diff --git a/i2c-tools.patches/i2c-tools-50.patch b/i2c-tools.patches/i2c-tools-50.patch
new file mode 100644
index 0000000..4bb2d32
--- /dev/null
+++ b/i2c-tools.patches/i2c-tools-50.patch
@@ -0,0 +1,300 @@
+diff -aruN i2c-tools-3.1.2/tools/i2cgetwide.8 i2c-tools-3.1.2.N/tools/i2cgetwide.8
+--- i2c-tools-3.1.2/tools/i2cgetwide.8	1969-12-31 16:00:00.000000000 -0800
++++ i2c-tools-3.1.2.N/tools/i2cgetwide.8	2016-03-21 14:39:29.584650609 -0700
+@@ -0,0 +1,68 @@
++.TH I2CGETWIDE 8 "March 2016"
++.SH "NAME"
++i2cgetwide \- read from I2C chip registers of arbitrary data/address length
++
++.SH SYNOPSIS
++.B i2cgetwide
++.RB [ -f ]
++.RB [ -y ]
++.I i2cbus
++.I chip-address
++.I data-address-length
++.I data-address
++.I data-length
++.br
++.B i2cgetwide
++.B -V
++
++.SH DESCRIPTION
++i2cgetwide is a small helper program to read registers visible through the I2C
++bus. This should be used for registers whose addresses are greater than 1 byte
++and register value is greater than 1 byte.
++
++.SH OPTIONS
++.TP
++.B -V
++Display the version and exit.
++.TP
++.B -f
++Force access to the device even if it is already busy. By default, i2cgetwide
++will refuse to access a device which is already under the control of a
++kernel driver. Using this flag is dangerous, it can seriously confuse the
++kernel driver in question. It can also cause i2cgetwide to return an invalid
++value. So use at your own risk and only if you know what you're doing.
++.TP
++.B -y
++Disable interactive mode. By default, i2cgetwide will wait for a confirmation
++from the user before messing with the I2C bus. When this flag is used, it
++will perform the operation directly. This is mainly meant to be used in
++scripts. Use with caution.
++.PP
++There are five required options to i2cgetwide. \fIi2cbus\fR indicates the number
++or name of the I2C bus to be scanned.  This number should correspond to one of
++the busses listed by \fIi2cdetect -l\fR. \fIchip-address\fR specifies the
++address of the chip on that bus, and is an integer between 0x03 and 0x77.
++.PP
++\fIdata-address-length\fR specifies the length of the address of the register
++on that chip.
++.PP
++\fIdata-length\fR specifies the length of the value of the register
++on that chip.
++.PP
++\fIdata-address\fR specifies the address on that chip to read from, and it is a
++list of length \fIdata-address-length\fR.
++
++.SH WARNING
++i2cgetwide can be extremely dangerous if used improperly. I2C and SMBus are designed
++in such a way that an SMBus read transaction can be seen as a write transaction by
++certain chips. This is particularly true if setting \fImode\fR to \fBcp\fP (write byte/read
++byte with PEC). Be extremely careful using this program.
++
++.SH SEE ALSO
++i2cdump(8), i2cset(8) i2cget(8)
++
++.SH AUTHOR
++Renga Aravamudhan
++
++This manual page was strongly inspired from those written by Jean Delvare
++for i2cget.
+diff -aruN i2c-tools-3.1.2/tools/i2cgetwide.c i2c-tools-3.1.2.N/tools/i2cgetwide.c
+--- i2c-tools-3.1.2/tools/i2cgetwide.c	1969-12-31 16:00:00.000000000 -0800
++++ i2c-tools-3.1.2.N/tools/i2cgetwide.c	2016-03-22 16:35:55.809045663 -0700
+@@ -0,0 +1,192 @@
++/*
++    i2cgetwide.c - A user-space program to read a wide I2C register.
++
++    Based on i2cget.c:
++    Copyright (C) 2001-2003  Frodo Looijaard <frodol@dds.nl>, and
++                             Mark D. Studebaker <mdsxyz123@yahoo.com>
++    Copyright (C) 2004-2005  Jean Delvare
++    Copyright (C) 2005-2012  Jean Delvare <jdelvare@suse.de>
++
++    This program is free software; you can redistribute it and/or modify
++    it under the terms of the GNU General Public License as published by
++    the Free Software Foundation; either version 2 of the License, or
++    (at your option) any later version.
