/*
 * stmp378x: GPMI register definitions
 *
 * Copyright (c) 2008 Freescale Semiconductor
 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
#define REGS_GPMI_PHYS	0x8000C000
#define REGS_GPMI_SIZE	0x2000

#define HW_GPMI_CTRL0		0x0
#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
#define BP_GPMI_CTRL0_XFER_COUNT	0
#define BM_GPMI_CTRL0_CS	0x00300000
#define BP_GPMI_CTRL0_CS	20
#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
#define BP_GPMI_CTRL0_ADDRESS      17
#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
#define BP_GPMI_CTRL0_COMMAND_MODE	24
#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
#define BM_GPMI_CTRL0_RUN	0x20000000
#define BM_GPMI_CTRL0_CLKGATE	0x40000000
#define BM_GPMI_CTRL0_SFTRST	0x80000000
#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
#define BP_GPMI_ECCCTRL_ECC_CMD	13
#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3

#define HW_GPMI_CTRL1		0x60
#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
#define BP_GPMI_CTRL1_GPMI_MODE	0
#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
#define BP_GPMI_CTRL1_RDN_DELAY	12
#define BM_GPMI_CTRL1_BCH_MODE	0x00040000

#define HW_GPMI_TIMING0		0x70
#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
#define BP_GPMI_TIMING0_DATA_SETUP	0
#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
#define BP_GPMI_TIMING0_DATA_HOLD	8
#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
#define BP_GPMI_TIMING0_ADDRESS_SETUP	16

#define HW_GPMI_TIMING1		0x80
#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16