/*
 * ADIS16220 Programmable Digital Vibration Sensor driver
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

#include "adis16220.h"

static ssize_t adis16220_read_16bit(struct device *dev,
				    struct device_attribute *attr,
				    char *buf)
{
	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	struct adis16220_state *st = iio_priv(indio_dev);
	ssize_t ret;
	u16 val;

	/* Take the iio_dev status lock */
	mutex_lock(&indio_dev->mlock);
	ret = adis_read_reg_16(&st->adis, this_attr->address, &val);
	mutex_unlock(&indio_dev->mlock);
	if (ret)
		return ret;
	return sprintf(buf, "%u\n", val);
}

static ssize_t adis16220_write_16bit(struct device *dev,
				     struct device_attribute *attr,
				     const char *buf,
				     size_t len)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
	struct adis16220_state *st = iio_priv(indio_dev);
	int ret;
	u16 val;

	ret = kstrtou16(buf, 10, &val);
	if (ret)
		goto error_ret;
	ret = adis_write_reg_16(&st->adis, this_attr->address, val);

error_ret:
	return ret ? ret : len;
}

static int adis16220_capture(struct iio_dev *indio_dev)
{
	struct adis16220_state *st = iio_priv(indio_dev);
	int ret;

	 /* initiates a manual data capture */
	ret = adis_write_reg_16(&st->adis, ADIS16220_GLOB_CMD, 0xBF08);
	if (ret)
		dev_err(&indio_dev->dev, "problem beginning capture");

	usleep_range(10000, 11000); /* delay for capture to finish */

	return ret;
}

static ssize_t adis16220_write_capture(struct device *dev,
				       struct device_attribute *attr,
				       const char *buf, size_t len)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	bool val;
	int ret;

	ret = strtobool(buf, &val);
	if (ret)
		return ret;
	if (!val)
		return -EINVAL;
	ret = adis16220_capture(indio_dev);
	if (ret)
		return ret;

	return len;
}

static ssize_t adis16220_capture_buffer_read(struct iio_dev *indio_dev,
					     char *buf,
					     loff_t off,
					     size_t count,
					     int addr)
{
	struct adis16220_state *st = iio_priv(indio_dev);
	struct spi_transfer xfers[] = {
		{
			.tx_buf = st->tx,
			.bits_per_word = 8,
			.len = 2,
			.cs_change = 1,
			.delay_usecs = 25,
		}, {
			.tx_buf = st->tx,
			.rx_buf = st->rx,
			.bits_per_word = 8,
			.cs_change = 1,
			.delay_usecs = 25,
		},
	};
	int ret;
	int i;

	if (unlikely(!count))
		return count;

	if ((off >= ADIS16220_CAPTURE_SIZE) || (count & 1) || (off & 1))
		return -EINVAL;

	if (off + count > ADIS16220_CAPTURE_SIZE)
		count = ADIS16220_CAPTURE_SIZE - off;

	/* write the begin position of capture buffer */
	ret = adis_write_reg_16(&st->adis,
				ADIS16220_CAPT_PNTR,
				off > 1);
	if (ret)
		return -EIO;

	/* read count/2 values from capture buffer */
	mutex_lock(&st->buf_lock);

	for (i = 0; i < count; i += 2) {
		st->tx[i] = ADIS_READ_REG(addr);
		st->tx[i + 1] = 0;
	}
	xfers[1].len = count;

	ret = spi_sync_transfer(st->adis.spi, xfers, ARRAY_SIZE(xfers));
	if (ret) {
		mutex_unlock(&st->buf_lock);
		return -EIO;
	}

	memcpy(buf, st->rx, count);

	mutex_unlock(&st->buf_lock);
	return count;
}

static ssize_t adis16220_accel_bin_read(struct file *filp, struct kobject *kobj,
					struct bin_attribute *attr,
					char *buf,
					loff_t off,
					size_t count)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));

	return adis16220_capture_buffer_read(indio_dev, buf,
					off, count,
					ADIS16220_CAPT_BUFA);
}

static struct bin_attribute accel_bin = {
	.attr = {
		.name = "accel_bin",
		.mode = S_IRUGO,
	},
	.read = adis16220_accel_bin_read,
	.size = ADIS16220_CAPTURE_SIZE,
};

static ssize_t adis16220_adc1_bin_read(struct file *filp, struct kobject *kobj,
				       struct bin_attribute *attr,
				       char *buf, loff_t off,
				       size_t count)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));

	return adis16220_capture_buffer_read(indio_dev, buf,
					off, count,
					ADIS16220_CAPT_BUF1);
}

