| /* |
| * drxk_hard: DRX-K DVB-C/T demodulator driver |
| * |
| * Copyright (C) 2010-2011 Digital Devices GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 only, as published by the Free Software Foundation. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <linux/hardirq.h> |
| #include <asm/div64.h> |
| |
| #include "dvb_frontend.h" |
| #include "drxk.h" |
| #include "drxk_hard.h" |
| #include "dvb_math.h" |
| |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode); |
| static int power_down_qam(struct drxk_state *state); |
| static int set_dvbt_standard(struct drxk_state *state, |
| enum operation_mode o_mode); |
| static int set_qam_standard(struct drxk_state *state, |
| enum operation_mode o_mode); |
| static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz, |
| s32 tuner_freq_offset); |
| static int set_dvbt_standard(struct drxk_state *state, |
| enum operation_mode o_mode); |
| static int dvbt_start(struct drxk_state *state); |
| static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, |
| s32 tuner_freq_offset); |
| static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status); |
| static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status); |
| static int switch_antenna_to_qam(struct drxk_state *state); |
| static int switch_antenna_to_dvbt(struct drxk_state *state); |
| |
| static bool is_dvbt(struct drxk_state *state) |
| { |
| return state->m_operation_mode == OM_DVBT; |
| } |
| |
| static bool is_qam(struct drxk_state *state) |
| { |
| return state->m_operation_mode == OM_QAM_ITU_A || |
| state->m_operation_mode == OM_QAM_ITU_B || |
| state->m_operation_mode == OM_QAM_ITU_C; |
| } |
| |
| #define NOA1ROM 0 |
| |
| #define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) |
| #define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) |
| |
| #define DEFAULT_MER_83 165 |
| #define DEFAULT_MER_93 250 |
| |
| #ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH |
| #define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02) |
| #endif |
| |
| #ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH |
| #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) |
| #endif |
| |
| #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 |
| #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 |
| |
| #ifndef DRXK_KI_RAGC_ATV |
| #define DRXK_KI_RAGC_ATV 4 |
| #endif |
| #ifndef DRXK_KI_IAGC_ATV |
| #define DRXK_KI_IAGC_ATV 6 |
| #endif |
| #ifndef DRXK_KI_DAGC_ATV |
| #define DRXK_KI_DAGC_ATV 7 |
| #endif |
| |
| #ifndef DRXK_KI_RAGC_QAM |
| #define DRXK_KI_RAGC_QAM 3 |
| #endif |
| #ifndef DRXK_KI_IAGC_QAM |
| #define DRXK_KI_IAGC_QAM 4 |
| #endif |
| #ifndef DRXK_KI_DAGC_QAM |
| #define DRXK_KI_DAGC_QAM 7 |
| #endif |
| #ifndef DRXK_KI_RAGC_DVBT |
| #define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2) |
| #endif |
| #ifndef DRXK_KI_IAGC_DVBT |
| #define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2) |
| #endif |
| #ifndef DRXK_KI_DAGC_DVBT |
| #define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7) |
| #endif |
| |
| #ifndef DRXK_AGC_DAC_OFFSET |
| #define DRXK_AGC_DAC_OFFSET (0x800) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) |
| #endif |
| |
| #ifndef DRXK_QAM_SYMBOLRATE_MAX |
| #define DRXK_QAM_SYMBOLRATE_MAX (7233000) |
| #endif |
| |
| #define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56 |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64 |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0 |
| #define DRXK_BL_ROM_OFFSET_TAPS_BG 24 |
| #define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32 |
| #define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40 |
| #define DRXK_BL_ROM_OFFSET_TAPS_FM 48 |
| #define DRXK_BL_ROM_OFFSET_UCODE 0 |
| |
| #define DRXK_BLC_TIMEOUT 100 |
| |
| #define DRXK_BLCC_NR_ELEMENTS_TAPS 2 |
| #define DRXK_BLCC_NR_ELEMENTS_UCODE 6 |
| |
| #define DRXK_BLDC_NR_ELEMENTS_TAPS 28 |
| |
| #ifndef DRXK_OFDM_NE_NOTCH_WIDTH |
| #define DRXK_OFDM_NE_NOTCH_WIDTH (4) |
| #endif |
| |
| #define DRXK_QAM_SL_SIG_POWER_QAM16 (40960) |
| #define DRXK_QAM_SL_SIG_POWER_QAM32 (20480) |
| #define DRXK_QAM_SL_SIG_POWER_QAM64 (43008) |
| #define DRXK_QAM_SL_SIG_POWER_QAM128 (20992) |
| #define DRXK_QAM_SL_SIG_POWER_QAM256 (43520) |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages"); |
| |
| #define dprintk(level, fmt, arg...) do { \ |
| if (debug >= level) \ |
| printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg); \ |
| } while (0) |
| |
| |
| static inline u32 MulDiv32(u32 a, u32 b, u32 c) |
| { |
| u64 tmp64; |
| |
| tmp64 = (u64) a * (u64) b; |
| do_div(tmp64, c); |
| |
| return (u32) tmp64; |
| } |
| |
| static inline u32 Frac28a(u32 a, u32 c) |
| { |
| int i = 0; |
| u32 Q1 = 0; |
| u32 R0 = 0; |
| |
| R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */ |
| Q1 = a / c; /* |
| * integer part, only the 4 least significant |
