/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx6q.dtsi"

/ {
	model = "Freescale i.MX6 Quad Armadillo2 Board";
	compatible = "fsl,imx6q-arm2", "fsl,imx6q";

	memory {
		reg = <0x10000000 0x80000000>;
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: usb_otg_vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 0>;
			enable-active-high;
		};
	};

	leds {
		compatible = "gpio-leds";

		debug-led {
			label = "Heartbeat";
			gpios = <&gpio3 25 0>;
			linux,default-trigger = "heartbeat";
		};
	};

	sound-spdif {
		compatible = "fsl,imx-audio-spdif",
			   "fsl,imx-sabreauto-spdif";
		model = "imx-spdif";
		spdif-controller = <&spdif>;
		spdif-out;
		spdif-in;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet_2>;
	phy-mode = "rgmii";
	status = "okay";
};

&gpmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
	status = "disabled"; /* gpmi nand conflicts with SD */
	nand-on-flash-bbt;
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	hog {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
			>;
		};
	};

	arm2 {
		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
			fsl,pins = <
				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
			>;
		};
	};
};

&spdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spdif_2>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2_2>;
	fsl,dte-mode;
	fsl,uart-has-rtscts;
	dma-names = "rx", "tx";
	dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4_1>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg_1>;
	disable-over-current;
	status = "okay";
};

&usdhc3 {
	cd-gpios = <&gpio6 11 0>;
	wp-gpios = <&gpio6 14 0>;
	vmmc-supply = <&reg_3p3v>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3_1
		     &pinctrl_usdhc3_arm2>;
	status = "okay";
};

&usdhc4 {
	non-removable;
	vmmc-supply = <&reg_3p3v>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc4_1>;
	status = "okay";
};