/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include "skeleton.dtsi"
#include "imx6sl-pinfunc.h"
#include <dt-bindings/clock/imx6sl-clock.h>

/ {
	aliases {
		csi0 = &csi1;
		mmc0 = &usdhc1;
		mmc1 = &usdhc2;
		mmc2 = &usdhc3;
		mmc3 = &usdhc4;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
		gpio4 = &gpio5;
		usbphy0 = &usbphy1;
		usbphy1 = &usbphy2;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "arm,cortex-a9";
			device_type = "cpu";
			reg = <0x0>;
			next-level-cache = <&L2>;
			operating-points = <
				/* kHz   uV */
				996000  1275000
				792000  1175000
				396000  975000
			>;
			fsl,soc-operating-points = <
				/* ARM kHz      SOC-PU uV */
				996000            1225000
				792000            1175000
				396000            1175000
			>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
					<&clks IMX6SL_CLK_PLL1_SYS>;
			clock-names = "arm", "pll2_pfd2_396m", "step",
				      "pll1_sw", "pll1_sys";
			arm-supply = <&reg_arm>;
			pu-supply = <&reg_pu>;
			soc-supply = <&reg_soc>;
		};
	};

	intc: interrupt-controller@00a01000 {
		compatible = "arm,cortex-a9-gic";
		#interrupt-cells = <3>;
		#address-cells = <1>;
		#size-cells = <1>;
		interrupt-controller;
		reg = <0x00a01000 0x1000>,
		      <0x00a00100 0x100>;
	};

	clocks {
		#address-cells = <1>;
		#size-cells = <0>;

		ckil {
			compatible = "fixed-clock";
			clock-frequency = <32768>;
		};

		osc {
			compatible = "fixed-clock";
			clock-frequency = <24000000>;
		};
	};

	pu_dummy: pudummy_reg {
		compatible = "fsl,imx6-dummy-pureg"; /* only used in ldo-bypass */
	};

	reg_vbus_wakeup: usb_vbus_wakeup {
		compatible = "fsl,imx6-dummy-ldo2p5";
	};

	mxs_viim {
		compatible = "fsl,mxs_viim";
		reg = <0x02098000 0x1000>, /* GPT base */
		      <0x021bc000 0x1000>; /* OCOTP base */
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&intc>;
		ranges;

		busfreq { /* BUSFREQ */
			compatible = "fsl,imx6_busfreq";
			clocks = <&clks IMX6SL_CLK_PLL2_BUS>, <&clks IMX6SL_CLK_PLL2_PFD2>,
					<&clks IMX6SL_CLK_PLL2_198M>, <&clks IMX6SL_CLK_ARM>,
					<&clks IMX6SL_CLK_PLL3_USB_OTG>, <&clks IMX6SL_CLK_PERIPH>,
					<&clks IMX6SL_CLK_PRE_PERIPH_SEL>, <&clks IMX6SL_CLK_PERIPH_CLK2>,
					<&clks IMX6SL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SL_CLK_OSC>,
					<&clks IMX6SL_CLK_PLL1_SYS>, <&clks IMX6SL_CLK_PERIPH2>,
					<&clks IMX6SL_CLK_AHB>, <&clks IMX6SL_CLK_OCRAM>,
					<&clks IMX6SL_CLK_PLL1_SW>, <&clks IMX6SL_CLK_PRE_PERIPH2_SEL>,
					<&clks IMX6SL_CLK_PERIPH2_CLK2_SEL>, <&clks IMX6SL_CLK_PERIPH2_CLK2>,
					<&clks IMX6SL_CLK_STEP>;
			clock-names = "pll2_bus", "pll2_pfd2_396m", "pll2_198m", "arm", "pll3_usb_otg", "periph",
				"periph_pre", "periph_clk2", "periph_clk2_sel", "osc", "pll1_sys", "periph2", "ahb", "ocram", "pll1_sw",
				"periph2_pre", "periph2_clk2_sel", "periph2_clk2", "step";
			fsl,max_ddr_freq = <400000000>;
		};

		L2: l2-cache@00a02000 {
			compatible = "arm,pl310-cache";
			reg = <0x00a02000 0x1000>;
			interrupts = <0 92 0x04>;
			cache-unified;
			cache-level = <2>;
			arm,tag-latency = <4 2 3>;
			arm,data-latency = <4 2 3>;
		};

		pmu {
			compatible = "arm,cortex-a9-pmu";
			interrupts = <0 94 0x04>;
		};

		aips1: aips-bus@02000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x02000000 0x100000>;
			ranges;

			spba: spba-bus@02000000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x02000000 0x40000>;
				ranges;

