Documentation/DocBook/dvb/dvbproperty.xml - nest-learning-thermostat/5.6.1/linux - Git at Google

 <section id="FE_GET_PROPERTY">
 <title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>

 <section id="isdbt">
 	<title>ISDB-T frontend</title>
 	<para>This section describes shortly what are the possible parameters in the Linux
 		DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb
 		demodulator:</para>

 	<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
 		needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
 		that some very sophisticated devices won't need certain parameters to
 		tune.</para>

 	<para>The information given here should help application writers to know how
 		to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>

 	<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
 		basically show the dependencies between the needed parameter values,
 		but surely some information is left out. For more detailed information
 		see the following documents:</para>

 	<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
 		Television Broadcasting" and</para>
 	<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
 		Television Broadcasting".</para>

 	<para>In order to read this document one has to have some knowledge the
 		channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to
 		the reader that an ISDB-T channel consists of 13 segments, that it can
 		have up to 3 layer sharing those segments, and things like that.</para>

 	<para>Parameters used by ISDB-T and ISDB-Tsb.</para>

 	<section id="isdbt-parms">
 		<title>Parameters that are common with DVB-T and ATSC</title>

 		<section id="isdbt-freq">
 			<title><constant>DTV_FREQUENCY</constant></title>

 			<para>Central frequency of the channel.</para>

 			<para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a
 				valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 				the channel which is 6MHz.</para>

 			<para>As in ISDB-Tsb the channel consists of only one or three segments the
 				frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
 				central frequency of the channel is expected.</para>
 		</section>

 		<section id="isdbt-bw">
 			<title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title>

 			<para>Possible values:</para>

 			<para>For ISDB-T it should be always 6000000Hz (6MHz)</para>
 			<para>For ISDB-Tsb it can vary depending on the number of connected segments</para>

 			<para>Note: Hardware specific values might be given here, but standard
 				applications should not bother to set a value to this field as
 				standard demods are ignoring it anyway.</para>

 			<para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
 				other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
 				DTV_ISDBT_SB_SEGMENT_COUNT).</para>
 		</section>

 		<section id="isdbt-delivery-sys">
 			<title><constant>DTV_DELIVERY_SYSTEM</constant></title>

 			<para>Possible values: <constant>SYS_ISDBT</constant></para>
 		</section>

 		<section id="isdbt-tx-mode">
 			<title><constant>DTV_TRANSMISSION_MODE</constant></title>

 			<para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
 				'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>

 			<para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>,
 				<constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para>

 			<para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
 				hardware will try to find the correct FFT-size (if capable) and will
 				use TMCC to fill in the missing parameters.</para>

 			<para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para>
 		</section>

 		<section id="isdbt-guard-interval">
 			<title><constant>DTV_GUARD_INTERVAL</constant></title>

 			<para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>,
 				<constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para>

 			<para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
 				try to find the correct guard interval (if capable) and will use TMCC to fill
 				in the missing parameters.</para>
 		</section>
 	</section>
 	<section id="isdbt-new-parms">
 		<title>ISDB-T only parameters</title>

 		<section id="isdbt-part-rec">
 			<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>

 			<para><constant>If DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
 				the channel is in partial reception mode or not.</para>

 			<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
 				<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>

 			<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
 				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
 				is consisting of one segment and layer or three segments and two layers.</para>

 			<para>Possible values: 0, 1, -1 (AUTO)</para>
 		</section>

 		<section id="isdbt-sound-bcast">
 			<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>

 			<para>This field represents whether the other DTV_ISDBT_*-parameters are
 				referring to an ISDB-T and an ISDB-Tsb channel. (See also
 				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>

 			<para>Possible values: 0, 1, -1 (AUTO)</para>
 		</section>

 		<section id="isdbt-sb-ch-id">
 			<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>

 			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

 			<para>(Note of the author: This might not be the correct description of the
 				<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
 				background needed to program a device)</para>

