diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..01dc51a
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,164 @@
+#
+#    Copyright (c) 2010-2011 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the make file for libxml2, a C-based library for
+#      parsing Extensible Markup Language (XML) documents.
+#
+
+
+include pre.mak
+
+PackageName		:= libxml2
+
+PackageExtension	:= tar.gz
+PackageSeparator	:= -
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+ifeq ($(BUILD_FEATURE_LTTNG_TOOLS), 1)
+	WRITER_SUPPORT = --with-writer=yes
+	SCHEMAS_SUPPORT = --with-schemas=yes
+else
+	WRITER_SUPPORT = --with-writer=no
+	SCHEMAS_SUPPORT = --with-schemas=no
+endif
+
+SOURCEDIRS                      = $(PackageSourceDir)
+$(PackageSourceDir)_RULE_TARGET = $(BuildDirectory)/configure
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: $(BuildDirectory)/source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+$(BuildDirectory)/source: | $(PackageSourceDir)
+	$(Verbose)touch $@
+
+# Patch the sources, if necessary.
+
+$(BuildDirectory)/patch: $(BuildDirectory)/source
+	$(Verbose)touch $@
+
+# Generate the package build makefile.
+
+# Configure the source for building.
+
+$(BuildDirectory)/configure: $(BuildDirectory)/source | $(PackageSourceDir) $(BuildDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC) $(CPPOPTFLAGS)" CXX="$(CXX) $(CPPOPTFLAGS)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	CPPFLAGS="$(call ToolGenerateIncludeArgument,$(LinuxIncludePath))" \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--with-zlib=$(ZlibPrefixPath) \
+	--without-python \
+	--prefix=$(addprefix $(LibPrefixConfigOption),/usr) \
+	--sysconfdir=$(addprefix $(LibPrefixConfigOption),/etc) \
+	--localstatedir=$(addprefix $(LibPrefixConfigOption),/var) \
+	--disable-static \
+	--with-gnu-ld=no \
+	--with-c14n=no \
+	--with-catalog=no \
+	--with-debug=no \
+	--with-docbook=no \
+	--with-fexceptions=no \
+	--with-ftp=no \
+	--with-history=no \
+	--with-html=no \
+	--with-http=no \
+	--with-iconv=no \
+	--with-iso8859x=no \
+	--with-legacy=no \
+	--with-mem-debug=no \
+	--with-minimum=no \
+	--with-output=yes \
+	--with-pattern=no \
+	--with-push=no \
+	--with-reader=no \
+	--with-readline=no \
+	--with-regexps=no \
+	--with-run-debug=no \
+	--with-sax1=yes \
+	$(SCHEMAS_SUPPORT) \
+	--with-schematron=no \
+	--with-threads=no \
+	--with-thread-alloc=no \
+	--with-tree=yes \
+	--with-valid=no \
+	$(WRITER_SUPPORT) \
+	--with-xinclude=no \
+	--with-xpath=no \
+	--with-xptr=no \
+	--with-modules=no
+	$(Verbose)touch $@
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+$(BuildDirectory)/build: $(BuildDirectory)/configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+	$(Verbose)touch $@
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libxml2.la' because some packages that depend
+# on libxml2 use libtool. If libtool finds a '*.la' file for a
+# library, it uses the value of 'libdir=<dir>' it finds. In our case,
+# since '--prefix=/usr' this value is '/usr/lib'. It then resolves
+# '-llibxml2' to '/usr/lib/libxml2.so'. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+$(BuildDirectory)/stage: $(BuildDirectory)/build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) $(call GenerateLibraryDestinationArgument,$(ResultDirectory)) install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libxml2.la)
+	$(Verbose)touch $@
+
+.PHONY: stage
+stage: $(BuildDirectory)/stage
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/libxml2.tar.gz b/libxml2.tar.gz
new file mode 100644
index 0000000..c530a49
--- /dev/null
+++ b/libxml2.tar.gz
Binary files differ
diff --git a/libxml2.url b/libxml2.url
new file mode 100644
index 0000000..22f3eaf
--- /dev/null
+++ b/libxml2.url
@@ -0,0 +1 @@
+ftp://xmlsoft.org/libxml2/libxml2-2.7.7.tar.gz
diff --git a/libxml2.version b/libxml2.version
new file mode 100644
index 0000000..1f7da99
--- /dev/null
+++ b/libxml2.version
@@ -0,0 +1 @@
+2.7.7