				spdif: spdif@02004000 {
					compatible = "fsl,imx6sl-spdif",
						"fsl,imx35-spdif";
					reg = <0x02004000 0x4000>;
					interrupts = <0 52 0x04>;
					dmas = <&sdma 14 18 0>,
					       <&sdma 15 18 0>;
					dma-names = "rx", "tx";
					clocks = <&clks IMX6SL_CLK_SPDIF>,
					       <&clks IMX6SL_CLK_OSC>,
					       <&clks IMX6SL_CLK_SPDIF>,
					       <&clks 0>, <&clks 0>, <&clks 0>,
					       <&clks IMX6SL_CLK_IPG>,
					       <&clks 0>, <&clks 0>,
					       <&clks IMX6SL_CLK_SPBA>;
					clock-names = "core", "rxtx0",
						"rxtx1", "rxtx2",
						"rxtx3", "rxtx4",
						"rxtx5", "rxtx6",
						"rxtx7", "dma";
					status = "disabled";
				};

				ecspi1: ecspi@02008000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
					reg = <0x02008000 0x4000>;
					interrupts = <0 31 0x04>;
					clocks = <&clks IMX6SL_CLK_ECSPI1>,
						 <&clks IMX6SL_CLK_ECSPI1>;
					clock-names = "ipg", "per";
					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ecspi2: ecspi@0200c000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
					reg = <0x0200c000 0x4000>;
					interrupts = <0 32 0x04>;
					clocks = <&clks IMX6SL_CLK_ECSPI2>,
						 <&clks IMX6SL_CLK_ECSPI2>;
					clock-names = "ipg", "per";
					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ecspi3: ecspi@02010000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
					reg = <0x02010000 0x4000>;
					interrupts = <0 33 0x04>;
					clocks = <&clks IMX6SL_CLK_ECSPI3>,
						 <&clks IMX6SL_CLK_ECSPI3>;
					clock-names = "ipg", "per";
					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ecspi4: ecspi@02014000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
					reg = <0x02014000 0x4000>;
					interrupts = <0 34 0x04>;
					clocks = <&clks IMX6SL_CLK_ECSPI4>,
						 <&clks IMX6SL_CLK_ECSPI4>;
					clock-names = "ipg", "per";
					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart5: serial@02018000 {
					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
					reg = <0x02018000 0x4000>;
					interrupts = <0 30 0x04>;
					clocks = <&clks IMX6SL_CLK_UART>,
						 <&clks IMX6SL_CLK_UART_SERIAL>;
					clock-names = "ipg", "per";
					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart1: serial@02020000 {
					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
					reg = <0x02020000 0x4000>;
					interrupts = <0 26 0x04>;
					clocks = <&clks IMX6SL_CLK_UART>,
						 <&clks IMX6SL_CLK_UART_SERIAL>;
					clock-names = "ipg", "per";
					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart2: serial@02024000 {
					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
					reg = <0x02024000 0x4000>;
					interrupts = <0 27 0x04>;
					clocks = <&clks IMX6SL_CLK_UART>,
						 <&clks IMX6SL_CLK_UART_SERIAL>;
					clock-names = "ipg", "per";
					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ssi1: ssi@02028000 {
					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
					reg = <0x02028000 0x4000>;
					interrupts = <0 46 0x04>;
					clocks = <&clks IMX6SL_CLK_SSI1>, <&clks IMX6SL_CLK_SSI1>;
					clock-names = "ipg", "baud";
					dmas = <&sdma 37 1 0>,
					       <&sdma 38 1 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ssi2: ssi@0202c000 {
					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
					reg = <0x0202c000 0x4000>;
					interrupts = <0 47 0x04>;
					clocks = <&clks IMX6SL_CLK_SSI2>, <&clks IMX6SL_CLK_SSI2>;
					clock-names = "ipg", "baud";
					dmas = <&sdma 41 1 0>,
					       <&sdma 42 1 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ssi3: ssi@02030000 {
					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
					reg = <0x02030000 0x4000>;
					interrupts = <0 48 0x04>;
					clocks = <&clks IMX6SL_CLK_SSI3>, <&clks IMX6SL_CLK_SSI3>;
					clock-names = "ipg", "baud";
					dmas = <&sdma 45 1 0>,
					       <&sdma 46 1 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart3: serial@02034000 {
					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
					reg = <0x02034000 0x4000>;
					interrupts = <0 28 0x04>;
					clocks = <&clks IMX6SL_CLK_UART>,
						 <&clks IMX6SL_CLK_UART_SERIAL>;
					clock-names = "ipg", "per";
					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart4: serial@02038000 {
					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
					reg = <0x02038000 0x4000>;
					interrupts = <0 29 0x04>;
					clocks = <&clks IMX6SL_CLK_UART>,
						 <&clks IMX6SL_CLK_UART_SERIAL>;
					clock-names = "ipg", "per";
					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};
			};