static struct bin_attribute adc1_bin = {
	.attr = {
		.name = "in0_bin",
		.mode = S_IRUGO,
	},
	.read =  adis16220_adc1_bin_read,
	.size = ADIS16220_CAPTURE_SIZE,
};

static ssize_t adis16220_adc2_bin_read(struct file *filp, struct kobject *kobj,
				       struct bin_attribute *attr,
				       char *buf, loff_t off,
				       size_t count)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));

	return adis16220_capture_buffer_read(indio_dev, buf,
					off, count,
					ADIS16220_CAPT_BUF2);
}

static struct bin_attribute adc2_bin = {
	.attr = {
		.name = "in1_bin",
		.mode = S_IRUGO,
	},
	.read =  adis16220_adc2_bin_read,
	.size = ADIS16220_CAPTURE_SIZE,
};

#define IIO_DEV_ATTR_CAPTURE(_store)				\
	IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)

static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);

#define IIO_DEV_ATTR_CAPTURE_COUNT(_mode, _show, _store, _addr)		\
	IIO_DEVICE_ATTR(capture_count, _mode, _show, _store, _addr)

static IIO_DEV_ATTR_CAPTURE_COUNT(S_IWUSR | S_IRUGO,
		adis16220_read_16bit,
		adis16220_write_16bit,
		ADIS16220_CAPT_PNTR);

enum adis16220_channel {
	in_supply, in_1, in_2, accel, temp
};

struct adis16220_address_spec {
	u8 addr;
	u8 bits;
	bool sign;
};

/* Address / bits / signed */
static const struct adis16220_address_spec adis16220_addresses[][3] = {
	[in_supply] =	{ { ADIS16220_CAPT_SUPPLY,	12, 0 }, },
	[in_1] =	{ { ADIS16220_CAPT_BUF1,	16, 1 },
			  { ADIS16220_AIN1_NULL,	16, 1 },
			  { ADIS16220_CAPT_PEAK1,	16, 1 }, },
	[in_2] =	{ { ADIS16220_CAPT_BUF2,	16, 1 },
			  { ADIS16220_AIN2_NULL,	16, 1 },
			  { ADIS16220_CAPT_PEAK2,	16, 1 }, },
	[accel] =	{ { ADIS16220_CAPT_BUFA,	16, 1 },
			  { ADIS16220_ACCL_NULL,	16, 1 },
			  { ADIS16220_CAPT_PEAKA,	16, 1 }, },
	[temp] =	{ { ADIS16220_CAPT_TEMP,	12, 0 }, }
};

static int adis16220_read_raw(struct iio_dev *indio_dev,
			      struct iio_chan_spec const *chan,
			      int *val, int *val2,
			      long mask)
{
	struct adis16220_state *st = iio_priv(indio_dev);
	const struct adis16220_address_spec *addr;
	int ret = -EINVAL;
	int addrind = 0;
	u16 uval;
	s16 sval;
	u8 bits;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		addrind = 0;
		break;
	case IIO_CHAN_INFO_OFFSET:
		if (chan->type == IIO_TEMP) {
			*val = 25000 / -470 - 1278; /* 25 C = 1278 */
			return IIO_VAL_INT;
		}
		addrind = 1;
		break;
	case IIO_CHAN_INFO_PEAK:
		addrind = 2;
		break;
	case IIO_CHAN_INFO_SCALE:
		switch (chan->type) {
		case IIO_TEMP:
			*val = -470; /* -0.47 C */
			*val2 = 0;
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_ACCEL:
			*val2 = IIO_G_TO_M_S_2(19073); /* 19.073 g */
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_VOLTAGE:
			if (chan->channel == 0) {
				*val = 1;
				*val2 = 220700; /* 1.2207 mV */
			} else {
				/* Should really be dependent on VDD */
				*val2 = 305180; /* 305.18 uV */
			}
			return IIO_VAL_INT_PLUS_MICRO;
		default:
			return -EINVAL;
		}
	default:
		return -EINVAL;
	}
	addr = &adis16220_addresses[chan->address][addrind];
	if (addr->sign) {
		ret = adis_read_reg_16(&st->adis, addr->addr, &sval);
		if (ret)
			return ret;
		bits = addr->bits;
		sval &= (1 << bits) - 1;
		sval = (s16)(sval << (16 - bits)) >> (16 - bits);
		*val = sval;
		return IIO_VAL_INT;
	}
	ret = adis_read_reg_16(&st->adis, addr->addr, &uval);
	if (ret)
		return ret;
	bits = addr->bits;
	uval &= (1 << bits) - 1;
	*val = uval;
	return IIO_VAL_INT;
}