 			<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
 				set of connected ISDB-Tsb channels. In this set of channels every
 				channel can be received independently. The number of connected
 				ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
 				bandwidth available.</para>

 			<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
 				broadcaster has several possibilities to put those channels in the
 				air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
 				segments from position 1-8 to 5-13 or anything in between.</para>

 			<para>The underlying layer of segments are subchannels: each segment is
 				consisting of several subchannels with a predefined IDs. A sub-channel
 				is used to help the demodulator to synchronize on the channel.</para>

 			<para>An ISDB-T channel is always centered over all sub-channels. As for
 				the example above, in ISDB-Tsb it is no longer as simple as that.</para>

 			<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
 				sub-channel ID of the segment to be demodulated.</para>

 			<para>Possible values: 0 .. 41, -1 (AUTO)</para>
 		</section>

 		<section id="isdbt-sb-seg-idx">

 			<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>

 			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

 			<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
 				demodulated for an ISDB-Tsb channel where several of them are
 				transmitted in the connected manner.</para>

 			<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>

 			<para>Note: This value cannot be determined by an automatic channel search.</para>
 		</section>

 		<section id="isdbt-sb-seg-cnt">
 			<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>

 			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

 			<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
 				channels.</para>

 			<para>Possible values: 1 .. 13</para>

 			<para>Note: This value cannot be determined by an automatic channel search.</para>
 		</section>

 		<section id="isdb-hierq-layers">
 			<title>Hierarchical layers</title>

 			<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
 				ISDB-T hierarchical layers can be decoded simultaneously. For that
 				reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>

 			<para>ISDB-T has 3 hierarchical layers which each can use a part of the
 				available segments. The total number of segments over all layers has
 				to 13 in ISDB-T.</para>

 			<section id="isdbt-layer-ena">
 				<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>

 				<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
 					layers in the decoding process. Setting all bits of
 					<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
 					demodulated. This is the default.</para>

 				<para>If the channel is in the partial reception mode
 					(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
 					independently of the other 12 segments. In that mode layer A has to
 					have a <constant>SEGMENT_COUNT</constant> of 1.</para>

 				<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
 					according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
 					accordingly.</para>

 				<para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>

 				<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
 				<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
 				<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
 				<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
 			</section>

 			<section id="isdbt-layer-fec">
 				<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>

 				<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
 			</section>

 			<section id="isdbt-layer-mod">
 				<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>

 				<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>

 				<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
 					and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
 			</section>

 			<section id="isdbt-layer-seg-cnt">
 				<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>

 				<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>

 				<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
 					<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>

 				<informaltable id="isdbt-layer_seg-cnt-table">
 					<tgroup cols="6">

 						<tbody>
 							<row>
 								<entry>PR</entry>
 								<entry>SB</entry>
 								<entry>Layer A width</entry>
 								<entry>Layer B width</entry>
 								<entry>Layer C width</entry>
 								<entry>total width</entry>
 							</row>

 							<row>
 								<entry>0</entry>
 								<entry>0</entry>
 								<entry>1 .. 13</entry>
 								<entry>1 .. 13</entry>
 								<entry>1 .. 13</entry>
 								<entry>13</entry>
 							</row>

 							<row>
 								<entry>1</entry>
 								<entry>0</entry>
 								<entry>1</entry>
 								<entry>1 .. 13</entry>
 								<entry>1 .. 13</entry>
 								<entry>13</entry>
 							</row>

 							<row>
 								<entry>0</entry>
 								<entry>1</entry>
 								<entry>1</entry>
 								<entry>0</entry>
 								<entry>0</entry>
 								<entry>1</entry>
 							</row>

 							<row>
 								<entry>1</entry>
 								<entry>1</entry>
 								<entry>1</entry>
 								<entry>2</entry>
 								<entry>0</entry>
 								<entry>13</entry>
 							</row>
 						</tbody>

