MIPI2)
		panel_fixed_mode = mode_dev->panel_fixed_mode2;

	/* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
	if (!IS_MRST(dev) && psb_intel_crtc->pipe == 0) {
		printk(KERN_ERR "Can't support LVDS on pipe A\n");
		return false;
	}
	if (IS_MRST(dev) && psb_intel_crtc->pipe != 0) {
		printk(KERN_ERR "Must use PIPE A\n");
		return false;
	}
	/* Should never happen!! */
	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
			    head) {
		if (tmp_encoder != encoder
		    && tmp_encoder->crtc == encoder->crtc) {
			printk(KERN_ERR "Can't enable LVDS and another "
			       "encoder on the same pipe\n");
			return false;
		}
	}

	/*
	 * If we have timings from the BIOS for the panel, put them in
	 * to the adjusted mode.  The CRTC will be set up for this mode,
	 * with the panel scaling set up to source from the H/VDisplay
	 * of the original mode.
	 */
	if (panel_fixed_mode != NULL) {
		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
		adjusted_mode->htotal = panel_fixed_mode->htotal;
		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
		adjusted_mode->clock = panel_fixed_mode->clock;
		drm_mode_set_crtcinfo(adjusted_mode,
				      CRTC_INTERLACE_HALVE_V);
	}

	/*
	 * XXX: It would be nice to support lower refresh rates on the
	 * panels to reduce power consumption, and perhaps match the
	 * user's requested refresh rate.
	 */

	return true;
}

static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;

	if (!gma_power_begin(dev, true))
		return;

	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
					  BACKLIGHT_DUTY_CYCLE_MASK);

	psb_intel_lvds_set_power(dev, false);

	gma_power_end(dev);
}

static void psb_intel_lvds_commit(struct drm_encoder *encoder)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;

	if (mode_dev->backlight_duty_cycle == 0)
		mode_dev->backlight_duty_cycle =
		    psb_intel_lvds_get_max_backlight(dev);

	psb_intel_lvds_set_power(dev, true);
}

static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
				struct drm_display_mode *mode,
				struct drm_display_mode *adjusted_mode)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 pfit_control;

	/*
	 * The LVDS pin pair will already have been turned on in the
	 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
	 * settings.
	 */

	/*
	 * Enable automatic panel scaling so that non-native modes fill the
	 * screen.  Should be enabled before the pipe is enabled, according to
	 * register description and PRM.
	 */
	if (mode->hdisplay != adjusted_mode->hdisplay ||
	    mode->vdisplay != adjusted_mode->vdisplay)
		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
				HORIZ_INTERP_BILINEAR);
	else
		pfit_control = 0;

	if (dev_priv->lvds_dither)
		pfit_control |= PANEL_8TO6_DITHER_ENABLE;

	REG_WRITE(PFIT_CONTROL, pfit_control);
}

/*
 * Detect the LVDS connection.
 *
 * This always returns CONNECTOR_STATUS_CONNECTED.
 * This connector should only have
 * been set up if the LVDS was actually connected anyway.
 */
static enum drm_connector_status psb_intel_lvds_detect(struct drm_connector
						   *connector, bool force)
{
	return connector_status_connected;
}

/*
 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 */
static int psb_intel_lvds_get_modes(struct drm_connector *connector)
{
	struct drm_device *dev = connector->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
	struct psb_intel_encoder *psb_intel_encoder =
					psb_intel_attached_encoder(connector);
	struct psb_intel_lvds_priv *lvds_priv = psb_intel_encoder->dev_priv;
	int ret = 0;

	if (!IS_MRST(dev))
		ret = psb_intel_ddc_get_modes(connector, &lvds_priv->i2c_bus->adapter);

	if (ret)
		return ret;

	/* Didn't get an EDID, so
	 * Set wide sync ranges so we get all modes
	 * handed to valid_mode for checking
	 */
	connector->display_info.min_vfreq = 0;
	connector->display_info.max_vfreq = 200;
	connector->display_info.min_hfreq = 0;
	connector->display_info.max_hfreq = 200;

	if (mode_dev->panel_fixed_mode != NULL) {
		struct drm_display_mode *mode =
		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
		drm_mode_probed_add(connector, mode);
		return 1;
	}

	return 0;
}

/**
 * psb_intel_lvds_destroy - unregister and free LVDS structures
 * @connector: connector to free
 *
 * Unregister the DDC bus for this connector then free the driver private
 * structure.
 */
void psb_intel_lvds_destroy(struct drm_connector *connector)
{
	struct psb_intel_encoder *psb_intel_encoder =
					psb_intel_attached_encoder(connector);
	struct psb_intel_lvds_priv *lvds_priv = psb_intel_encoder->dev_priv;

