
/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include "imx6dl-pinfunc.h"
#include "imx6qdl.dtsi"

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "arm,cortex-a9";
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2>;
			operating-points = <
				/* kHz    uV */
				996000  1275000
				792000  1175000
				396000  1150000
			>;
			fsl,soc-operating-points = <
				/* ARM kHz      SOC-PU uV */
				996000            1175000
				792000            1175000
				396000            1175000
			>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
				 <&clks 17>, <&clks 170>;
			clock-names = "arm", "pll2_pfd2_396m", "step",
				      "pll1_sw", "pll1_sys";
			arm-supply = <&reg_arm>;
			pu-supply = <&reg_pu>;
			soc-supply = <&reg_soc>;
		};

		cpu@1 {
			compatible = "arm,cortex-a9";
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2>;
		};
	};

	soc {

		busfreq { /* BUSFREQ */
			compatible = "fsl,imx6_busfreq";
			clocks = <&clks 171>, <&clks 6>, <&clks 11>, <&clks 104>, <&clks 172>, <&clks 58>,
				<&clks 18>, <&clks 60>, <&clks 20>, <&clks 3>, <&clks 230>, <&clks 22> , <&clks 8>;
			clock-names = "pll2_bus", "pll2_pfd2_396m", "pll2_198m", "arm", "pll3_usb_otg", "periph",
				"periph_pre", "periph_clk2", "periph_clk2_sel", "osc", "axi_alt_sel", "axi_sel", "pll3_pfd1_540m";
			interrupts = <0 107 0x04>, <0 112 0x4>;
			interrupt-names = "irq_busfreq_0", "irq_busfreq_1";
			fsl,max_ddr_freq = <400000000>;
		};

		gpu: gpu@00130000 {
			compatible = "fsl,imx6dl-gpu", "fsl,imx6q-gpu";
			reg = <0x00130000 0x4000>, <0x00134000 0x4000>,
			      <0x0 0x0>;
			reg-names = "iobase_3d", "iobase_2d",
				    "phys_baseaddr";
			interrupts = <0 9 0x04>, <0 10 0x04>;
			interrupt-names = "irq_3d", "irq_2d";
			clocks = <&clks 143>, <&clks 27>,
				 <&clks 121>, <&clks 122>,
				 <&clks 0>;
			clock-names = "gpu2d_axi_clk", "gpu3d_axi_clk",
				      "gpu2d_clk", "gpu3d_clk",
				      "gpu3d_shader_clk";
			resets = <&src 0>, <&src 3>;
			reset-names = "gpu3d", "gpu2d";
			pu-supply = <&reg_pu>;
		};

		ocrams: sram@00900000 {
			compatible = "fsl,lpm-sram";
			reg = <0x00900000 0x4000>;
			clocks = <&clks 142>;
		};

		ocrams_ddr: sram@00904000 {
			compatible = "fsl,ddr-lpm-sram";
			reg = <0x00904000 0x1000>;
			clocks = <&clks 142>;
		};

		ocram: sram@00905000 {
			compatible = "mmio-sram";
			reg = <0x00905000 0x1B000>;
			clocks = <&clks 142>;
		};

		hdmi_core: hdmi_core@00120000 {
			compatible = "fsl,imx6dl-hdmi-core";
			reg = <0x00120000 0x9000>;
			clocks = <&clks 124>, <&clks 123>, <&clks 138>;
			clock-names = "hdmi_isfr", "hdmi_iahb", "mipi_core";
			status = "disabled";
		};

		hdmi_video: hdmi_video@020e0000 {
			compatible = "fsl,imx6dl-hdmi-video";
			reg =  <0x020e0000 0x1000>;
			reg-names = "hdmi_gpr";
			interrupts = <0 115 0x04>;
			clocks = <&clks 124>, <&clks 123>, <&clks 138>;
			clock-names = "hdmi_isfr", "hdmi_iahb", "mipi_core";
			status = "disabled";
		};

		hdmi_audio: hdmi_audio@00120000 {
			compatible = "fsl,imx6dl-hdmi-audio";
			clocks = <&clks 124>, <&clks 123>, <&clks 138>;
			clock-names = "hdmi_isfr", "hdmi_iahb", "mipi_core";
			dmas = <&sdma 2 22 0>;
			dma-names = "tx";
			status = "disabled";
		};

		hdmi_cec: hdmi_cec@00120000 {
			compatible = "fsl,imx6dl-hdmi-cec";
			interrupts = <0 115 0x04>;
			status = "disabled";
		};

