/*
 * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include "skeleton.dtsi"

/ {
	aliases {
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
	};

	avic: avic-interrupt-controller@60000000 {
		compatible = "fsl,imx31-avic", "fsl,avic";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0x60000000 0x100000>;
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&avic>;
		ranges;

		aips@43f00000 { /* AIPS1 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x43f00000 0x100000>;
			ranges;

			uart1: serial@43f90000 {
				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
				reg = <0x43f90000 0x4000>;
				interrupts = <45>;
				clocks = <&clks 10>, <&clks 30>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart2: serial@43f94000 {
				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
				reg = <0x43f94000 0x4000>;
				interrupts = <32>;
				clocks = <&clks 10>, <&clks 31>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart4: serial@43fb0000 {
				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
				reg = <0x43fb0000 0x4000>;
				clocks = <&clks 10>, <&clks 49>;
				clock-names = "ipg", "per";
				interrupts = <46>;
				status = "disabled";
			};

			uart5: serial@43fb4000 {
				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
				reg = <0x43fb4000 0x4000>;
				interrupts = <47>;
				clocks = <&clks 10>, <&clks 50>;
				clock-names = "ipg", "per";
				status = "disabled";
			};
		};

		spba@50000000 {
			compatible = "fsl,spba-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x50000000 0x100000>;
			ranges;

			uart3: serial@5000c000 {
				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
				reg = <0x5000c000 0x4000>;
				interrupts = <18>;
				clocks = <&clks 10>, <&clks 48>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			clks: ccm@53f80000{
				compatible = "fsl,imx31-ccm";
				reg = <0x53f80000 0x4000>;
				interrupts = <0 31 0x04 0 53 0x04>;
				#clock-cells = <1>;
			};
		};

		aips@53f00000 { /* AIPS2 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x53f00000 0x100000>;
			ranges;

			gpt: timer@53f90000 {
				compatible = "fsl,imx31-gpt";
				reg = <0x53f90000 0x4000>;
				interrupts = <29>;
				clocks = <&clks 10>, <&clks 22>;
				clock-names = "ipg", "per";
			};
		};
	};
};