			pwm1: pwm@02080000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
				reg = <0x02080000 0x4000>;
				interrupts = <0 83 0x04>;
				clocks = <&clks IMX6SL_CLK_PWM1>,
					 <&clks IMX6SL_CLK_PWM1>;
				clock-names = "ipg", "per";
			};

			pwm2: pwm@02084000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
				reg = <0x02084000 0x4000>;
				interrupts = <0 84 0x04>;
				clocks = <&clks IMX6SL_CLK_PWM2>,
					 <&clks IMX6SL_CLK_PWM2>;
				clock-names = "ipg", "per";
			};

			pwm3: pwm@02088000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
				reg = <0x02088000 0x4000>;
				interrupts = <0 85 0x04>;
				clocks = <&clks IMX6SL_CLK_PWM3>,
					 <&clks IMX6SL_CLK_PWM3>;
				clock-names = "ipg", "per";
			};

			pwm4: pwm@0208c000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
				reg = <0x0208c000 0x4000>;
				interrupts = <0 86 0x04>;
				clocks = <&clks IMX6SL_CLK_PWM4>,
					 <&clks IMX6SL_CLK_PWM4>;
				clock-names = "ipg", "per";
			};

			gpt: gpt@02098000 {
				compatible = "fsl,imx6sl-gpt";
				reg = <0x02098000 0x4000>;
				interrupts = <0 55 0x04>;
				clocks = <&clks IMX6SL_CLK_GPT>,
					 <&clks IMX6SL_CLK_GPT_SERIAL>;
				clock-names = "ipg", "per";
			};

			gpio1: gpio@0209c000 {
				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
				reg = <0x0209c000 0x4000>;
				interrupts = <0 66 0x04 0 67 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@020a0000 {
				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
				reg = <0x020a0000 0x4000>;
				interrupts = <0 68 0x04 0 69 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio3: gpio@020a4000 {
				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
				reg = <0x020a4000 0x4000>;
				interrupts = <0 70 0x04 0 71 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio4: gpio@020a8000 {
				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
				reg = <0x020a8000 0x4000>;
				interrupts = <0 72 0x04 0 73 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio5: gpio@020ac000 {
				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
				reg = <0x020ac000 0x4000>;
				interrupts = <0 74 0x04 0 75 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			kpp: kpp@020b8000 {
				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
				reg = <0x020b8000 0x4000>;
				interrupts = <0 82 0x04>;
				clocks = <&clks IMX6SL_CLK_DUMMY>;
			};

			wdog1: wdog@020bc000 {
				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
				reg = <0x020bc000 0x4000>;
				interrupts = <0 80 0x04>;
				clocks = <&clks IMX6SL_CLK_DUMMY>;
			};

			wdog2: wdog@020c0000 {
				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
				reg = <0x020c0000 0x4000>;
				interrupts = <0 81 0x04>;
				clocks = <&clks IMX6SL_CLK_DUMMY>;
				status = "disabled";
			};

			clks: ccm@020c4000 {
				compatible = "fsl,imx6sl-ccm";
				reg = <0x020c4000 0x4000>;
				interrupts = <0 87 0x04 0 88 0x04>;
				#clock-cells = <1>;
			};

			anatop: anatop@020c8000 {
				compatible = "fsl,imx6sl-anatop",
					     "fsl,imx6q-anatop",
					     "syscon", "simple-bus";
				reg = <0x020c8000 0x1000>;
				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;

				regulator-1p1@110 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vdd1p1";
					regulator-min-microvolt = <800000>;
					regulator-max-microvolt = <1375000>;
					regulator-always-on;
					anatop-reg-offset = <0x110>;
					anatop-vol-bit-shift = <8>;
					anatop-vol-bit-width = <5>;
					anatop-min-bit-val = <4>;
					anatop-min-voltage = <800000>;
					anatop-max-voltage = <1375000>;
				};

				regulator-3p0@120 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vdd3p0";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <3150000>;
					regulator-always-on;
					anatop-reg-offset = <0x120>;
					anatop-vol-bit-shift = <8>;
					anatop-vol-bit-width = <5>;
					anatop-min-bit-val = <0>;
					anatop-min-voltage = <2625000>;
					anatop-max-voltage = <3400000>;
				};

				regulator-2p5@130 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vdd2p5";
					regulator-min-microvolt = <2100000>;
					regulator-max-microvolt = <2850000>;
					regulator-always-on;
					anatop-reg-offset = <0x130>;
					anatop-vol-bit-shift = <8>;
					anatop-vol-bit-width = <5>;
					anatop-min-bit-val = <0>;
					anatop-min-voltage = <2100000>;
					anatop-max-voltage = <2850000>;
				};