 					</tgroup>
 				</informaltable>

 			</section>

 			<section id="isdbt_layer_t_interl">
 				<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>

 				<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>

 				<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
 					here are referring to what can be found in the TMCC-structure -
 					independent of the mode.</para>
 			</section>
 		</section>
 	</section>
 </section>
 </section>
	<section id="FE_GET_PROPERTY">
	<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>

	<section id="isdbt">
	<title>ISDB-T frontend</title>
	<para>This section describes shortly what are the possible parameters in the Linux
	DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb
	demodulator:</para>

	<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
	needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
	that some very sophisticated devices won't need certain parameters to
	tune.</para>

	<para>The information given here should help application writers to know how
	to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>

	<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
	basically show the dependencies between the needed parameter values,
	but surely some information is left out. For more detailed information
	see the following documents:</para>

	<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
	Television Broadcasting" and</para>
	<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
	Television Broadcasting".</para>

	<para>In order to read this document one has to have some knowledge the
	channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to
	the reader that an ISDB-T channel consists of 13 segments, that it can
	have up to 3 layer sharing those segments, and things like that.</para>

	<para>Parameters used by ISDB-T and ISDB-Tsb.</para>

	<section id="isdbt-parms">
	<title>Parameters that are common with DVB-T and ATSC</title>

	<section id="isdbt-freq">
	<title><constant>DTV_FREQUENCY</constant></title>

	<para>Central frequency of the channel.</para>

	<para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a
	valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
	the channel which is 6MHz.</para>

	<para>As in ISDB-Tsb the channel consists of only one or three segments the
	frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
	central frequency of the channel is expected.</para>
	</section>

	<section id="isdbt-bw">
	<title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title>

	<para>Possible values:</para>

	<para>For ISDB-T it should be always 6000000Hz (6MHz)</para>
	<para>For ISDB-Tsb it can vary depending on the number of connected segments</para>

	<para>Note: Hardware specific values might be given here, but standard
	applications should not bother to set a value to this field as
	standard demods are ignoring it anyway.</para>

	<para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
	other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
	DTV_ISDBT_SB_SEGMENT_COUNT).</para>
	</section>

	<section id="isdbt-delivery-sys">
	<title><constant>DTV_DELIVERY_SYSTEM</constant></title>

	<para>Possible values: <constant>SYS_ISDBT</constant></para>
	</section>

	<section id="isdbt-tx-mode">
	<title><constant>DTV_TRANSMISSION_MODE</constant></title>

	<para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
	'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>

	<para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>,
	<constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para>

	<para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
	hardware will try to find the correct FFT-size (if capable) and will
	use TMCC to fill in the missing parameters.</para>

	<para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para>
	</section>

	<section id="isdbt-guard-interval">
	<title><constant>DTV_GUARD_INTERVAL</constant></title>

	<para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>,
	<constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para>

	<para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
	try to find the correct guard interval (if capable) and will use TMCC to fill
	in the missing parameters.</para>
	</section>
	</section>
	<section id="isdbt-new-parms">
	<title>ISDB-T only parameters</title>

	<section id="isdbt-part-rec">
	<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>

	<para><constant>If DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
	the channel is in partial reception mode or not.</para>

	<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
	<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>

	<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
	<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
	is consisting of one segment and layer or three segments and two layers.</para>

	<para>Possible values: 0, 1, -1 (AUTO)</para>
	</section>

	<section id="isdbt-sound-bcast">
	<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>

	<para>This field represents whether the other DTV_ISDBT_*-parameters are
	referring to an ISDB-T and an ISDB-Tsb channel. (See also
	<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>

	<para>Possible values: 0, 1, -1 (AUTO)</para>
	</section>

	<section id="isdbt-sb-ch-id">
	<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>

	<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

	<para>(Note of the author: This might not be the correct description of the
	<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
	background needed to program a device)</para>