| * bits will be visible in the result |
| */ |
| |
| /* division using radix 16, 7 nibbles in the result */ |
| for (i = 0; i < 7; i++) { |
| Q1 = (Q1 << 4) | (R0 / c); |
| R0 = (R0 % c) << 4; |
| } |
| /* rounding */ |
| if ((R0 >> 3) >= c) |
| Q1++; |
| |
| return Q1; |
| } |
| |
| static inline u32 log10times100(u32 value) |
| { |
| return (100L * intlog10(value)) >> 24; |
| } |
| |
| /****************************************************************************/ |
| /* I2C **********************************************************************/ |
| /****************************************************************************/ |
| |
| static int drxk_i2c_lock(struct drxk_state *state) |
| { |
| i2c_lock_adapter(state->i2c); |
| state->drxk_i2c_exclusive_lock = true; |
| |
| return 0; |
| } |
| |
| static void drxk_i2c_unlock(struct drxk_state *state) |
| { |
| if (!state->drxk_i2c_exclusive_lock) |
| return; |
| |
| i2c_unlock_adapter(state->i2c); |
| state->drxk_i2c_exclusive_lock = false; |
| } |
| |
| static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs, |
| unsigned len) |
| { |
| if (state->drxk_i2c_exclusive_lock) |
| return __i2c_transfer(state->i2c, msgs, len); |
| else |
| return i2c_transfer(state->i2c, msgs, len); |
| } |
| |
| static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val) |
| { |
| struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD, |
| .buf = val, .len = 1} |
| }; |
| |
| return drxk_i2c_transfer(state, msgs, 1); |
| } |
| |
| static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len) |
| { |
| int status; |
| struct i2c_msg msg = { |
| .addr = adr, .flags = 0, .buf = data, .len = len }; |
| |
| dprintk(3, ":"); |
| if (debug > 2) { |
| int i; |
| for (i = 0; i < len; i++) |
| pr_cont(" %02x", data[i]); |
| pr_cont("\n"); |
| } |
| status = drxk_i2c_transfer(state, &msg, 1); |
| if (status >= 0 && status != 1) |
| status = -EIO; |
| |
| if (status < 0) |
| pr_err("i2c write error at addr 0x%02x\n", adr); |
| |
| return status; |
| } |
| |
| static int i2c_read(struct drxk_state *state, |
| u8 adr, u8 *msg, int len, u8 *answ, int alen) |
| { |
| int status; |
| struct i2c_msg msgs[2] = { |
| {.addr = adr, .flags = 0, |
| .buf = msg, .len = len}, |
| {.addr = adr, .flags = I2C_M_RD, |
| .buf = answ, .len = alen} |
| }; |
| |
| status = drxk_i2c_transfer(state, msgs, 2); |
| if (status != 2) { |
| if (debug > 2) |
| pr_cont(": ERROR!\n"); |
| if (status >= 0) |
| status = -EIO; |
| |
| pr_err("i2c read error at addr 0x%02x\n", adr); |
| return status; |
| } |
| if (debug > 2) { |
| int i; |
| dprintk(2, ": read from"); |
| for (i = 0; i < len; i++) |
| pr_cont(" %02x", msg[i]); |
| pr_cont(", value = "); |
| for (i = 0; i < alen; i++) |
| pr_cont(" %02x", answ[i]); |
| pr_cont("\n"); |
| } |
| return 0; |
| } |
| |
| static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags) |
| { |
| int status; |
| u8 adr = state->demod_address, mm1[4], mm2[2], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm1[1] = ((reg >> 16) & 0xFF); |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; |
| mm1[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm1[0] = ((reg << 1) & 0xFF); |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); |
| status = i2c_read(state, adr, mm1, len, mm2, 2); |
| if (status < 0) |
| return status; |
| if (data) |
| *data = mm2[0] | (mm2[1] << 8); |
| |
| return 0; |
| } |
| |
| static int read16(struct drxk_state *state, u32 reg, u16 *data) |
| { |
| return read16_flags(state, reg, data, 0); |
| } |
| |
| static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags) |
| { |
| int status; |
| u8 adr = state->demod_address, mm1[4], mm2[4], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm1[1] = ((reg >> 16) & 0xFF); |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; |
| mm1[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm1[0] = ((reg << 1) & 0xFF); |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); |
| status = i2c_read(state, adr, mm1, len, mm2, 4); |
| if (status < 0) |
| return status; |
| if (data) |
| *data = mm2[0] | (mm2[1] << 8) | |
| (mm2[2] << 16) | (mm2[3] << 24); |
| |
| return 0; |
| } |
| |
| static int read32(struct drxk_state *state, u32 reg, u32 *data) |
| { |
| return read32_flags(state, reg, data, 0); |
| } |
| |
| static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags) |
| { |
| u8 adr = state->demod_address, mm[6], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm[1] = ((reg >> 16) & 0xFF); |
| mm[2] = ((reg >> 24) & 0xFF) | flags; |
| mm[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm[0] = ((reg << 1) & 0xFF); |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| mm[len] = data & 0xff; |
| mm[len + 1] = (data >> 8) & 0xff; |
| |
| dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags); |
| return i2c_write(state, adr, mm, len + 2); |