				reg_arm: regulator-vddcore@140 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "cpu";
					regulator-min-microvolt = <725000>;
					regulator-max-microvolt = <1450000>;
					regulator-always-on;
					anatop-reg-offset = <0x140>;
					anatop-vol-bit-shift = <0>;
					anatop-vol-bit-width = <5>;
					anatop-delay-reg-offset = <0x170>;
					anatop-delay-bit-shift = <24>;
					anatop-delay-bit-width = <2>;
					anatop-min-bit-val = <1>;
					anatop-min-voltage = <725000>;
					anatop-max-voltage = <1450000>;
				};

				reg_pu: regulator-vddpu@140 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vddpu";
					regulator-min-microvolt = <725000>;
					regulator-max-microvolt = <1450000>;
					anatop-reg-offset = <0x140>;
					anatop-vol-bit-shift = <9>;
					anatop-vol-bit-width = <5>;
					anatop-delay-reg-offset = <0x170>;
					anatop-delay-bit-shift = <26>;
					anatop-delay-bit-width = <2>;
					anatop-min-bit-val = <1>;
					anatop-min-voltage = <725000>;
					anatop-max-voltage = <1450000>;
				};

				reg_soc: regulator-vddsoc@140 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vddsoc";
					regulator-min-microvolt = <725000>;
					regulator-max-microvolt = <1450000>;
					regulator-always-on;
					anatop-reg-offset = <0x140>;
					anatop-vol-bit-shift = <18>;
					anatop-vol-bit-width = <5>;
					anatop-delay-reg-offset = <0x170>;
					anatop-delay-bit-shift = <28>;
					anatop-delay-bit-width = <2>;
					anatop-min-bit-val = <1>;
					anatop-min-voltage = <725000>;
					anatop-max-voltage = <1450000>;
				};
			};

			tempmon: tempmon {
				compatible = "fsl,imx6sl-tempmon", "fsl,imx6q-tempmon";
				interrupts = <0 49 0x04>;
				fsl,tempmon = <&anatop>;
				fsl,tempmon-data = <&ocotp>;
				clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
			};

			usbphy1: usbphy@020c9000 {
				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
				reg = <0x020c9000 0x1000>;
				interrupts = <0 44 0x04>;
				clocks = <&clks IMX6SL_CLK_USBPHY1>;
				fsl,anatop = <&anatop>;
			};

			usbphy2: usbphy@020ca000 {
				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
				reg = <0x020ca000 0x1000>;
				interrupts = <0 45 0x04>;
				clocks = <&clks IMX6SL_CLK_USBPHY2>;
				fsl,anatop = <&anatop>;
			};

			usbphy_nop1: usbphy_nop1 {
				compatible = "usb-nop-xceiv";
				clocks = <&clks IMX6SL_CLK_USBPHY1>;
				clock-names = "main_clk";
			};

			snvs@020cc000 {
				compatible = "fsl,sec-v4.0-mon", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x020cc000 0x4000>;

				snvs-rtc-lp@34 {
					compatible = "fsl,sec-v4.0-mon-rtc-lp";
					reg = <0x34 0x58>;
					interrupts = <0 19 0x04 0 20 0x04>;
				};
			};

			epit1: epit@020d0000 {
				reg = <0x020d0000 0x4000>;
				interrupts = <0 56 0x04>;
			};

			epit2: epit@020d4000 {
				reg = <0x020d4000 0x4000>;
				interrupts = <0 57 0x04>;
			};

			src: src@020d8000 {
				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
				reg = <0x020d8000 0x4000>;
				interrupts = <0 91 0x04 0 96 0x04>;
				#reset-cells = <1>;
			};

			ocrams: sram@00900000 {
				compatible = "fsl,lpm-sram";
				reg = <0x00900000 0x4000>;
				clocks = <&clks IMX6SL_CLK_OCRAM>;
				clock-names = "ocram";
			};

			ocrams_ddr: sram@00904000 {
				compatible = "fsl,ddr-lpm-sram";
				reg = <0x00904000 0x1000>;
				clocks = <&clks IMX6SL_CLK_OCRAM>;
				clock-names = "ocram";
			};

			ocram: sram@00905000 {
				compatible = "mmio-sram";
				reg = <0x00905000 0x1B000>;
				clocks = <&clks IMX6SL_CLK_OCRAM>;
				clock-names = "ocram";
			};

			gpc: gpc@020dc000 {
				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
				reg = <0x020dc000 0x4000>;
				interrupts = <0 89 0x04>;
				clocks = <&clks IMX6SL_CLK_GPU2D_PODF>, <&clks IMX6SL_CLK_GPU2D_OVG>,
					<&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_LCDIF_AXI>,
					<&clks IMX6SL_CLK_LCDIF_PIX>, <&clks IMX6SL_CLK_EPDC_AXI>,
					<&clks IMX6SL_CLK_EPDC_PIX>, <&clks IMX6SL_CLK_PXP_AXI>;
				clock-names = "gpu2d_podf", "gpu2d_ovg", "ipg", "lcd_axi",
						"lcd_pix", "epdc_axi", "epdc_pix", "pxp_axi";
				pu-supply = <&reg_pu>;
			};