++
++    This program is distributed in the hope that it will be useful,
++    but WITHOUT ANY WARRANTY; without even the implied warranty of
++    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++    GNU General Public License for more details.
++
++    You should have received a copy of the GNU General Public License
++    along with this program; if not, write to the Free Software
++    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++    MA 02110-1301 USA.
++*/
++
++#include <sys/ioctl.h>
++#include <errno.h>
++#include <stdint.h>
++#include <string.h>
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <linux/i2c-dev.h>
++#include "i2cbusses.h"
++#include "util.h"
++#include "../version.h"
++
++static void help(void) __attribute__ ((noreturn));
++
++static void help(void)
++{
++	fprintf(stderr,
++		"Usage: i2cgetwide [-f] [-y] [-V] I2CBUS CHIP-ADDRESS DATA-ADDRESS-LENGTH DATA-LENGTH DATA_ADDRESS\n"
++		"  I2CBUS is an integer or an I2C bus name\n"
++		"  CHIP-ADDRESS is an integer (0x03 - 0x77)\n"
++		"  DATA-ADDRESS-LENGTH is the length of register address in bytes\n"
++		"  DATA-LENGTH is the length of the register content in bytes\n"
++		"  DATA-ADDRESS is the register address is specified as a list of DATA-ADDRESS-LENGTH bytes\n");
++	exit(1);
++}
++
++static int confirm(const char *filename, int address)
++{
++	int dont = 0;
++
++	fprintf(stderr, "WARNING! This program can confuse your I2C "
++		"bus, cause data loss and worse!\n");
++
++	fprintf(stderr, "I will read from device file %s, chip "
++		"address 0x%02x, ", filename, address);
++
++	fprintf(stderr, "Continue? [Y/n] ");
++	fflush(stderr);
++	if (!user_ack(!dont)) {
++		fprintf(stderr, "Aborting on user request.\n");
++		return 0;
++	}
++
++	return 1;
++}
++
++static __s32 i2c_rdwr_read(int file, __u16 address,
++				void *reg, size_t reg_size,
++				void *buf, size_t count)
++{
++	struct i2c_rdwr_ioctl_data args;
++	struct i2c_msg xfer[2];
++
++	xfer[0].addr = address;
++	xfer[0].flags = 0;
++	xfer[0].buf = reg;
++	xfer[0].len = reg_size;
++
++	xfer[1].addr = address;
++	xfer[1].flags = I2C_M_RD;
++	xfer[1].buf = buf;
++	xfer[1].len = count;
++
++	args.msgs = xfer;
++	args.nmsgs = 2;
++
++	return ioctl(file,I2C_RDWR,&args);
++}
++
++int main(int argc, char *argv[])
++{
++	int res, i2cbus, address, file;
++	int daddress_length, data_length, i;
++	char *end;
++	unsigned char daddress[I2C_SMBUS_I2C_BLOCK_MAX], data[I2C_SMBUS_I2C_BLOCK_MAX];
++	char filename[20];
++	int flags = 0;
++	int force = 0, yes = 0, version = 0;
++
++	/* handle (optional) flags first */
++	while (1+flags < argc && argv[1+flags][0] == '-') {
++		switch (argv[1+flags][1]) {
++		case 'V': version = 1; break;
++		case 'f': force = 1; break;
++		case 'y': yes = 1; break;
++		default:
++			fprintf(stderr, "Error: Unsupported option "
++				"\"%s\"!\n", argv[1+flags]);
++			help();
++			exit(1);
++		}
++		flags++;
++	}
++
++	if (version) {
++		fprintf(stderr, "i2cgetwide version %s\n", VERSION);
++		exit(0);
++	}
++
++	if (argc < flags + 5)
++		help();
++
++	i2cbus = lookup_i2c_bus(argv[flags+1]);
++	if (i2cbus < 0)
++		help();
++
++	address = parse_i2c_address(argv[flags+2]);
++	if (address < 0)
++		help();
++
