| iMX6q/iMX6dl/iMX6sl specific CPUFREQ settings | |
| iMX6q/iMX6dl/iMX6sl has limitation that a couple of voltage rails (VDDSOC_CAP and VDDPU_CAP) | |
| must track VDDARM_CAP within 50mV: | |
| VDDARM_CAP - VDDSOC_CAP/VDDPU_CAP <= 50mV | |
| The VDDSOC_CAP and VDDPU_CAP operating points for various VDDARM_CAP settings are listed below. | |
| Required properties: | |
| - fsl,soc-operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt | |
| for details. It is a voltage frequency tuple. | |
| - For other entries in the example below please refer to Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | |
| Examples: | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| compatible = "arm,cortex-a9"; | |
| reg = <0>; | |
| next-level-cache = <&L2>; | |
| operating-points = < | |
| /* kHz uV */ | |
| 1200000 1275000 | |
| 996000 1250000 | |
| 792000 1175000 | |
| 396000 1075000 | |
| >; | |
| fsl,soc-operating-points = < | |
| /* ARM kHz SOC-PU uV */ | |
| 1200000 1275000 | |
| 996000 1250000 | |
| 792000 1175000 | |
| 396000 1175000 | |
| >; | |
| clock-latency = <61036>; /* two CLK32 periods */ | |
| }; | |
| cpu@1 { | |
| compatible = "arm,cortex-a9"; | |
| reg = <1>; | |
| next-level-cache = <&L2>; | |
| }; | |
| cpu@2 { | |
| compatible = "arm,cortex-a9"; | |
| reg = <2>; | |
| next-level-cache = <&L2>; | |
| }; | |
| cpu@3 { | |
| compatible = "arm,cortex-a9"; | |
| reg = <3>; | |
| next-level-cache = <&L2>; | |
| }; | |
| }; |