diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..c0cb053
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,163 @@
+#
+#    Copyright (c) 2010-2011 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the makefile for the Avahi ZeroConf (aka Bonjour)
+#      multicast DNS (mDNS) Service Discovery (SD) software.
+#
+
+
+include pre.mak
+
+PackageName		:= avahi
+
+PackageExtension	:= tar.gz
+PackageSeparator	:= -
+
+PackagePatchArgs	:= -p1
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+SOURCEDIRS                      = $(PackageSourceDir)
+$(PackageSourceDir)_RULE_TARGET = $(BuildDirectory)/configure
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/LICENSE: $(BuildDirectory)/source
+
+$(PackageLicenseFile): $(PackageSourceDir)/LICENSE
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+$(BuildDirectory)/source: | $(PackageSourceDir)
+	$(Verbose)touch $@
+
+# Patch the sources, if necessary.
+
+$(BuildDirectory)/patch: $(BuildDirectory)/source
+	$(Verbose)touch $@
+
+# Generate the package build makefile.
+
+# Configure the source for building.
+#
+# Avahi uses and, in fact, requires pkg-config to set-up LDFLAGS and
+# CFLAGS for LIBDAEMON even though these are explicitly provided on
+# the configure command line above as prescribed in the "how to
+# configure WITHOUT pkg-config" instructions.
+#
+# Unfortunately, some site Linux systems are quite old and have a
+# version of pkg-config that avahi refuses to work with.
+# Consequently, we place $(HostBinDir) first in the path to ensure
+# that the project-local version of pkg-config is detected and used
+# rather than a host- or site-local version.
+
+$(BuildDirectory)/configure: PATH := $(HostBinDir):$(PATH)
+
+$(BuildDirectory)/configure: $(BuildDirectory)/source | $(PackageSourceDir) $(BuildDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC) $(CPPOPTFLAGS)" CXX="$(CXX) $(CPPOPTFLAGS)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	CPPFLAGS="$(call ToolGenerateIncludeArgument,$(ExpatIncludePath)) $(call ToolGenerateIncludeArgument,$(LibCapIncludePath)) \
+	          $(call ToolGenerateIncludeArgument,$(LinuxIncludePath))" \
+	LDFLAGS="$(call GenerateLibraryPathArgument,$(ExpatLibraryPath)) $(call GenerateLibraryPathArgument,$(LibCapLibraryPath))" \
+	DBUS_CFLAGS="$(call ToolGenerateIncludeArgument,$(DbusIncludePaths))" \
+	DBUS_LIBS="$(call GenerateLibraryArgument,$(DbusLibraryPath))" \
+	DBUS_VERSION=$(shell cat $(DbusSourcesPath)/dbus.version) \
+	LIBDAEMON_CFLAGS="$(call ToolGenerateIncludeArgument,$(DaemonIncludePath))" \
+	LIBDAEMON_LIBS="$(call GenerateLibraryArgument,$(DaemonLibraryPath))" \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--disable-autoipd \
+	--disable-gdbm \
+	--disable-glib \
+	--disable-gobject \
+	--disable-gtk \
+	--disable-gtk3 \
+	--disable-manpages \
+	--disable-mono \
+	--disable-monodoc \
+	--disable-python \
+	--disable-qt3 \
+	--disable-qt4 \
+	--enable-dbus \
+	--enable-libdaemon \
+	--with-distro=none \
+	--with-xml=expat \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var \
+	--disable-static
+	$(Verbose)touch $@
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+$(BuildDirectory)/build: $(BuildDirectory)/configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+	$(Verbose)touch $@
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libavahi-core.la' and 'libavahi-common.la'
+# because some packages that depend on these libraries use libtool. If
+# libtool finds a '*.la' file for a library, it uses the value of
+# 'libdir=<dir>' it finds. In our case, since '--prefix=/usr' this
+# value is '/usr/lib'. It then resolves '-lavahi-core' or
+# '-lavahi-common' to '/usr/lib/libavahi-core.so' and
+# '/usr/lib/libavahi-common.so', respectively. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+$(BuildDirectory)/stage: $(BuildDirectory)/build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libavahi-common.la usr/lib/libavahi-core.la usr/lib/libavahi-client.la)
+	$(Verbose)touch $@
+
+.PHONY: stage
+stage: $(BuildDirectory)/stage
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
+
+
+
diff --git a/avahi.patches/avahi-50.description b/avahi.patches/avahi-50.description
new file mode 100644
index 0000000..dddcede
--- /dev/null
+++ b/avahi.patches/avahi-50.description
@@ -0,0 +1,2 @@
+This patch handles the absence of SOCK_CLOEXEC for sytems in which it is 
+not defined.