| } |
| |
| static int write16(struct drxk_state *state, u32 reg, u16 data) |
| { |
| return write16_flags(state, reg, data, 0); |
| } |
| |
| static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags) |
| { |
| u8 adr = state->demod_address, mm[8], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm[1] = ((reg >> 16) & 0xFF); |
| mm[2] = ((reg >> 24) & 0xFF) | flags; |
| mm[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm[0] = ((reg << 1) & 0xFF); |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| mm[len] = data & 0xff; |
| mm[len + 1] = (data >> 8) & 0xff; |
| mm[len + 2] = (data >> 16) & 0xff; |
| mm[len + 3] = (data >> 24) & 0xff; |
| dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags); |
| |
| return i2c_write(state, adr, mm, len + 4); |
| } |
| |
| static int write32(struct drxk_state *state, u32 reg, u32 data) |
| { |
| return write32_flags(state, reg, data, 0); |
| } |
| |
| static int write_block(struct drxk_state *state, u32 address, |
| const int block_size, const u8 p_block[]) |
| { |
| int status = 0, blk_size = block_size; |
| u8 flags = 0; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| |
| while (blk_size > 0) { |
| int chunk = blk_size > state->m_chunk_size ? |
| state->m_chunk_size : blk_size; |
| u8 *adr_buf = &state->chunk[0]; |
| u32 adr_length = 0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(address) || (flags != 0)) { |
| adr_buf[0] = (((address << 1) & 0xFF) | 0x01); |
| adr_buf[1] = ((address >> 16) & 0xFF); |
| adr_buf[2] = ((address >> 24) & 0xFF); |
| adr_buf[3] = ((address >> 7) & 0xFF); |
| adr_buf[2] |= flags; |
| adr_length = 4; |
| if (chunk == state->m_chunk_size) |
| chunk -= 2; |
| } else { |
| adr_buf[0] = ((address << 1) & 0xFF); |
| adr_buf[1] = (((address >> 16) & 0x0F) | |
| ((address >> 18) & 0xF0)); |
| adr_length = 2; |
| } |
| memcpy(&state->chunk[adr_length], p_block, chunk); |
| dprintk(2, "(0x%08x, 0x%02x)\n", address, flags); |
| if (debug > 1) { |
| int i; |
| if (p_block) |
| for (i = 0; i < chunk; i++) |
| pr_cont(" %02x", p_block[i]); |
| pr_cont("\n"); |
| } |
| status = i2c_write(state, state->demod_address, |
| &state->chunk[0], chunk + adr_length); |
| if (status < 0) { |
| pr_err("%s: i2c write error at addr 0x%02x\n", |
| __func__, address); |
| break; |
| } |
| p_block += chunk; |
| address += (chunk >> 1); |
| blk_size -= chunk; |
| } |
| return status; |
| } |
| |
| #ifndef DRXK_MAX_RETRIES_POWERUP |
| #define DRXK_MAX_RETRIES_POWERUP 20 |
| #endif |
| |
| static int power_up_device(struct drxk_state *state) |
| { |
| int status; |
| u8 data = 0; |
| u16 retry_count = 0; |
| |
| dprintk(1, "\n"); |
| |
| status = i2c_read1(state, state->demod_address, &data); |
| if (status < 0) { |
| do { |
| data = 0; |
| status = i2c_write(state, state->demod_address, |
| &data, 1); |
| usleep_range(10000, 11000); |
| retry_count++; |
| if (status < 0) |
| continue; |
| status = i2c_read1(state, state->demod_address, |
| &data); |
| } while (status < 0 && |
| (retry_count < DRXK_MAX_RETRIES_POWERUP)); |
| if (status < 0 && retry_count >= DRXK_MAX_RETRIES_POWERUP) |
| goto error; |
| } |
| |
| /* Make sure all clk domains are active */ |
| status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| /* Enable pll lock tests */ |
| status = write16(state, SIO_CC_PLL_LOCK__A, 1); |
| if (status < 0) |
| goto error; |
| |
| state->m_current_power_mode = DRX_POWER_UP; |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| |
| static int init_state(struct drxk_state *state) |
| { |
| /* |
| * FIXME: most (all?) of the values bellow should be moved into |
| * struct drxk_config, as they are probably board-specific |
| */ |
| u32 ul_vsb_if_agc_mode = DRXK_AGC_CTRL_AUTO; |
| u32 ul_vsb_if_agc_output_level = 0; |
| u32 ul_vsb_if_agc_min_level = 0; |
| u32 ul_vsb_if_agc_max_level = 0x7FFF; |
| u32 ul_vsb_if_agc_speed = 3; |
| |
| u32 ul_vsb_rf_agc_mode = DRXK_AGC_CTRL_AUTO; |
| u32 ul_vsb_rf_agc_output_level = 0; |
| u32 ul_vsb_rf_agc_min_level = 0; |
| u32 ul_vsb_rf_agc_max_level = 0x7FFF; |
| u32 ul_vsb_rf_agc_speed = 3; |
| u32 ul_vsb_rf_agc_top = 9500; |
| u32 ul_vsb_rf_agc_cut_off_current = 4000; |
| |
| u32 ul_atv_if_agc_mode = DRXK_AGC_CTRL_AUTO; |
| u32 ul_atv_if_agc_output_level = 0; |
| u32 ul_atv_if_agc_min_level = 0; |
| u32 ul_atv_if_agc_max_level = 0; |
| u32 ul_atv_if_agc_speed = 3; |
| |
| u32 ul_atv_rf_agc_mode = DRXK_AGC_CTRL_OFF; |
| u32 ul_atv_rf_agc_output_level = 0; |
| u32 ul_atv_rf_agc_min_level = 0; |
| u32 ul_atv_rf_agc_max_level = 0; |
| u32 ul_atv_rf_agc_top = 9500; |
| u32 ul_atv_rf_agc_cut_off_current = 4000; |
| u32 ul_atv_rf_agc_speed = 3; |
| |
| u32 ulQual83 = DEFAULT_MER_83; |
| u32 ulQual93 = DEFAULT_MER_93; |
| |
| u32 ul_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; |
| u32 ul_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; |