	if (lvds_priv->ddc_bus)
		psb_intel_i2c_destroy(lvds_priv->ddc_bus);
	drm_sysfs_connector_remove(connector);
	drm_connector_cleanup(connector);
	kfree(connector);
}

int psb_intel_lvds_set_property(struct drm_connector *connector,
				       struct drm_property *property,
				       uint64_t value)
{
	struct drm_encoder *encoder = connector->encoder;

	if (!encoder)
		return -1;

	if (!strcmp(property->name, "scaling mode")) {
		struct psb_intel_crtc *crtc =
					to_psb_intel_crtc(encoder->crtc);
		uint64_t curval;

		if (!crtc)
			goto set_prop_error;

		switch (value) {
		case DRM_MODE_SCALE_FULLSCREEN:
			break;
		case DRM_MODE_SCALE_NO_SCALE:
			break;
		case DRM_MODE_SCALE_ASPECT:
			break;
		default:
			goto set_prop_error;
		}

		if (drm_object_property_get_value(&connector->base,
						     property,
						     &curval))
			goto set_prop_error;

		if (curval == value)
			goto set_prop_done;

		if (drm_object_property_set_value(&connector->base,
							property,
							value))
			goto set_prop_error;

		if (crtc->saved_mode.hdisplay != 0 &&
		    crtc->saved_mode.vdisplay != 0) {
			if (!drm_crtc_helper_set_mode(encoder->crtc,
						      &crtc->saved_mode,
						      encoder->crtc->x,
						      encoder->crtc->y,
						      encoder->crtc->fb))
				goto set_prop_error;
		}
	} else if (!strcmp(property->name, "backlight")) {
		if (drm_object_property_set_value(&connector->base,
							property,
							value))
			goto set_prop_error;
		else
                        gma_backlight_set(encoder->dev, value);
	} else if (!strcmp(property->name, "DPMS")) {
		struct drm_encoder_helper_funcs *hfuncs
						= encoder->helper_private;
		hfuncs->dpms(encoder, value);
	}

set_prop_done:
	return 0;
set_prop_error:
	return -1;
}

static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
	.dpms = psb_intel_lvds_encoder_dpms,
	.mode_fixup = psb_intel_lvds_mode_fixup,
	.prepare = psb_intel_lvds_prepare,
	.mode_set = psb_intel_lvds_mode_set,
	.commit = psb_intel_lvds_commit,
};

const struct drm_connector_helper_funcs
				psb_intel_lvds_connector_helper_funcs = {
	.get_modes = psb_intel_lvds_get_modes,
	.mode_valid = psb_intel_lvds_mode_valid,
	.best_encoder = psb_intel_best_encoder,
};

const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
	.dpms = drm_helper_connector_dpms,
	.save = psb_intel_lvds_save,
	.restore = psb_intel_lvds_restore,
	.detect = psb_intel_lvds_detect,
	.fill_modes = drm_helper_probe_single_connector_modes,
	.set_property = psb_intel_lvds_set_property,
	.destroy = psb_intel_lvds_destroy,
};


static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
	drm_encoder_cleanup(encoder);
}

const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
	.destroy = psb_intel_lvds_enc_destroy,
};


/**
 * psb_intel_lvds_init - setup LVDS connectors on this device
 * @dev: drm device
 *
 * Create the connector, register the LVDS DDC bus, and try to figure out what
 * modes we can display on the LVDS panel (if present).
 */
void psb_intel_lvds_init(struct drm_device *dev,
			 struct psb_intel_mode_device *mode_dev)
{
	struct psb_intel_encoder *psb_intel_encoder;
	struct psb_intel_connector *psb_intel_connector;
	struct psb_intel_lvds_priv *lvds_priv;
	struct drm_connector *connector;
	struct drm_encoder *encoder;
	struct drm_display_mode *scan;	/* *modes, *bios_mode; */
	struct drm_crtc *crtc;
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 lvds;
	int pipe;

	psb_intel_encoder =
			kzalloc(sizeof(struct psb_intel_encoder), GFP_KERNEL);
	if (!psb_intel_encoder) {
		dev_err(dev->dev, "psb_intel_encoder allocation error\n");
		return;
	}

	psb_intel_connector =
		kzalloc(sizeof(struct psb_intel_connector), GFP_KERNEL);
	if (!psb_intel_connector) {
		dev_err(dev->dev, "psb_intel_connector allocation error\n");
		goto failed_encoder;
	}

	lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
	if (!lvds_priv) {
		dev_err(dev->dev, "LVDS private allocation error\n");
		goto failed_connector;
	}