++	daddress_length = strtol(argv[flags+3], &end, 0);
++	if (*end) {
++		fprintf(stderr, "Error in register address length\n");
++		help();
++	}
++	if ( (daddress_length <= 0) || (daddress_length > 4) ) {
++		fprintf(stderr, "Register address length cannot be <=0 or >4 \n");
++		help();
++	}
++
++	data_length = strtol(argv[flags+4], &end, 0);
++	if (*end) {
++		fprintf(stderr, "Error in data length\n");
++		help();
++	}
++	if ( (data_length <= 0) || (data_length > 4) ) {
++		fprintf(stderr, "Register data length cannot be <=0 or >4 \n");
++		help();
++	}
++
++	if (argc < flags + 5 + daddress_length) {
++		fprintf(stderr, "Error in register address \n");
++		help();
++	}
++
++	for(i = 0; i < daddress_length; i++) {
++		daddress[i] = strtol(argv[flags+5+i], &end, 0);
++		if (*end) {
++			fprintf(stderr, "Error in register address\n");
++			help();
++		}
++	}
++
++	file = open_i2c_dev(i2cbus, filename, sizeof(filename), 0);
++	if (file < 0
++	 || set_slave_addr(file, address, force))
++		exit(1);
++
++	if (!yes && !confirm(filename, address))
++		exit(0);
++
++	res = i2c_rdwr_read(file, address, daddress, daddress_length,
++					data, data_length);
++	close(file);
++
++	if (res < 0) {
++		fprintf(stderr, "Error: Read failed\n");
++		exit(2);
++	}
++
++	printf("0x");
++	for(i = 0; i < data_length; i++)
++		printf("%02x", data[i]);
++	printf("\n");
++
++	exit(0);
++}
+diff -aruN i2c-tools-3.1.2/tools/Module.mk i2c-tools-3.1.2.N/tools/Module.mk
+--- i2c-tools-3.1.2/tools/Module.mk	2014-02-20 00:37:15.711233000 -0800
++++ i2c-tools-3.1.2.N/tools/Module.mk	2016-03-21 14:39:29.584650609 -0700
+@@ -13,7 +13,7 @@
+ 		   -Wcast-align -Wwrite-strings -Wnested-externs -Winline \
+ 		   -W -Wundef -Wmissing-prototypes -Iinclude
+ 
+-TOOLS_TARGETS	:= i2cdetect i2cdump i2cset i2cget
++TOOLS_TARGETS	:= i2cdetect i2cdump i2cset i2cget i2cgetwide
+ 
+ #
+ # Programs
+@@ -31,6 +31,9 @@
+ $(TOOLS_DIR)/i2cget: $(TOOLS_DIR)/i2cget.o $(TOOLS_DIR)/i2cbusses.o $(TOOLS_DIR)/util.o
+ 	$(CC) $(LDFLAGS) -o $@ $^
+ 
++$(TOOLS_DIR)/i2cgetwide: $(TOOLS_DIR)/i2cgetwide.o $(TOOLS_DIR)/i2cbusses.o $(TOOLS_DIR)/util.o
++	$(CC) $(LDFLAGS) -o $@ $^
++
+ #
+ # Objects
+ #
+@@ -47,6 +50,9 @@
+ $(TOOLS_DIR)/i2cget.o: $(TOOLS_DIR)/i2cget.c $(TOOLS_DIR)/i2cbusses.h $(TOOLS_DIR)/util.h version.h $(INCLUDE_DIR)/linux/i2c-dev.h
+ 	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
+ 
++$(TOOLS_DIR)/i2cgetwide.o: $(TOOLS_DIR)/i2cgetwide.c $(TOOLS_DIR)/i2cbusses.h $(TOOLS_DIR)/util.h version.h $(INCLUDE_DIR)/linux/i2c-dev.h
++	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
++
+ $(TOOLS_DIR)/i2cbusses.o: $(TOOLS_DIR)/i2cbusses.c $(TOOLS_DIR)/i2cbusses.h $(INCLUDE_DIR)/linux/i2c-dev.h
+ 	$(CC) $(CFLAGS) $(TOOLS_CFLAGS) -c $< -o $@
+ 
diff --git a/i2c-tools.tar.bz2 b/i2c-tools.tar.bz2
new file mode 100644
index 0000000..170be74
--- /dev/null
+++ b/i2c-tools.tar.bz2
Binary files differ
diff --git a/i2c-tools.url b/i2c-tools.url
new file mode 100644
index 0000000..cd10354
--- /dev/null
+++ b/i2c-tools.url
@@ -0,0 +1 @@
+http://fossies.org/linux/misc/i2c-tools-3.1.2.tar.bz2
diff --git a/i2c-tools.version b/i2c-tools.version
new file mode 100644
index 0000000..ef538c2
--- /dev/null
+++ b/i2c-tools.version
@@ -0,0 +1 @@
+3.1.2