| |
| /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ |
| /* io_pad_cfg_mode output mode is drive always */ |
| /* io_pad_cfg_drive is set to power 2 (23 mA) */ |
| u32 ul_gpio_cfg = 0x0113; |
| u32 ul_invert_ts_clock = 0; |
| u32 ul_ts_data_strength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; |
| u32 ul_dvbt_bitrate = 50000000; |
| u32 ul_dvbc_bitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; |
| |
| u32 ul_insert_rs_byte = 0; |
| |
| u32 ul_rf_mirror = 1; |
| u32 ul_power_down = 0; |
| |
| dprintk(1, "\n"); |
| |
| state->m_has_lna = false; |
| state->m_has_dvbt = false; |
| state->m_has_dvbc = false; |
| state->m_has_atv = false; |
| state->m_has_oob = false; |
| state->m_has_audio = false; |
| |
| if (!state->m_chunk_size) |
| state->m_chunk_size = 124; |
| |
| state->m_osc_clock_freq = 0; |
| state->m_smart_ant_inverted = false; |
| state->m_b_p_down_open_bridge = false; |
| |
| /* real system clock frequency in kHz */ |
| state->m_sys_clock_freq = 151875; |
| /* Timing div, 250ns/Psys */ |
| /* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */ |
| state->m_hi_cfg_timing_div = ((state->m_sys_clock_freq / 1000) * |
| HI_I2C_DELAY) / 1000; |
| /* Clipping */ |
| if (state->m_hi_cfg_timing_div > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) |
| state->m_hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; |
| state->m_hi_cfg_wake_up_key = (state->demod_address << 1); |
| /* port/bridge/power down ctrl */ |
| state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; |
| |
| state->m_b_power_down = (ul_power_down != 0); |
| |
| state->m_drxk_a3_patch_code = false; |
| |
| /* Init AGC and PGA parameters */ |
| /* VSB IF */ |
| state->m_vsb_if_agc_cfg.ctrl_mode = ul_vsb_if_agc_mode; |
| state->m_vsb_if_agc_cfg.output_level = ul_vsb_if_agc_output_level; |
| state->m_vsb_if_agc_cfg.min_output_level = ul_vsb_if_agc_min_level; |
| state->m_vsb_if_agc_cfg.max_output_level = ul_vsb_if_agc_max_level; |
| state->m_vsb_if_agc_cfg.speed = ul_vsb_if_agc_speed; |
| state->m_vsb_pga_cfg = 140; |
| |
| /* VSB RF */ |
| state->m_vsb_rf_agc_cfg.ctrl_mode = ul_vsb_rf_agc_mode; |
| state->m_vsb_rf_agc_cfg.output_level = ul_vsb_rf_agc_output_level; |
| state->m_vsb_rf_agc_cfg.min_output_level = ul_vsb_rf_agc_min_level; |
| state->m_vsb_rf_agc_cfg.max_output_level = ul_vsb_rf_agc_max_level; |
| state->m_vsb_rf_agc_cfg.speed = ul_vsb_rf_agc_speed; |
| state->m_vsb_rf_agc_cfg.top = ul_vsb_rf_agc_top; |
| state->m_vsb_rf_agc_cfg.cut_off_current = ul_vsb_rf_agc_cut_off_current; |
| state->m_vsb_pre_saw_cfg.reference = 0x07; |
| state->m_vsb_pre_saw_cfg.use_pre_saw = true; |
| |
| state->m_Quality83percent = DEFAULT_MER_83; |
| state->m_Quality93percent = DEFAULT_MER_93; |
| if (ulQual93 <= 500 && ulQual83 < ulQual93) { |
| state->m_Quality83percent = ulQual83; |
| state->m_Quality93percent = ulQual93; |
| } |
| |
| /* ATV IF */ |
| state->m_atv_if_agc_cfg.ctrl_mode = ul_atv_if_agc_mode; |
| state->m_atv_if_agc_cfg.output_level = ul_atv_if_agc_output_level; |
| state->m_atv_if_agc_cfg.min_output_level = ul_atv_if_agc_min_level; |
| state->m_atv_if_agc_cfg.max_output_level = ul_atv_if_agc_max_level; |
| state->m_atv_if_agc_cfg.speed = ul_atv_if_agc_speed; |
| |
| /* ATV RF */ |
| state->m_atv_rf_agc_cfg.ctrl_mode = ul_atv_rf_agc_mode; |
| state->m_atv_rf_agc_cfg.output_level = ul_atv_rf_agc_output_level; |
| state->m_atv_rf_agc_cfg.min_output_level = ul_atv_rf_agc_min_level; |
| state->m_atv_rf_agc_cfg.max_output_level = ul_atv_rf_agc_max_level; |
| state->m_atv_rf_agc_cfg.speed = ul_atv_rf_agc_speed; |
| state->m_atv_rf_agc_cfg.top = ul_atv_rf_agc_top; |
| state->m_atv_rf_agc_cfg.cut_off_current = ul_atv_rf_agc_cut_off_current; |
| state->m_atv_pre_saw_cfg.reference = 0x04; |
| state->m_atv_pre_saw_cfg.use_pre_saw = true; |
| |
| |
| /* DVBT RF */ |
| state->m_dvbt_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF; |
| state->m_dvbt_rf_agc_cfg.output_level = 0; |
| state->m_dvbt_rf_agc_cfg.min_output_level = 0; |
| state->m_dvbt_rf_agc_cfg.max_output_level = 0xFFFF; |
| state->m_dvbt_rf_agc_cfg.top = 0x2100; |
| state->m_dvbt_rf_agc_cfg.cut_off_current = 4000; |
| state->m_dvbt_rf_agc_cfg.speed = 1; |
| |
| |
| /* DVBT IF */ |
| state->m_dvbt_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO; |
| state->m_dvbt_if_agc_cfg.output_level = 0; |
| state->m_dvbt_if_agc_cfg.min_output_level = 0; |
| state->m_dvbt_if_agc_cfg.max_output_level = 9000; |
| state->m_dvbt_if_agc_cfg.top = 13424; |
| state->m_dvbt_if_agc_cfg.cut_off_current = 0; |
| state->m_dvbt_if_agc_cfg.speed = 3; |
| state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay = 30; |
| state->m_dvbt_if_agc_cfg.ingain_tgt_max = 30000; |
| /* state->m_dvbtPgaCfg = 140; */ |
| |
| state->m_dvbt_pre_saw_cfg.reference = 4; |
| state->m_dvbt_pre_saw_cfg.use_pre_saw = false; |