	<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
	set of connected ISDB-Tsb channels. In this set of channels every
	channel can be received independently. The number of connected
	ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
	bandwidth available.</para>

	<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
	broadcaster has several possibilities to put those channels in the
	air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
	segments from position 1-8 to 5-13 or anything in between.</para>

	<para>The underlying layer of segments are subchannels: each segment is
	consisting of several subchannels with a predefined IDs. A sub-channel
	is used to help the demodulator to synchronize on the channel.</para>

	<para>An ISDB-T channel is always centered over all sub-channels. As for
	the example above, in ISDB-Tsb it is no longer as simple as that.</para>

	<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
	sub-channel ID of the segment to be demodulated.</para>

	<para>Possible values: 0 .. 41, -1 (AUTO)</para>
	</section>

	<section id="isdbt-sb-seg-idx">

	<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>

	<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

	<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
	demodulated for an ISDB-Tsb channel where several of them are
	transmitted in the connected manner.</para>

	<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>

	<para>Note: This value cannot be determined by an automatic channel search.</para>
	</section>

	<section id="isdbt-sb-seg-cnt">
	<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>

	<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>

	<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
	channels.</para>

	<para>Possible values: 1 .. 13</para>

	<para>Note: This value cannot be determined by an automatic channel search.</para>
	</section>

	<section id="isdb-hierq-layers">
	<title>Hierarchical layers</title>

	<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
	ISDB-T hierarchical layers can be decoded simultaneously. For that
	reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>

	<para>ISDB-T has 3 hierarchical layers which each can use a part of the
	available segments. The total number of segments over all layers has
	to 13 in ISDB-T.</para>

	<section id="isdbt-layer-ena">
	<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>

	<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
	layers in the decoding process. Setting all bits of
	<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
	demodulated. This is the default.</para>

	<para>If the channel is in the partial reception mode
	(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
	independently of the other 12 segments. In that mode layer A has to
	have a <constant>SEGMENT_COUNT</constant> of 1.</para>

	<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
	according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
	accordingly.</para>

	<para>Possible values: 0x1, 0x2, 0x4 (\|-able)</para>

	<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
	<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
	<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
	<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
	</section>

	<section id="isdbt-layer-fec">
	<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>

	<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
	</section>

	<section id="isdbt-layer-mod">
	<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>

	<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>

	<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
	and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
	</section>

	<section id="isdbt-layer-seg-cnt">
	<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>

	<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>

	<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
	<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>

	<informaltable id="isdbt-layer_seg-cnt-table">
	<tgroup cols="6">

	<tbody>
	<row>
	<entry>PR</entry>
	<entry>SB</entry>
	<entry>Layer A width</entry>
	<entry>Layer B width</entry>
	<entry>Layer C width</entry>
	<entry>total width</entry>
	</row>

	<row>
	<entry>0</entry>
	<entry>0</entry>
	<entry>1 .. 13</entry>
	<entry>1 .. 13</entry>
	<entry>1 .. 13</entry>
	<entry>13</entry>
	</row>

	<row>
	<entry>1</entry>
	<entry>0</entry>
	<entry>1</entry>
	<entry>1 .. 13</entry>
	<entry>1 .. 13</entry>
	<entry>13</entry>
	</row>

	<row>
	<entry>0</entry>
	<entry>1</entry>
	<entry>1</entry>
	<entry>0</entry>
	<entry>0</entry>
	<entry>1</entry>
	</row>

	<row>
	<entry>1</entry>
	<entry>1</entry>
	<entry>1</entry>
	<entry>2</entry>
	<entry>0</entry>
	<entry>13</entry>
	</row>
	</tbody>

	</tgroup>
	</informaltable>

	</section>

	<section id="isdbt_layer_t_interl">
	<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>

	<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>

	<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
	here are referring to what can be found in the TMCC-structure -
	independent of the mode.</para>
	</section>
	</section>
	</section>
	</section>
	</section>