blob: 2d2a51901b88d0e7eef16d3a07a194cebb67d98f [file] [log] [blame]
/*
* IO header file
*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_M68K_IO_H__
#define __ASM_M68K_IO_H__
#include <asm/byteorder.h>
#ifndef _IO_BASE
#define _IO_BASE 0
#endif
#define __raw_readb(addr) (*(volatile u8 *)(addr))
#define __raw_readw(addr) (*(volatile u16 *)(addr))
#define __raw_readl(addr) (*(volatile u32 *)(addr))
#define __raw_writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
#define __raw_writew(w,addr) ((*(volatile u16 *) (addr)) = (w))
#define __raw_writel(l,addr) ((*(volatile u32 *) (addr)) = (l))
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
#if !defined(__BIG_ENDIAN)
#define readw(addr) (*(volatile u16 *) (addr))
#define readl(addr) (*(volatile u32 *) (addr))
#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
#else
#define readw(addr) in_be16((volatile u16 *)(addr))
#define readl(addr) in_be32((volatile u32 *)(addr))
#define writew(b,addr) out_be16((volatile u16 *)(addr),(b))
#define writel(b,addr) out_be32((volatile u32 *)(addr),(b))
#endif
/*
* The insw/outsw/insl/outsl macros don't do byte-swapping.
* They are only used in practice for transferring buffers which
* are arrays of bytes, and byte-swapping is not appropriate in
* that case. - paulus
*/
#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns))
#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns))
#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define inb(port) in_8((u8 *)((port)+_IO_BASE))
#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
#if !defined(__BIG_ENDIAN)
#define inw(port) in_be16((u16 *)((port)+_IO_BASE))
#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val))
#define inl(port) in_be32((u32 *)((port)+_IO_BASE))
#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val))
#else
#define inw(port) in_le16((u16 *)((port)+_IO_BASE))
#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
#define inl(port) in_le32((u32 *)((port)+_IO_BASE))
#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
#endif
#define mb() __asm__ __volatile__ ("" : : : "memory")
extern inline void _insb(volatile u8 * port, void *buf, int ns)
{
u8 *data = (u8 *) buf;
while (ns--)
*data++ = *port;
}
extern inline void _outsb(volatile u8 * port, const void *buf, int ns)
{
u8 *data = (u8 *) buf;
while (ns--)
*port = *data++;
}
extern inline void _insw(volatile u16 * port, void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--)
*data++ = __sw16(*port);
}
extern inline void _outsw(volatile u16 * port, const void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--) {
*port = __sw16(*data);
data++;
}
}
extern inline void _insl(volatile u32 * port, void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--)
*data++ = __sw32(*port);
}
extern inline void _outsl(volatile u32 * port, const void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--) {
*port = __sw32(*data);
data++;
}
}
extern inline void _insw_ns(volatile u16 * port, void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--)
*data++ = *port;
}
extern inline void _outsw_ns(volatile u16 * port, const void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--) {
*port = *data++;
}
}
extern inline void _insl_ns(volatile u32 * port, void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--)
*data++ = *port;
}
extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--) {
*port = *data;
data++;
}
}
/*
* The *_ns versions below don't do byte-swapping.
* Neither do the standard versions now, these are just here
* for older code.
*/
#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define IO_SPACE_LIMIT ~0
/*
* 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
*/
extern inline int in_8(volatile u8 * addr)
{
return (int)*addr;
}
extern inline void out_8(volatile u8 * addr, int val)
{
*addr = (u8) val;
}
extern inline int in_le16(volatile u16 * addr)
{
return __sw16(*addr);
}
extern inline int in_be16(volatile u16 * addr)
{
return (*addr & 0xFFFF);
}
extern inline void out_le16(volatile u16 * addr, int val)
{
*addr = __sw16(val);
}
extern inline void out_be16(volatile u16 * addr, int val)
{
*addr = (u16) val;
}
extern inline unsigned in_le32(volatile u32 * addr)
{
return __sw32(*addr);
}
extern inline unsigned in_be32(volatile u32 * addr)
{
return (*addr);
}
extern inline void out_le32(volatile unsigned *addr, int val)
{
*addr = __sw32(val);
}
extern inline void out_be32(volatile unsigned *addr, int val)
{
*addr = val;
}
/* Clear and set bits in one shot. These macros can be used to clear and
* set multiple bits in a register using a single call. These macros can
* also be used to set a multiple-bit bit pattern using a mask, by
* specifying the mask in the 'clear' parameter and the new bit pattern
* in the 'set' parameter.
*/
#define clrbits(type, addr, clear) \
out_##type((addr), in_##type(addr) & ~(clear))
#define setbits(type, addr, set) \
out_##type((addr), in_##type(addr) | (set))
#define clrsetbits(type, addr, clear, set) \
out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
#define setbits_be32(addr, set) setbits(be32, addr, set)
#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
#define setbits_le32(addr, set) setbits(le32, addr, set)
#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
#define setbits_be16(addr, set) setbits(be16, addr, set)
#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
#define setbits_le16(addr, set) setbits(le16, addr, set)
#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
#define clrbits_8(addr, clear) clrbits(8, addr, clear)
#define setbits_8(addr, set) setbits(8, addr, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
static inline void sync(void)
{
/* This sync function is for PowerPC or other architecture instruction
* ColdFire does not have this instruction. Dummy function, added for
* compatibility (CFI driver)
*/
}
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
* properties specified by "flags".
*/
#define MAP_NOCACHE (0)
#define MAP_WRCOMBINE (0)
#define MAP_WRBACK (0)
#define MAP_WRTHROUGH (0)
static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
unsigned long flags)
{
return (void *)paddr;
}
/*
* Take down a mapping set up by map_physmem().
*/
static inline void unmap_physmem(void *vaddr, unsigned long flags)
{
}
static inline phys_addr_t virt_to_phys(void * vaddr)
{
return (phys_addr_t)(vaddr);
}
#endif /* __ASM_M68K_IO_H__ */