			gpr: iomuxc-gpr@020e0000 {
				compatible = "fsl,imx6sl-iomuxc-gpr", "syscon";
				reg = <0x020e0000 0x38>;
			};

			iomuxc: iomuxc@020e0000 {
				compatible = "fsl,imx6sl-iomuxc";
				reg = <0x020e0000 0x4000>;
			};

			csi1: csi@020e4000 {
				compatible = "fsl,imx6sl-csi";
				reg = <0x020e4000 0x4000>;
				interrupts = <0 7 0x04>;
				clocks = <&clks IMX6SL_CLK_DUMMY>,
					<&clks IMX6SL_CLK_DUMMY>,
					<&clks IMX6SL_CLK_DUMMY>;
				clock-names = "disp-axi", "csi_mclk", "dcic";
				status = "disabled";
			};

			spdc: spdc@020e8000 {
				reg = <0x020e8000 0x4000>;
				interrupts = <0 6 0x04>;
			};

			sdma: sdma@020ec000 {
				compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
				reg = <0x020ec000 0x4000>;
				interrupts = <0 2 0x04>;
				clocks = <&clks IMX6SL_CLK_SDMA>,
					 <&clks IMX6SL_CLK_SDMA>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				iram = <&ocram>;
				/* imx6sl reuses imx6q sdma firmware */
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
			};

			pxp: pxp@020f0000 {
				compatible = "fsl,imx6sl-pxp-dma", "fsl,imx6dl-pxp-dma";
				reg = <0x020f0000 0x4000>;
				interrupts = <0 98 0x04>;
				clocks = <&clks IMX6SL_CLK_PXP_AXI>, <&clks IMX6SL_CLK_DUMMY>;
				clock-names = "pxp-axi", "disp-axi";
				status = "disabled";
			};

			epdc: epdc@020f4000 {
				compatible = "fsl,imx6sl-epdc", "fsl,imx6dl-epdc";
				reg = <0x020f4000 0x4000>;
				interrupts = <0 97 0x04>;
				clocks = <&clks IMX6SL_CLK_EPDC_AXI>,
					 <&clks IMX6SL_CLK_EPDC_PIX>;
				clock-names = "epdc_axi", "epdc_pix";
			};

			lcdif: lcdif@020f8000 {
				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
				reg = <0x020f8000 0x4000>;
				interrupts = <0 39 0x04>;
				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
					 <&clks IMX6SL_CLK_LCDIF_AXI>,
					 <&clks IMX6SL_CLK_DUMMY>;
				clock-names = "pix", "axi", "disp_axi";
				status = "disabled";
			};

			dcp: dcp@020fc000 {
				reg = <0x020fc000 0x4000>;
				interrupts = <0 99 0x04>;
			};
		};

		aips2: aips-bus@02100000 {
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x02100000 0x100000>;
			ranges;

			usbotg1: usb@02184000 {
				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
				reg = <0x02184000 0x200>;
				interrupts = <0 43 0x04>;
				clocks = <&clks IMX6SL_CLK_USBOH3>;
				fsl,usbphy = <&usbphy1>;
				fsl,usbmisc = <&usbmisc 0>;
				fsl,anatop = <&anatop>;
				status = "disabled";
			};

			usbotg2: usb@02184200 {
				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
				reg = <0x02184200 0x200>;
				interrupts = <0 42 0x04>;
				clocks = <&clks IMX6SL_CLK_USBOH3>;
				fsl,usbphy = <&usbphy2>;
				fsl,usbmisc = <&usbmisc 1>;
				status = "disabled";
			};

			usbh: usb@02184400 {
				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
				reg = <0x02184400 0x200>;
				interrupts = <0 40 0x04>;
				clocks = <&clks IMX6SL_CLK_USBOH3>;
				fsl,usbmisc = <&usbmisc 2>;
				phy_type = "hsic";
				fsl,usbphy = <&usbphy_nop1>;
				fsl,anatop = <&anatop>;
				status = "disabled";
			};

			usbmisc: usbmisc@02184800 {
				#index-cells = <1>;
				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
				reg = <0x02184800 0x200>;
				clocks = <&clks IMX6SL_CLK_USBOH3>;
				vbus-wakeup-supply = <&reg_vbus_wakeup>;
			};

			fec: ethernet@02188000 {
				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
				reg = <0x02188000 0x4000>;
				interrupts = <0 114 0x04>;
				clocks = <&clks IMX6SL_CLK_ENET>,
					 <&clks IMX6SL_CLK_ENET_REF>;
				clock-names = "ipg", "ahb";
				status = "disabled";
			};