diff --git a/avahi.patches/avahi-50.patch b/avahi.patches/avahi-50.patch
new file mode 100644
index 0000000..b772a20
--- /dev/null
+++ b/avahi.patches/avahi-50.patch
@@ -0,0 +1,24 @@
+diff -aruN a/avahi-daemon/sd-daemon.c b/avahi-daemon/sd-daemon.c
+--- a/avahi-daemon/sd-daemon.c	2010-07-12 17:45:20.000000000 -0700
++++ b/avahi-daemon/sd-daemon.c	2010-09-08 09:52:29.000000000 -0700
+@@ -328,6 +328,11 @@
+ #if defined(DISABLE_SYSTEMD) || !defined(__linux__)
+         return 0;
+ #else
++# if defined(SOCK_CLOEXEC)
++		int sock_cloexec = SOCK_CLOEXEC;
++# else
++#  define sock_cloexec 0
++# endif
+         int fd = -1, r;
+         struct msghdr msghdr;
+         struct iovec iovec;
+@@ -353,7 +358,7 @@
+                 goto finish;
+         }
+ 
+-        if ((fd = socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0)) < 0) {
++        if ((fd = socket(AF_UNIX, SOCK_DGRAM|sock_cloexec, 0)) < 0) {
+                 r = -errno;
+                 goto finish;
+         }
diff --git a/avahi.patches/avahi-51.description b/avahi.patches/avahi-51.description
new file mode 100644
index 0000000..adbe41d
--- /dev/null
+++ b/avahi.patches/avahi-51.description
@@ -0,0 +1 @@
+This patch allows the package builder to override the D-Bus version from the command line.
diff --git a/avahi.patches/avahi-51.patch b/avahi.patches/avahi-51.patch
new file mode 100644
index 0000000..6c93697
--- /dev/null
+++ b/avahi.patches/avahi-51.patch
@@ -0,0 +1,22 @@
+diff -aruN a/configure b/configure
+--- a/configure	2010-10-04 17:05:05.643932697 -0700
++++ b/configure	2010-10-11 13:35:22.000000000 -0700
+@@ -20221,7 +20221,6 @@
+ fi
+ 
+ 
+-DBUS_VERSION="Disabled"
+ DBUS_SYS_DIR="Disabled"
+ DBUS_SYSTEM_BUS_DEFAULT_ADDRESS="Disabled"
+ if test "x$HAVE_DBUS" = "xyes" ; then
+@@ -20321,7 +20320,9 @@
+ $as_echo "#define HAVE_DBUS 1" >>confdefs.h
+ 
+ 
+-    DBUS_VERSION=`$PKG_CONFIG dbus-1 --modversion`
++    if test "z$DBUS_VERSION" = "z"; then
++        DBUS_VERSION=`$PKG_CONFIG dbus-1 --modversion`
++    fi
+     DBUS_VERSION_MAJOR=`echo $DBUS_VERSION | awk -F. '{print $1}'`
+     DBUS_VERSION_MINOR=`echo $DBUS_VERSION | awk -F. '{print $2}'`
+     DBUS_VERSION_MICRO=`echo $DBUS_VERSION | awk -F. '{print $3}'`
diff --git a/avahi.tar.gz b/avahi.tar.gz
new file mode 100644
index 0000000..07b6f66
--- /dev/null
+++ b/avahi.tar.gz
Binary files differ
diff --git a/avahi.url b/avahi.url
new file mode 100644
index 0000000..5af5eb1
--- /dev/null
+++ b/avahi.url
@@ -0,0 +1 @@
+http://avahi.org/download/avahi-0.6.31.tar.gz
diff --git a/avahi.version b/avahi.version
new file mode 100644
index 0000000..5c35298
--- /dev/null
+++ b/avahi.version
@@ -0,0 +1 @@
+0.6.31