	psb_intel_encoder->dev_priv = lvds_priv;

	connector = &psb_intel_connector->base;
	encoder = &psb_intel_encoder->base;
	drm_connector_init(dev, connector,
			   &psb_intel_lvds_connector_funcs,
			   DRM_MODE_CONNECTOR_LVDS);

	drm_encoder_init(dev, encoder,
			 &psb_intel_lvds_enc_funcs,
			 DRM_MODE_ENCODER_LVDS);

	psb_intel_connector_attach_encoder(psb_intel_connector,
					   psb_intel_encoder);
	psb_intel_encoder->type = INTEL_OUTPUT_LVDS;

	drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
	drm_connector_helper_add(connector,
				 &psb_intel_lvds_connector_helper_funcs);
	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
	connector->interlace_allowed = false;
	connector->doublescan_allowed = false;

	/*Attach connector properties*/
	drm_object_attach_property(&connector->base,
				      dev->mode_config.scaling_mode_property,
				      DRM_MODE_SCALE_FULLSCREEN);
	drm_object_attach_property(&connector->base,
				      dev_priv->backlight_property,
				      BRIGHTNESS_MAX_LEVEL);

	/*
	 * Set up I2C bus
	 * FIXME: distroy i2c_bus when exit
	 */
	lvds_priv->i2c_bus = psb_intel_i2c_create(dev, GPIOB, "LVDSBLC_B");
	if (!lvds_priv->i2c_bus) {
		dev_printk(KERN_ERR,
			&dev->pdev->dev, "I2C bus registration failed.\n");
		goto failed_blc_i2c;
	}
	lvds_priv->i2c_bus->slave_addr = 0x2C;
	dev_priv->lvds_i2c_bus =  lvds_priv->i2c_bus;

	/*
	 * LVDS discovery:
	 * 1) check for EDID on DDC
	 * 2) check for VBT data
	 * 3) check to see if LVDS is already on
	 *    if none of the above, no panel
	 * 4) make sure lid is open
	 *    if closed, act like it's not there for now
	 */

	/* Set up the DDC bus. */
	lvds_priv->ddc_bus = psb_intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
	if (!lvds_priv->ddc_bus) {
		dev_printk(KERN_ERR, &dev->pdev->dev,
			   "DDC bus registration " "failed.\n");
		goto failed_ddc;
	}

	/*
	 * Attempt to get the fixed panel mode from DDC.  Assume that the
	 * preferred mode is the right one.
	 */
	psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
	list_for_each_entry(scan, &connector->probed_modes, head) {
		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
			mode_dev->panel_fixed_mode =
			    drm_mode_duplicate(dev, scan);
			goto out;	/* FIXME: check for quirks */
		}
	}

	/* Failed to get EDID, what about VBT? do we need this? */
	if (mode_dev->vbt_mode)
		mode_dev->panel_fixed_mode =
		    drm_mode_duplicate(dev, mode_dev->vbt_mode);

	if (!mode_dev->panel_fixed_mode)
		if (dev_priv->lfp_lvds_vbt_mode)
			mode_dev->panel_fixed_mode =
				drm_mode_duplicate(dev,
					dev_priv->lfp_lvds_vbt_mode);

	/*
	 * If we didn't get EDID, try checking if the panel is already turned
	 * on.	If so, assume that whatever is currently programmed is the
	 * correct mode.
	 */
	lvds = REG_READ(LVDS);
	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);

	if (crtc && (lvds & LVDS_PORT_EN)) {
		mode_dev->panel_fixed_mode =
		    psb_intel_crtc_mode_get(dev, crtc);
		if (mode_dev->panel_fixed_mode) {
			mode_dev->panel_fixed_mode->type |=
			    DRM_MODE_TYPE_PREFERRED;
			goto out;	/* FIXME: check for quirks */
		}
	}

	/* If we still don't have a mode after all that, give up. */
	if (!mode_dev->panel_fixed_mode) {
		dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
		goto failed_find;
	}

	/*
	 * Blacklist machines with BIOSes that list an LVDS panel without
	 * actually having one.
	 */
out:
	drm_sysfs_connector_add(connector);
	return;

failed_find:
	if (lvds_priv->ddc_bus)
		psb_intel_i2c_destroy(lvds_priv->ddc_bus);
failed_ddc:
	if (lvds_priv->i2c_bus)
		psb_intel_i2c_destroy(lvds_priv->i2c_bus);
failed_blc_i2c:
	drm_encoder_cleanup(encoder);
	drm_connector_cleanup(connector);
failed_connector:
	kfree(psb_intel_connector);
failed_encoder:
	kfree(psb_intel_encoder);
}