| |
| /* QAM RF */ |
| state->m_qam_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF; |
| state->m_qam_rf_agc_cfg.output_level = 0; |
| state->m_qam_rf_agc_cfg.min_output_level = 6023; |
| state->m_qam_rf_agc_cfg.max_output_level = 27000; |
| state->m_qam_rf_agc_cfg.top = 0x2380; |
| state->m_qam_rf_agc_cfg.cut_off_current = 4000; |
| state->m_qam_rf_agc_cfg.speed = 3; |
| |
| /* QAM IF */ |
| state->m_qam_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO; |
| state->m_qam_if_agc_cfg.output_level = 0; |
| state->m_qam_if_agc_cfg.min_output_level = 0; |
| state->m_qam_if_agc_cfg.max_output_level = 9000; |
| state->m_qam_if_agc_cfg.top = 0x0511; |
| state->m_qam_if_agc_cfg.cut_off_current = 0; |
| state->m_qam_if_agc_cfg.speed = 3; |
| state->m_qam_if_agc_cfg.ingain_tgt_max = 5119; |
| state->m_qam_if_agc_cfg.fast_clip_ctrl_delay = 50; |
| |
| state->m_qam_pga_cfg = 140; |
| state->m_qam_pre_saw_cfg.reference = 4; |
| state->m_qam_pre_saw_cfg.use_pre_saw = false; |
| |
| state->m_operation_mode = OM_NONE; |
| state->m_drxk_state = DRXK_UNINITIALIZED; |
| |
| /* MPEG output configuration */ |
| state->m_enable_mpeg_output = true; /* If TRUE; enable MPEG ouput */ |
| state->m_insert_rs_byte = false; /* If TRUE; insert RS byte */ |
| state->m_invert_data = false; /* If TRUE; invert DATA signals */ |
| state->m_invert_err = false; /* If TRUE; invert ERR signal */ |
| state->m_invert_str = false; /* If TRUE; invert STR signals */ |
| state->m_invert_val = false; /* If TRUE; invert VAL signals */ |
| state->m_invert_clk = (ul_invert_ts_clock != 0); /* If TRUE; invert CLK signals */ |
| |
| /* If TRUE; static MPEG clockrate will be used; |
| otherwise clockrate will adapt to the bitrate of the TS */ |
| |
| state->m_dvbt_bitrate = ul_dvbt_bitrate; |
| state->m_dvbc_bitrate = ul_dvbc_bitrate; |
| |
| state->m_ts_data_strength = (ul_ts_data_strength & 0x07); |
| |
| /* Maximum bitrate in b/s in case static clockrate is selected */ |
| state->m_mpeg_ts_static_bitrate = 19392658; |
| state->m_disable_te_ihandling = false; |
| |
| if (ul_insert_rs_byte) |
| state->m_insert_rs_byte = true; |
| |
| state->m_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; |
| if (ul_mpeg_lock_time_out < 10000) |
| state->m_mpeg_lock_time_out = ul_mpeg_lock_time_out; |
| state->m_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; |
| if (ul_demod_lock_time_out < 10000) |
| state->m_demod_lock_time_out = ul_demod_lock_time_out; |
| |
| /* QAM defaults */ |
| state->m_constellation = DRX_CONSTELLATION_AUTO; |
| state->m_qam_interleave_mode = DRXK_QAM_I12_J17; |
| state->m_fec_rs_plen = 204 * 8; /* fecRsPlen annex A */ |
| state->m_fec_rs_prescale = 1; |
| |
| state->m_sqi_speed = DRXK_DVBT_SQI_SPEED_MEDIUM; |
| state->m_agcfast_clip_ctrl_delay = 0; |
| |
| state->m_gpio_cfg = ul_gpio_cfg; |
| |
| state->m_b_power_down = false; |
| state->m_current_power_mode = DRX_POWER_DOWN; |
| |
| state->m_rfmirror = (ul_rf_mirror == 0); |
| state->m_if_agc_pol = false; |
| return 0; |
| } |
| |
| static int drxx_open(struct drxk_state *state) |
| { |
| int status = 0; |
| u32 jtag = 0; |
| u16 bid = 0; |
| u16 key = 0; |
| |
| dprintk(1, "\n"); |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| /* Check device id */ |
| status = read16(state, SIO_TOP_COMM_KEY__A, &key); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); |
| if (status < 0) |
| goto error; |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, key); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int get_device_capabilities(struct drxk_state *state) |
| { |
| u16 sio_pdr_ohw_cfg = 0; |
| u32 sio_top_jtagid_lo = 0; |
| int status; |
| const char *spin = ""; |
| |
| dprintk(1, "\n"); |
| |
| /* driver 0.9.0 */ |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); |
| if (status < 0) |
| goto error; |
| |
| switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { |
| case 0: |
| /* ignore (bypass ?) */ |
| break; |
| case 1: |
| /* 27 MHz */ |
| state->m_osc_clock_freq = 27000; |
| break; |
| case 2: |
| /* 20.25 MHz */ |
| state->m_osc_clock_freq = 20250; |
| break; |
| case 3: |
| /* 4 MHz */ |
| state->m_osc_clock_freq = 20250; |
| break; |
| default: |
| pr_err("Clock Frequency is unknown\n"); |
| return -EINVAL; |
| } |
| /* |
| Determine device capabilities |
| Based on pinning v14 |
| */ |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo); |
| if (status < 0) |
| goto error; |
| |
| pr_info("status = 0x%08x\n", sio_top_jtagid_lo); |
| |
| /* driver 0.9.0 */ |
| switch ((sio_top_jtagid_lo >> 29) & 0xF) { |
| case 0: |
| state->m_device_spin = DRXK_SPIN_A1; |
| spin = "A1"; |
| break; |
| case 2: |
| state->m_device_spin = DRXK_SPIN_A2; |
| spin = "A2"; |
| break; |
| case 3: |
| state->m_device_spin = DRXK_SPIN_A3; |
| spin = "A3"; |
| break; |
| default: |
| state->m_device_spin = DRXK_SPIN_UNKNOWN; |
