| * Freescale MXS USB Phy Device |
| |
| Required properties: |
| - compatible: "fsl,imx23-usbphy" for imx23 and imx28, "fsl,imx6q-usbphy" |
| for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl |
| - reg: Should contain registers location and length |
| - interrupts: Should contain phy interrupt |
| - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series |
| |
| Example: |
| usbphy1: usbphy@020c9000 { |
| compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x020c9000 0x1000>; |
| interrupts = <0 44 0x04>; |
| fsl,anatop = <&anatop>; |
| }; |
