/*
 * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
 * Jason Liu <r64343@freescale.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 * Refer doc/README.imximage for more details about how-to configure
 * and create imximage boot image
 *
 * The syntax is taken as close as possible with the kwbimage
 */
/* image version */

#define __ASSEMBLY__
#include <config.h>

IMAGE_VERSION 2

/*
 * Boot Device : one of spi, sd, eimnor, nand, sata:
 * spinor: flash_offset: 0x0400
 * nand:   flash_offset: 0x0400
 * sata:   flash_offset: 0x0400
 * sd/mmc: flash_offset: 0x0400
 * eimnor: flash_offset: 0x1000
 */

#if defined(CONFIG_SYS_BOOT_EIMNOR)
BOOT_FROM	nor
#else /* others has the same flash_offset as sd */
BOOT_FROM	sd
#endif

#ifdef CONFIG_USE_PLUGIN
/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
PLUGIN	board/freescale/mx6qsabreauto/plugin.bin 0x00907000
#else

#ifdef CONFIG_SECURE_BOOT
CSF CONFIG_CSF_SIZE
#endif

/*
 * Device Configuration Data (DCD)
 *
 * Each entry must have the format:
 * Addr-type           Address        Value
 *
 * where:
 *	Addr-type register length (1,2 or 4 bytes)
 *	Address	  absolute address of the register
 *	value	  value to be stored in the register
 */
DATA 4 0x020e0774 0x000C0000
DATA 4 0x020e0754 0x00000000
DATA 4 0x020e04ac 0x00000030
DATA 4 0x020e04b0 0x00000030
DATA 4 0x020e0464 0x00000030
DATA 4 0x020e0490 0x00000030
DATA 4 0x020e074c 0x00000030
DATA 4 0x020e0494 0x00000030
DATA 4 0x020e04a0 0x00000000
DATA 4 0x020e04b4 0x00000030
DATA 4 0x020e04b8 0x00000030
DATA 4 0x020e076c 0x00000030
DATA 4 0x020e0750 0x00020000
DATA 4 0x020e04bc 0x00000028
DATA 4 0x020e04c0 0x00000028
DATA 4 0x020e04c4 0x00000028
DATA 4 0x020e04c8 0x00000028
DATA 4 0x020e04cc 0x00000028
DATA 4 0x020e04d0 0x00000028
DATA 4 0x020e04d4 0x00000028
DATA 4 0x020e04d8 0x00000028
DATA 4 0x020e0760 0x00020000
DATA 4 0x020e0764 0x00000028
DATA 4 0x020e0770 0x00000028
DATA 4 0x020e0778 0x00000028
DATA 4 0x020e077c 0x00000028
DATA 4 0x020e0780 0x00000028
DATA 4 0x020e0784 0x00000028
DATA 4 0x020e078c 0x00000028
DATA 4 0x020e0748 0x00000028
DATA 4 0x020e0470 0x00000028
DATA 4 0x020e0474 0x00000028
DATA 4 0x020e0478 0x00000028
DATA 4 0x020e047c 0x00000028
DATA 4 0x020e0480 0x00000028
DATA 4 0x020e0484 0x00000028
DATA 4 0x020e0488 0x00000028
DATA 4 0x020e048c 0x00000028
DATA 4 0x021b0800 0xa1390003
DATA 4 0x021b080c 0x001F001F
DATA 4 0x021b0810 0x001F001F
DATA 4 0x021b480c 0x001F001F
DATA 4 0x021b4810 0x001F001F
DATA 4 0x021b083c 0x42190217
DATA 4 0x021b0840 0x017B017B
DATA 4 0x021b483c 0x4176017B
DATA 4 0x021b4840 0x015F016C
DATA 4 0x021b0848 0x4C4C4D4C
DATA 4 0x021b4848 0x4A4D4C48
DATA 4 0x021b0850 0x3F3F3F40
DATA 4 0x021b4850 0x3538382E
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
DATA 4 0x021b481c 0x33333333
DATA 4 0x021b4820 0x33333333
DATA 4 0x021b4824 0x33333333
DATA 4 0x021b4828 0x33333333
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b0004 0x00020025
DATA 4 0x021b0008 0x00333030
DATA 4 0x021b000c 0x676B5313
DATA 4 0x021b0010 0xB66E8B63
DATA 4 0x021b0014 0x01FF00DB
DATA 4 0x021b0018 0x00001740
DATA 4 0x021b001c 0x00008000
DATA 4 0x021b002c 0x000026d2
DATA 4 0x021b0030 0x006B1023
DATA 4 0x021b0040 0x00000047
DATA 4 0x021b0000 0x841A0000
DATA 4 0x021b001c 0x04008032
DATA 4 0x021b001c 0x00008033
DATA 4 0x021b001c 0x00048031
DATA 4 0x021b001c 0x05208030
DATA 4 0x021b001c 0x04008040
DATA 4 0x021b0020 0x00005800
DATA 4 0x021b0818 0x00011117
DATA 4 0x021b4818 0x00011117
DATA 4 0x021b0004 0x00025565
DATA 4 0x021b0404 0x00011006
DATA 4 0x021b001c 0x00000000

/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0xFFFFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x00000FFF

/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
#endif