			usdhc1: usdhc@02190000 {
				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
				reg = <0x02190000 0x4000>;
				interrupts = <0 22 0x04>;
				clocks = <&clks IMX6SL_CLK_USDHC1>,
					 <&clks IMX6SL_CLK_USDHC1>,
					 <&clks IMX6SL_CLK_USDHC1>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			usdhc2: usdhc@02194000 {
				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
				reg = <0x02194000 0x4000>;
				interrupts = <0 23 0x04>;
				clocks = <&clks IMX6SL_CLK_USDHC2>,
					 <&clks IMX6SL_CLK_USDHC2>,
					 <&clks IMX6SL_CLK_USDHC2>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			usdhc3: usdhc@02198000 {
				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
				reg = <0x02198000 0x4000>;
				interrupts = <0 24 0x04>;
				clocks = <&clks IMX6SL_CLK_USDHC3>,
					 <&clks IMX6SL_CLK_USDHC3>,
					 <&clks IMX6SL_CLK_USDHC3>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			usdhc4: usdhc@0219c000 {
				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
				reg = <0x0219c000 0x4000>;
				interrupts = <0 25 0x04>;
				clocks = <&clks IMX6SL_CLK_USDHC4>,
					 <&clks IMX6SL_CLK_USDHC4>,
					 <&clks IMX6SL_CLK_USDHC4>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			i2c1: i2c@021a0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
				reg = <0x021a0000 0x4000>;
				interrupts = <0 36 0x04>;
				clocks = <&clks IMX6SL_CLK_I2C1>;
				status = "disabled";
			};

			i2c2: i2c@021a4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
				reg = <0x021a4000 0x4000>;
				interrupts = <0 37 0x04>;
				clocks = <&clks IMX6SL_CLK_I2C2>;
				status = "disabled";
			};

			i2c3: i2c@021a8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
				reg = <0x021a8000 0x4000>;
				interrupts = <0 38 0x04>;
				clocks = <&clks IMX6SL_CLK_I2C3>;
				status = "disabled";
			};

			mmdc: mmdc@021b0000 {
				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
				reg = <0x021b0000 0x4000>;
			};

			rng: rng@021b4000 {
				compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
				reg = <0x021b4000 0x4000>;
				interrupts = <0 5 0x04>;
				clocks = <&clks IMX6SL_CLK_DUMMY>;
			};

			weim: weim@021b8000 {
				reg = <0x021b8000 0x4000>;
				interrupts = <0 14 0x04>;
			};

			ocotp: ocotp-ctrl@021bc000 {
				compatible = "syscon";
				reg = <0x021bc000 0x4000>;
				clocks = <&clks IMX6SL_CLK_OCOTP>;
			};

			ocotp-fuse@021bc000 {
				compatible = "fsl,imx6sl-ocotp", "fsl,imx6q-ocotp";
				reg = <0x021bc000 0x4000>;
				clocks = <&clks IMX6SL_CLK_OCOTP>;
			};

			audmux: audmux@021d8000 {
				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
				reg = <0x021d8000 0x4000>;
				status = "disabled";
			};

			gpu: gpu@02200000 {
				compatible = "fsl,imx6sl-gpu", "fsl,imx6q-gpu";
				reg = <0x02200000 0x4000>, <0x02204000 0x4000>,
					  <0x80000000 0x0>;
				reg-names = "iobase_2d", "iobase_vg",
						"phys_baseaddr";
				interrupts = <0 10 0x04>, <0 11 0x04>;
				interrupt-names = "irq_2d", "irq_vg";
				clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
						<&clks IMX6SL_CLK_MMDC_ROOT>,
						<&clks IMX6SL_CLK_GPU2D_OVG>;
				clock-names = "gpu2d_axi_clk", "openvg_axi_clk",
						  "gpu2d_clk";
				resets = <&src 3>, <&src 3>;
				reset-names = "gpu2d", "gpuvg";
				pu-supply = <&reg_pu>;
			};

		};
	};
};

&iomuxc {
	audmux {
		pinctrl_audmux_1: audmux-1 {
			fsl,pins = <
				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130B0
				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130B0
				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110B0
				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130B0
				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130B0
			>;
		};
	};

	csi1 {
		pinctrl_csi_0: csigrp-0 {
			fsl,pins = <
				MX6SL_PAD_EPDC_GDRL__CSI_MCLK	0x110b0
				MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x110b0
				MX6SL_PAD_EPDC_GDSP__CSI_VSYNC	0x110b0
				MX6SL_PAD_EPDC_GDOE__CSI_HSYNC	0x110b0
				MX6SL_PAD_EPDC_SDLE__CSI_DATA09	0x110b0
				MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110b0
				MX6SL_PAD_EPDC_D7__CSI_DATA07	0x110b0
				MX6SL_PAD_EPDC_D6__CSI_DATA06	0x110b0
				MX6SL_PAD_EPDC_D5__CSI_DATA05	0x110b0
				MX6SL_PAD_EPDC_D4__CSI_DATA04	0x110b0
				MX6SL_PAD_EPDC_D3__CSI_DATA03	0x110b0
				MX6SL_PAD_EPDC_D2__CSI_DATA02	0x110b0
				MX6SL_PAD_EPDC_D1__CSI_DATA01	0x110b0
				MX6SL_PAD_EPDC_D0__CSI_DATA00	0x110b0
				MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000
				MX6SL_PAD_EPDC_SDOE__GPIO1_IO25	 0x80000000
			>;
		};
	};