| status = -EINVAL; |
| pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF); |
| goto error2; |
| } |
| switch ((sio_top_jtagid_lo >> 12) & 0xFF) { |
| case 0x13: |
| /* typeId = DRX3913K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = false; |
| state->m_has_audio = false; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = true; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = false; |
| state->m_has_gpio1 = false; |
| state->m_has_irqn = false; |
| break; |
| case 0x15: |
| /* typeId = DRX3915K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = false; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = false; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x16: |
| /* typeId = DRX3916K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = false; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = false; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x18: |
| /* typeId = DRX3918K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = true; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = false; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x21: |
| /* typeId = DRX3921K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = true; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = true; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x23: |
| /* typeId = DRX3923K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = true; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = true; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x25: |
| /* typeId = DRX3925K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = true; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = true; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| case 0x26: |
| /* typeId = DRX3926K_TYPE_ID */ |
| state->m_has_lna = false; |
| state->m_has_oob = false; |
| state->m_has_atv = true; |
| state->m_has_audio = false; |
| state->m_has_dvbt = true; |
| state->m_has_dvbc = true; |
| state->m_has_sawsw = true; |
| state->m_has_gpio2 = true; |
| state->m_has_gpio1 = true; |
| state->m_has_irqn = false; |
| break; |
| default: |
| pr_err("DeviceID 0x%02x not supported\n", |
| ((sio_top_jtagid_lo >> 12) & 0xFF)); |
| status = -EINVAL; |
| goto error2; |
| } |
| |
| pr_info("detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n", |
| ((sio_top_jtagid_lo >> 12) & 0xFF), spin, |
| state->m_osc_clock_freq / 1000, |
| state->m_osc_clock_freq % 1000); |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| error2: |
| return status; |
| } |
| |
| static int hi_command(struct drxk_state *state, u16 cmd, u16 *p_result) |
| { |
| int status; |
| bool powerdown_cmd; |
| |
| dprintk(1, "\n"); |
| |
| /* Write command */ |
| status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd); |
| if (status < 0) |
| goto error; |
| if (cmd == SIO_HI_RA_RAM_CMD_RESET) |
| usleep_range(1000, 2000); |
| |
| powerdown_cmd = |
| (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) && |
| ((state->m_hi_cfg_ctrl) & |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) == |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); |
| if (!powerdown_cmd) { |
| /* Wait until command rdy */ |
| u32 retry_count = 0; |
| u16 wait_cmd; |
| |
| do { |
| usleep_range(1000, 2000); |
| retry_count += 1; |
| status = read16(state, SIO_HI_RA_RAM_CMD__A, |
| &wait_cmd); |
| } while ((status < 0) && (retry_count < DRXK_MAX_RETRIES) |
| && (wait_cmd != 0)); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_HI_RA_RAM_RES__A, p_result); |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int hi_cfg_command(struct drxk_state *state) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| mutex_lock(&state->mutex); |
| |
| status = write16(state, SIO_HI_RA_RAM_PAR_6__A, |
| state->m_hi_cfg_timeout); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_5__A, |
| state->m_hi_cfg_ctrl); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_4__A, |
| state->m_hi_cfg_wake_up_key); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_3__A, |
| state->m_hi_cfg_bridge_delay); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, |
| state->m_hi_cfg_timing_div); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, |
| SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); |
| if (status < 0) |
| goto error; |
| status = hi_command(state, SIO_HI_RA_RAM_CMD_CONFIG, NULL); |
| if (status < 0) |
| goto error; |
| |
| state->m_hi_cfg_ctrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; |
| error: |
| mutex_unlock(&state->mutex); |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int init_hi(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| state->m_hi_cfg_wake_up_key = (state->demod_address << 1); |
| state->m_hi_cfg_timeout = 0x96FF; |
| /* port/bridge/power down ctrl */ |
| state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; |
| |
| return hi_cfg_command(state); |