static const struct iio_chan_spec adis16220_channels[] = {
	{
		.type = IIO_VOLTAGE,
		.indexed = 1,
		.channel = 0,
		.extend_name = "supply",
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_SCALE),
		.address = in_supply,
	}, {
		.type = IIO_ACCEL,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_OFFSET) |
			BIT(IIO_CHAN_INFO_SCALE) |
			BIT(IIO_CHAN_INFO_PEAK),
		.address = accel,
	}, {
		.type = IIO_TEMP,
		.indexed = 1,
		.channel = 0,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_OFFSET) |
			BIT(IIO_CHAN_INFO_SCALE),
		.address = temp,
	}, {
		.type = IIO_VOLTAGE,
		.indexed = 1,
		.channel = 1,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
			BIT(IIO_CHAN_INFO_OFFSET) |
			BIT(IIO_CHAN_INFO_SCALE),
		.address = in_1,
	}, {
		.type = IIO_VOLTAGE,
		.indexed = 1,
		.channel = 2,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
		.address = in_2,
	}
};

static struct attribute *adis16220_attributes[] = {
	&iio_dev_attr_capture.dev_attr.attr,
	&iio_dev_attr_capture_count.dev_attr.attr,
	NULL
};

static const struct attribute_group adis16220_attribute_group = {
	.attrs = adis16220_attributes,
};

static const struct iio_info adis16220_info = {
	.attrs = &adis16220_attribute_group,
	.driver_module = THIS_MODULE,
	.read_raw = &adis16220_read_raw,
};

static const char * const adis16220_status_error_msgs[] = {
	[ADIS16220_DIAG_STAT_VIOLATION_BIT] = "Capture period violation/interruption",
	[ADIS16220_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
	[ADIS16220_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
	[ADIS16220_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
	[ADIS16220_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};

static const struct adis_data adis16220_data = {
	.read_delay = 35,
	.write_delay = 35,
	.msc_ctrl_reg = ADIS16220_MSC_CTRL,
	.glob_cmd_reg = ADIS16220_GLOB_CMD,
	.diag_stat_reg = ADIS16220_DIAG_STAT,

	.self_test_mask = ADIS16220_MSC_CTRL_SELF_TEST_EN,
	.startup_delay = ADIS16220_STARTUP_DELAY,

	.status_error_msgs = adis16220_status_error_msgs,
	.status_error_mask = BIT(ADIS16220_DIAG_STAT_VIOLATION_BIT) |
		BIT(ADIS16220_DIAG_STAT_SPI_FAIL_BIT) |
		BIT(ADIS16220_DIAG_STAT_FLASH_UPT_BIT) |
		BIT(ADIS16220_DIAG_STAT_POWER_HIGH_BIT) |
		BIT(ADIS16220_DIAG_STAT_POWER_LOW_BIT),
};

static int adis16220_probe(struct spi_device *spi)
{
	int ret;
	struct adis16220_state *st;
	struct iio_dev *indio_dev;

	/* setup the industrialio driver allocated elements */
	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
	if (!indio_dev)
		return -ENOMEM;

	st = iio_priv(indio_dev);
	/* this is only used for removal purposes */
	spi_set_drvdata(spi, indio_dev);

	indio_dev->name = spi->dev.driver->name;
	indio_dev->dev.parent = &spi->dev;
	indio_dev->info = &adis16220_info;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->channels = adis16220_channels;
	indio_dev->num_channels = ARRAY_SIZE(adis16220_channels);

	ret = devm_iio_device_register(&spi->dev, indio_dev);
	if (ret)
		return ret;

	ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &accel_bin);
	if (ret)
		return ret;

	ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &adc1_bin);
	if (ret)
		goto error_rm_accel_bin;

	ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &adc2_bin);
	if (ret)
		goto error_rm_adc1_bin;

	ret = adis_init(&st->adis, indio_dev, spi, &adis16220_data);
	if (ret)
		goto error_rm_adc2_bin;
	/* Get the device into a sane initial state */
	ret = adis_initial_startup(&st->adis);
	if (ret)
		goto error_rm_adc2_bin;
	return 0;

error_rm_adc2_bin:
	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc2_bin);
error_rm_adc1_bin:
	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
error_rm_accel_bin:
	sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);
	return ret;
}

static int adis16220_remove(struct spi_device *spi)
{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);

	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc2_bin);
	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
	sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);

	return 0;
}

static struct spi_driver adis16220_driver = {
	.driver = {
		.name = "adis16220",
		.owner = THIS_MODULE,
	},
	.probe = adis16220_probe,
	.remove = adis16220_remove,
};
module_spi_driver(adis16220_driver);

MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16220 Digital Vibration Sensor");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16220");