	ecspi1 {
		pinctrl_ecspi1_1: ecspi1grp-1 {
			fsl,pins = <
				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
			>;
		};
	};

	epdc {
		pinctrl_epdc_0: epdcgrp-0 {
			fsl,pins = <
				MX6SL_PAD_EPDC_D0__EPDC_DATA00	0x80000000
				MX6SL_PAD_EPDC_D1__EPDC_DATA01	0x80000000
				MX6SL_PAD_EPDC_D2__EPDC_DATA02	0x80000000
				MX6SL_PAD_EPDC_D3__EPDC_DATA03	0x80000000
				MX6SL_PAD_EPDC_D4__EPDC_DATA04	0x80000000
				MX6SL_PAD_EPDC_D5__EPDC_DATA05	0x80000000
				MX6SL_PAD_EPDC_D6__EPDC_DATA06	0x80000000
				MX6SL_PAD_EPDC_D7__EPDC_DATA07	0x80000000
				MX6SL_PAD_EPDC_D8__EPDC_DATA08	0x80000000
				MX6SL_PAD_EPDC_D9__EPDC_DATA09	0x80000000
				MX6SL_PAD_EPDC_D10__EPDC_DATA10	0x80000000
				MX6SL_PAD_EPDC_D11__EPDC_DATA11	0x80000000
				MX6SL_PAD_EPDC_D12__EPDC_DATA12	0x80000000
				MX6SL_PAD_EPDC_D13__EPDC_DATA13	0x80000000
				MX6SL_PAD_EPDC_D14__EPDC_DATA14	0x80000000
				MX6SL_PAD_EPDC_D15__EPDC_DATA15	0x80000000
				MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x80000000
				MX6SL_PAD_EPDC_GDSP__EPDC_GDSP	 0x80000000
				MX6SL_PAD_EPDC_GDOE__EPDC_GDOE	 0x80000000
				MX6SL_PAD_EPDC_GDRL__EPDC_GDRL	 0x80000000
				MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x80000000
				MX6SL_PAD_EPDC_SDOE__EPDC_SDOE	 0x80000000
				MX6SL_PAD_EPDC_SDLE__EPDC_SDLE	 0x80000000
				MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x80000000
				MX6SL_PAD_EPDC_BDR0__EPDC_BDR0	 0x80000000
				MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x80000000
				MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x80000000
				MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x80000000
			>;
		};
	};

	fec {
		pinctrl_fec_1: fecgrp-1 {
			fsl,pins = <
				MX6SL_PAD_FEC_MDC__FEC_MDC         0x1b0b0
				MX6SL_PAD_FEC_MDIO__FEC_MDIO       0x1b0b0
				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV    0x1b0b0
				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0   0x1b0b0
				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1   0x1b0b0
				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN     0x1b0b0
				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0   0x1b0b0
				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1   0x1b0b0
				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
			>;
		};

		pinctrl_fec_1_sleep: fecgrp-1-sleep {
			fsl,pins = <
				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
			>;
		};
	};

	i2c1 {
		pinctrl_i2c1_1: i2c1grp-1 {
			fsl,pins = <
				MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
				MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
			>;
		};
	};

	i2c2 {
		pinctrl_i2c2_1: i2c2grp-1 {
			fsl,pins = <
				MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1
				MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
			>;
		};
	};

	i2c3 {
		pinctrl_i2c3_1: i2c3grp-1 {
			fsl,pins = <
				MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x4001b8b1
				MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x4001b8b1
			>;
		};
	};

	kpp {
		pinctrl_kpp_1: kpp_grp_1 {
			fsl,pins = <
				MX6SL_PAD_KEY_ROW0__KEY_ROW0      0x1b010
				MX6SL_PAD_KEY_ROW1__KEY_ROW1      0x1b010
				MX6SL_PAD_KEY_ROW2__KEY_ROW2      0x1b0b0
				MX6SL_PAD_KEY_COL0__KEY_COL0      0x110b0
				MX6SL_PAD_KEY_COL1__KEY_COL1      0x110b0
				MX6SL_PAD_KEY_COL2__KEY_COL2      0x110b0
			>;
		};