| } |
| |
| static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable) |
| { |
| int status = -1; |
| u16 sio_pdr_mclk_cfg = 0; |
| u16 sio_pdr_mdx_cfg = 0; |
| u16 err_cfg = 0; |
| |
| dprintk(1, ": mpeg %s, %s mode\n", |
| mpeg_enable ? "enable" : "disable", |
| state->m_enable_parallel ? "parallel" : "serial"); |
| |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| |
| /* MPEG TS pad configuration */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); |
| if (status < 0) |
| goto error; |
| |
| if (!mpeg_enable) { |
| /* Set MPEG TS pads to inputmode */ |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| } else { |
| /* Enable MPEG output */ |
| sio_pdr_mdx_cfg = |
| ((state->m_ts_data_strength << |
| SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003); |
| sio_pdr_mclk_cfg = ((state->m_ts_clockk_strength << |
| SIO_PDR_MCLK_CFG_DRIVE__B) | |
| 0x0003); |
| |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| |
| if (state->enable_merr_cfg) |
| err_cfg = sio_pdr_mdx_cfg; |
| |
| status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); |
| if (status < 0) |
| goto error; |
| |
| if (state->m_enable_parallel) { |
| /* parallel -> enable MD1 to MD7 */ |
| status = write16(state, SIO_PDR_MD1_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, |
| sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| } else { |
| sio_pdr_mdx_cfg = ((state->m_ts_data_strength << |
| SIO_PDR_MD0_CFG_DRIVE__B) |
| | 0x0003); |
| /* serial -> disable MD1 to MD7 */ |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| } |
| status = write16(state, SIO_PDR_MCLK_CFG__A, sio_pdr_mclk_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD0_CFG__A, sio_pdr_mdx_cfg); |
| if (status < 0) |
| goto error; |
| } |
| /* Enable MB output over MPEG pads and ctl input */ |
| status = write16(state, SIO_PDR_MON_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| /* Write nomagic word to enable pdr reg write */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int mpegts_disable(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| return mpegts_configure_pins(state, false); |
| } |
| |
| static int bl_chain_cmd(struct drxk_state *state, |
| u16 rom_offset, u16 nr_of_elements, u32 time_out) |
| { |
| u16 bl_status = 0; |
| int status; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| mutex_lock(&state->mutex); |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_CHAIN_ADDR__A, rom_offset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_CHAIN_LEN__A, nr_of_elements); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); |
| if (status < 0) |
| goto error; |
| |
| end = jiffies + msecs_to_jiffies(time_out); |
| do { |
| usleep_range(1000, 2000); |
| status = read16(state, SIO_BL_STATUS__A, &bl_status); |
| if (status < 0) |
| goto error; |
| } while ((bl_status == 0x1) && |
| ((time_is_after_jiffies(end)))); |
| |
| if (bl_status == 0x1) { |
| pr_err("SIO not ready\n"); |
| status = -EINVAL; |
| goto error2; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| } |
| |
| |
| static int download_microcode(struct drxk_state *state, |
| const u8 p_mc_image[], u32 length) |
| { |
| const u8 *p_src = p_mc_image; |
| u32 address; |
| u16 n_blocks; |
| u16 block_size; |
| u32 offset = 0; |
| u32 i; |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* down the drain (we don't care about MAGIC_WORD) */ |
| #if 0 |
| /* For future reference */ |
| drain = (p_src[0] << 8) | p_src[1]; |
| #endif |
| p_src += sizeof(u16); |
| offset += sizeof(u16); |
| n_blocks = (p_src[0] << 8) | p_src[1]; |
| p_src += sizeof(u16); |
| offset += sizeof(u16); |
| |
| for (i = 0; i < n_blocks; i += 1) { |
| address = (p_src[0] << 24) | (p_src[1] << 16) | |
| (p_src[2] << 8) | p_src[3]; |
| p_src += sizeof(u32); |
| offset += sizeof(u32); |
| |
| block_size = ((p_src[0] << 8) | p_src[1]) * sizeof(u16); |
| p_src += sizeof(u16); |
| offset += sizeof(u16); |
| |
| #if 0 |
| /* For future reference */ |
| flags = (p_src[0] << 8) | p_src[1]; |
| #endif |
| p_src += sizeof(u16); |
| offset += sizeof(u16); |
| |
| #if 0 |
| /* For future reference */ |
| block_crc = (p_src[0] << 8) | p_src[1]; |
| #endif |
| p_src += sizeof(u16); |
| offset += sizeof(u16); |
| |
| if (offset + block_size > length) { |
| pr_err("Firmware is corrupted.\n"); |
| return -EINVAL; |
| } |
| |
| status = write_block(state, address, block_size, p_src); |
| if (status < 0) { |
| pr_err("Error %d while loading firmware\n", status); |
| break; |
| } |
| p_src += block_size; |
| offset += block_size; |
| } |
| return status; |
| } |
| |
| static int dvbt_enable_ofdm_token_ring(struct drxk_state *state, bool enable) |
| { |
| int status; |
| u16 data = 0; |
| u16 desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON; |
| u16 desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| |
