blob: 68658dcb5c1189948b293fa60a18488e43302237 [file] [log] [blame]
/*
* Copyright (c) 2012 Nest Labs, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the Free
* Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Description:
* This file defines the x-loader configuration settings for the
* Nest Learning Thermostat J49 board. The items below should
* be updated as the hardware settles.
*
* SDRAM Controller (SDRC):
* - Samsung K4X51163PI-FCG6 64 MiB DDR SDRAM
*
* General Purpose Memory Controller (GPMC):
* - Micron MT29F2G16ABDHC-ET 256 MiB SLC NAND Flash (Development)
* - Micron MT29F2G16ABBEAH4 256 MiB SLC NAND Flash (Non-development)
* - Samsung K9F4G08U0C 512 MiB SLC NAND Flash (Development)
* - SMSC LAN9220 10/100 Mbit Ethernet MAC and PHY (Development)
*
* Multimedia Card (MMC) Interface:
* - Molex 500998-0900 Secure Digital (SD) Connector
* - TI WL1270 Wireless LAN (WLAN) Module
*
* Display Subsystem (DSS):
* - Samsung LMS350DF03 HVGA (320 x 480) LCM (Development and Prototype)
* - Tianma TM025ZDZ01 (320 x 320) LCM (Production)
*
* Camera Image Signal Processor:
* - Unused
*
* UART Controller:
* - Channel 1:
* * Head Unit Serial Console
*
* - Channel 2:
* * ZigBee Wireless Module
*
* Multichannel Buffered Serial Port (McBSP):
* - Channel 1:
* - Channel 2:
* - Channel 3:
* - Channel 4:
* - Channel 5:
*
* Multichannel Serial Peripheral Interface (McSPI):
* - Channel 1:
* - Channel 2:
* - Channel 3:
*
* GPIO Controller:
* - Backplate Detect
* - ZigBee
*/
#ifndef __J49_CONFIG_H
#define __J49_CONFIG_H
#include "diamond.h"
/*
* Assert the board type(s) we are building for.
*
*/
#undef CONFIG_J49_BOARD_PROTOTYPE
#undef CONFIG_J49_BOARD_EVT
#undef CONFIG_J49_BOARD_DVT
#undef CONFIG_J49_BOARD_PRE_PVT
#define CONFIG_J49_BOARD_MULTI 1
#endif /* __J49_CONFIG_H */