		pinctrl_kpp_1_sleep: kpp_grp_1_sleep {
			fsl,pins = <
				MX6SL_PAD_KEY_ROW0__GPIO3_IO25    0x3080
				MX6SL_PAD_KEY_ROW1__GPIO3_IO27    0x3080
				MX6SL_PAD_KEY_ROW2__GPIO3_IO29    0x3080
				MX6SL_PAD_KEY_COL0__GPIO3_IO24    0x3080
				MX6SL_PAD_KEY_COL1__GPIO3_IO26    0x3080
				MX6SL_PAD_KEY_COL2__GPIO3_IO28    0x3080
			>;
		};
	};

	lcdif {
		pinctrl_lcdif_dat_0: lcdifdatgrp-0 {
			fsl,pins = <
				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
			>;
		};

		pinctrl_lcdif_ctrl_0: lcdifctrlgrp-0 {
			fsl,pins = <
				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
			>;
		};
	};

	pwm1 {
		pinctrl_pwm1_0: pwm1grp-0 {
			fsl,pins = <
				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
			>;
		};

		pinctrl_pwm1_0_sleep: pwm1grp-0-sleep {
			fsl,pins = <
				MX6SL_PAD_PWM1__GPIO3_IO23 0x3080
			>;
		};
	};

	spdif {
		pinctrl_spdif_1: spdifgrp-1 {
			fsl,pins = <
				MX6SL_PAD_SD2_DAT4__SPDIF_OUT 0x80000000
			>;
		};
	};

	uart1 {
		pinctrl_uart1_1: uart1grp-1 {
			fsl,pins = <
				MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
				MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
			>;
		};
	};

	uart4 {
		pinctrl_uart4_1: uart4grp-1 {
			fsl,pins = <
				MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x1b0b1
				MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x1b0b1
				MX6SL_PAD_SD1_DAT7__UART4_CTS_B   0x1b0b1
				MX6SL_PAD_SD1_DAT6__UART4_RTS_B   0x1b0b1
			>;
		};

		pinctrl_uart4dte_1: uart4dtegrp-1 {
			fsl,pins = <
				MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x1b0b1
				MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x1b0b1
				MX6SL_PAD_SD1_DAT6__UART4_CTS_B   0x1b0b1
				MX6SL_PAD_SD1_DAT7__UART4_RTS_B   0x1b0b1
			>;
		};
	};

	usbotg1 {
		pinctrl_usbotg1_1: usbotg1grp-1 {
			fsl,pins = <
				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
			>;
		};

		pinctrl_usbotg1_2: usbotg1grp-2 {
			fsl,pins = <
				MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
			>;
		};

		pinctrl_usbotg1_3: usbotg1grp-3 {
			fsl,pins = <
				MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
			>;
		};

		pinctrl_usbotg1_4: usbotg1grp-4 {
			fsl,pins = <
				MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
			>;
		};

		pinctrl_usbotg1_5: usbotg1grp-5 {
			fsl,pins = <
				MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
			>;
		};
	};

	usbotg2 {
		pinctrl_usbotg2_1: usbotg2grp-1 {
			fsl,pins = <
				MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
			>;
		};

		pinctrl_usbotg2_2: usbotg2grp-2 {
			fsl,pins = <
				MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
			>;
		};

		pinctrl_usbotg2_3: usbotg2grp-3 {
			fsl,pins = <
				MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
			>;
		};

		pinctrl_usbotg2_4: usbotg2grp-4 {
			fsl,pins = <
				MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
			>;
		};
	};

	usdhc1 {
		pinctrl_usdhc1_1: usdhc1grp-1 {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD    0x17059
				MX6SL_PAD_SD1_CLK__SD1_CLK    0x10059
				MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
				MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
				MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
				MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
				MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
				MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
				MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
				MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
			>;
		};

		pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
				MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
				MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
				MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
				MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
				MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
				MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
				MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
				MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
				MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
			>;
		};

		pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
				MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
				MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
				MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
				MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
				MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
				MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
				MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
				MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
				MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
			>;
		};

	};

	usdhc2 {
		pinctrl_usdhc2_1: usdhc2grp-1 {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD    0x17059
				MX6SL_PAD_SD2_CLK__SD2_CLK    0x10059
				MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
				MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
				MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
				MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
			>;
		};

		pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
				MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
				MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
				MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
				MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
				MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
			>;
		};

		pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
				MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
				MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
				MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
				MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
				MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
			>;
		};
	};

	usdhc3 {
		pinctrl_usdhc3_1: usdhc3grp-1 {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD    0x17059
				MX6SL_PAD_SD3_CLK__SD3_CLK    0x10059
				MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
				MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
				MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
				MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
			>;
		};

		pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
				MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
				MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
				MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
				MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
				MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
			>;
		};

		pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
				MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
				MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
				MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
				MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
				MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
			>;
		};

	};
};