/*
 * Board specific setup info
 *
 * (C) Copyright 2004
 * Texas Instruments, <www.ti.com>
 * Richard Woodruff <r-woodruff2@ti.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <asm/arch/omap2420.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks.h>

_TEXT_BASE:
	.word	TEXT_BASE	/* sdram load addr from config.mk */

#ifdef CONFIG_PARTIAL_SRAM

/**************************************************************************
 * cpy_clk_code: relocates clock code into SRAM where its safer to execute
 * R1 = SRAM destination address.
 *************************************************************************/
.global cpy_clk_code
 cpy_clk_code:
        /* Copy DPLL code into SRAM */ 
        adr     r0, go_to_speed         /* get addr of clock setting code */
        mov     r2, #384                /* r2 size to copy (div by 32 bytes) */
        mov     r1, r1                  /* r1 <- dest address (passed in) */
        add     r2, r2, r0              /* r2 <- source end address */
next2:
        ldmia   r0!, {r3-r10}           /* copy from source address [r0]    */
        stmia   r1!, {r3-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        bne     next2
	mov	pc, lr                  /* back to caller */

/* **************************************************************************** 
 *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
 *               -executed from SRAM.
 *  R0 = PRCM_CLKCFG_CTRL - addr of valid reg
 *  R1 = CM_CLKEN_PLL - addr dpll ctlr reg
 *  R2 = dpll value
 *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
 ******************************************************************************/    
.global go_to_speed
 go_to_speed:
        sub     sp, sp, #0x4 /* get some stack space */
        str     r4, [sp]     /* save r4's value */

        /* move into fast relock bypass */
        ldr     r8, pll_ctl_add
        mov     r4, #0x2
        str     r4, [r8]
        ldr     r4, pll_stat
block:
        ldr     r8, [r4]	/* wait for bypass to take effect */
        and     r8, r8, #0x3
        cmp     r8, #0x1
        bne     block

	/* set new dpll dividers _after_ in bypass */
	ldr     r4, pll_div_add
	ldr     r8, pll_div_val
        str     r8, [r4]
    
        /* now prepare GPMC (flash) for new dpll speed */
	/* flash needs to be stable when we jump back to it */
        ldr     r4, cfg3_0_addr
        ldr     r8, cfg3_0_val
        str     r8, [r4]
        ldr     r4, cfg4_0_addr
        ldr     r8, cfg4_0_val
        str     r8, [r4]
        ldr     r4, cfg1_0_addr
        ldr     r8, [r4]
        orr     r8, r8, #0x3     /* up gpmc divider */
        str     r8, [r4]

	/* setup to 2x loop though code.  The first loop pre-loads the 
         * icache, the 2nd commits the prcm config, and locks the dpll
         */
        mov     r4, #0x1000      /* spin spin spin */
        mov     r8, #0x4         /* first pass condition & set registers */
        cmp     r8, #0x4
2:
        ldrne   r8, [r3]         /* DPLL lock check */
        and     r8, r8, #0x7
        cmp     r8, #0x2
        beq     4f
3:
        subeq   r8, r8, #0x1
        streq   r8, [r0]         /* commit dividers (2nd time) */
        nop
lloop1:
        sub     r4, r4, #0x1    /* Loop currently necessary else bad jumps */
        nop
        cmp     r4, #0x0
        bne     lloop1
        mov     r4, #0x40000
        cmp     r8, #0x1
        nop
        streq   r2, [r1]        /* lock dpll (2nd time) */
        nop
lloop2:
        sub     r4, r4, #0x1    /* loop currently necessary else bad jumps */
        nop
        cmp     r4, #0x0
        bne     lloop2
        mov     r4, #0x40000
        cmp     r8, #0x1
        nop
        ldreq   r8, [r3]         /* get lock condition for dpll */
        cmp     r8, #0x4         /* first time though? */
        bne     2b
        moveq   r8, #0x2         /* set to dpll check condition. */
        beq     3b               /* if condition not true branch */
4:  
        ldr     r4, [sp]
        add     sp, sp, #0x4     /* return stack space */
        mov     pc, lr           /* back to caller, locked */        

_go_to_speed: .word go_to_speed

/* these constants need to be close for PIC code */
cfg3_0_addr:
    .word  GPMC_CONFIG3_0
cfg3_0_val: 
    .word  SMNAND_GPMC_CONFIG3
cfg4_0_addr:
    .word  GPMC_CONFIG4_0
cfg4_0_val:
    .word  SMNAND_GPMC_CONFIG4
cfg1_0_addr:
    .word  GPMC_CONFIG1_0
pll_ctl_add:
    .word CM_CLKEN_PLL
pll_stat:
    .word CM_IDLEST_CKGEN
pll_div_add:
    .word CM_CLKSEL1_PLL 
pll_div_val:
    .word DPLL_VAL	/* DPLL setting (300MHz default) */
#endif            

.globl platformsetup
platformsetup:
	mov r3, r0     /* save skip information */
#ifdef CONFIG_APTIX
	ldr	r0,	REG_SDRC_MCFG_0
	ldr	r1,	VAL_SDRC_MCFG_0
	str	r1,	[r0]
	ldr	r0,	REG_SDRC_MR_0
	ldr	r1,	VAL_SDRC_MR_0
	str	r1,	[r0]
	/* a ddr needs emr1 set here */
	ldr	r0,	REG_SDRC_SHARING
	ldr	r1,	VAL_SDRC_SHARING
	str	r1,	[r0]
       	ldr	r0,	REG_SDRC_RFR_CTRL_0
	ldr	r1,	VAL_SDRC_RFR_CTRL_0
	str	r1,	[r0]

       /* little delay after init */
       mov r2, #0x1800                        
1:       
        subs r2, r2, #0x1
        bne 1b
#endif
#ifdef CONFIG_PARTIAL_SRAM
	ldr	sp,	SRAM_STACK
        str     ip,	[sp]    /* stash old link register */
	mov	ip,	lr	/* save link reg across call */
        mov     r0,     r3      /* pass skip info to s_init */
        bl      s_init          /* go setup pll,mux,memory */
        ldr     ip,	[sp]    /* restore save ip */
	mov	lr,	ip	/* restore link reg */
#endif

	/* map interrupt controller */
	ldr	r0,	VAL_INTH_SETUP
	mcr	p15, 0, r0, c15, c2, 4

	/* back to arch calling code */
	mov	pc,	lr

	/* the literal pools origin */
	.ltorg

REG_CONTROL_STATUS:
	.word CONTROL_STATUS
VAL_INTH_SETUP:
	.word PERIFERAL_PORT_BASE
SRAM_STACK:
	.word LOW_LEVEL_SRAM_STACK