		aips1: aips-bus@02000000 {
			vpu@02040000 {
				iramsize = <0>;
				status = "okay";
			};

			iomuxc: iomuxc@020e0000 {
				compatible = "fsl,imx6dl-iomuxc";
			};

			dcic2: dcic@020e8000 {
				clocks = <&clks 232>, <&clks 231>; /* DCIC2 depend on DCIC1 clock in imx6dl*/
				clock-names = "dcic", "disp-axi";
			};

			pxp: pxp@020f0000 {
				compatible = "fsl,imx6dl-pxp-dma";
				reg = <0x020f0000 0x4000>;
				interrupts = <0 98 0x04>;
				clocks = <&clks 133>, <&clks 0>;
				clock-names = "pxp-axi", "disp-axi";
				status = "disabled";
			};

			epdc: epdc@020f4000 {
				compatible = "fsl,imx6dl-epdc";
				reg = <0x020f4000 0x4000>;
				interrupts = <0 97 0x04>;
				clocks = <&clks 133>, <&clks 137>;
				clock-names = "epdc_axi", "epdc_pix";
			};

			lcdif: lcdif@020f8000 {
				reg = <0x020f8000 0x4000>;
				interrupts = <0 39 0x04>;
			};
		};

		aips2: aips-bus@02100000 {
			mipi_dsi: mipi@021e0000 {
				compatible = "fsl,imx6dl-mipi-dsi";
				reg = <0x021e0000 0x4000>;
				interrupts = <0 102 0x04>;
				gpr = <&gpr>;
				clocks = <&clks 138>, <&clks 204>;
				clock-names = "mipi_pllref_clk", "mipi_cfg_clk";
				status = "disabled";
			};

			i2c4: i2c@021f8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx1-i2c";
				reg = <0x021f8000 0x4000>;
				interrupts = <0 35 0x04>;
				status = "disabled";
			};
		};
	};
};

&iomuxc {
	epdc {
		pinctrl_epdc_0: epdcgrp-0 {
			fsl,pins = <
				MX6QDL_PAD_EIM_A16__EPDC_DATA00	   0x80000000
				MX6QDL_PAD_EIM_DA10__EPDC_DATA01   0x80000000
				MX6QDL_PAD_EIM_DA12__EPDC_DATA02   0x80000000
				MX6QDL_PAD_EIM_DA11__EPDC_DATA03   0x80000000
				MX6QDL_PAD_EIM_LBA__EPDC_DATA04	   0x80000000
				MX6QDL_PAD_EIM_EB2__EPDC_DATA05	   0x80000000
				MX6QDL_PAD_EIM_CS0__EPDC_DATA06	   0x80000000
				MX6QDL_PAD_EIM_RW__EPDC_DATA07	   0x80000000
				MX6QDL_PAD_EIM_A21__EPDC_GDCLK	   0x80000000
				MX6QDL_PAD_EIM_A22__EPDC_GDSP	   0x80000000
				MX6QDL_PAD_EIM_A23__EPDC_GDOE	   0x80000000
				MX6QDL_PAD_EIM_A24__EPDC_GDRL	   0x80000000
				MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P   0x80000000
				MX6QDL_PAD_EIM_D27__EPDC_SDOE	   0x80000000
				MX6QDL_PAD_EIM_DA1__EPDC_SDLE	   0x80000000
				MX6QDL_PAD_EIM_EB1__EPDC_SDSHR	   0x80000000
				MX6QDL_PAD_EIM_DA2__EPDC_BDR0	   0x80000000
				MX6QDL_PAD_EIM_DA4__EPDC_SDCE0	   0x80000000
				MX6QDL_PAD_EIM_DA5__EPDC_SDCE1	   0x80000000
				MX6QDL_PAD_EIM_DA6__EPDC_SDCE2	   0x80000000
			>;
		};
	};
};

&ldb {
	compatible = "fsl,imx6dl-ldb", "fsl,imx53-ldb";

	clocks = <&clks 135>, <&clks 136>,
		 <&clks 39>, <&clks 40>,
		 <&clks 41>,
		 <&clks 184>, <&clks 185>,
		 <&clks 205>, <&clks 206>,
		 <&clks 207>, <&clks 208>;
	clock-names = "ldb_di0", "ldb_di1",
		      "di0_sel", "di1_sel",
		      "di2_sel",
		      "ldb_di0_div_3_5", "ldb_di1_div_3_5",
		      "ldb_di0_div_7", "ldb_di1_div_7",
		      "ldb_di0_div_sel", "ldb_di1_div_sel";
};