Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver

The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
See ../mfd/atmel-hlcdc.txt for more details.

Required properties:
 - compatible: value should be "atmel,hlcdc-display-controller"
 - pinctrl-names: the pin control state names. Should contain "default".
 - pinctrl-0: should contain the default pinctrl states.
 - #address-cells: should be set to 1.
 - #size-cells: should be set to 0.

Required children nodes:
 Children nodes are encoding available output ports and their connections
 to external devices using the OF graph reprensentation (see ../graph.txt).
 At least one port node is required.

Example:

	hlcdc: hlcdc@f0030000 {
		compatible = "atmel,sama5d3-hlcdc";
		reg = <0xf0030000 0x2000>;
		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
		clock-names = "periph_clk","sys_clk", "slow_clk";
		status = "disabled";

		hlcdc-display-controller {
			compatible = "atmel,hlcdc-display-controller";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0>;

				hlcdc_panel_output: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&panel_input>;
				};
			};
		};

		hlcdc_pwm: hlcdc-pwm {
			compatible = "atmel,hlcdc-pwm";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_lcd_pwm>;
			#pwm-cells = <3>;
		};
	};