| if (!enable) { |
| desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF; |
| desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN; |
| } |
| |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); |
| if (status >= 0 && data == desired_status) { |
| /* tokenring already has correct status */ |
| return status; |
| } |
| /* Disable/enable dvbt tokenring bridge */ |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desired_ctrl); |
| |
| end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT); |
| do { |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); |
| if ((status >= 0 && data == desired_status) |
| || time_is_after_jiffies(end)) |
| break; |
| usleep_range(1000, 2000); |
| } while (1); |
| if (data != desired_status) { |
| pr_err("SIO not ready\n"); |
| return -EINVAL; |
| } |
| return status; |
| } |
| |
| static int mpegts_stop(struct drxk_state *state) |
| { |
| int status = 0; |
| u16 fec_oc_snc_mode = 0; |
| u16 fec_oc_ipr_mode = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* Graceful shutdown (byte boundaries) */ |
| status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); |
| if (status < 0) |
| goto error; |
| fec_oc_snc_mode |= FEC_OC_SNC_MODE_SHUTDOWN__M; |
| status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode); |
| if (status < 0) |
| goto error; |
| |
| /* Suppress MCLK during absence of data */ |
| status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode); |
| if (status < 0) |
| goto error; |
| fec_oc_ipr_mode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M; |
| status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode); |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int scu_command(struct drxk_state *state, |
| u16 cmd, u8 parameter_len, |
| u16 *parameter, u8 result_len, u16 *result) |
| { |
| #if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15 |
| #error DRXK register mapping no longer compatible with this routine! |
| #endif |
| u16 cur_cmd = 0; |
| int status = -EINVAL; |
| unsigned long end; |
| u8 buffer[34]; |
| int cnt = 0, ii; |
| const char *p; |
| char errname[30]; |
| |
| dprintk(1, "\n"); |
| |
| if ((cmd == 0) || ((parameter_len > 0) && (parameter == NULL)) || |
| ((result_len > 0) && (result == NULL))) { |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| mutex_lock(&state->mutex); |
| |
| /* assume that the command register is ready |
| since it is checked afterwards */ |
| for (ii = parameter_len - 1; ii >= 0; ii -= 1) { |
| buffer[cnt++] = (parameter[ii] & 0xFF); |
| buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF); |
| } |
| buffer[cnt++] = (cmd & 0xFF); |
| buffer[cnt++] = ((cmd >> 8) & 0xFF); |
| |
| write_block(state, SCU_RAM_PARAM_0__A - |
| (parameter_len - 1), cnt, buffer); |
| /* Wait until SCU has processed command */ |
| end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME); |
| do { |
| usleep_range(1000, 2000); |
| status = read16(state, SCU_RAM_COMMAND__A, &cur_cmd); |
| if (status < 0) |
| goto error; |
| } while (!(cur_cmd == DRX_SCU_READY) && (time_is_after_jiffies(end))); |
| if (cur_cmd != DRX_SCU_READY) { |
| pr_err("SCU not ready\n"); |
| status = -EIO; |
| goto error2; |
| } |
| /* read results */ |
| if ((result_len > 0) && (result != NULL)) { |
| s16 err; |
| int ii; |
| |
| for (ii = result_len - 1; ii >= 0; ii -= 1) { |
| status = read16(state, SCU_RAM_PARAM_0__A - ii, |
| &result[ii]); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* Check if an error was reported by SCU */ |
| err = (s16)result[0]; |
| if (err >= 0) |
| goto error; |
| |
| /* check for the known error codes */ |
| switch (err) { |
| case SCU_RESULT_UNKCMD: |
| p = "SCU_RESULT_UNKCMD"; |
| break; |
| case SCU_RESULT_UNKSTD: |
| p = "SCU_RESULT_UNKSTD"; |
| break; |
| case SCU_RESULT_SIZE: |
| p = "SCU_RESULT_SIZE"; |
| break; |
| case SCU_RESULT_INVPAR: |
| p = "SCU_RESULT_INVPAR"; |
| break; |
| default: /* Other negative values are errors */ |
| sprintf(errname, "ERROR: %d\n", err); |
| p = errname; |
| } |
| pr_err("%s while sending cmd 0x%04x with params:", p, cmd); |
| print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt); |
| status = -EINVAL; |
| goto error2; |
| } |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| } |
| |
| static int set_iqm_af(struct drxk_state *state, bool active) |
| { |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* Configure IQM */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| |
| if (!active) { |
| data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY |
| | IQM_AF_STDBY_STDBY_AMP_STANDBY |
| | IQM_AF_STDBY_STDBY_PD_STANDBY |
| | IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY |
| | IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY); |
| } else { |
| data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_AMP_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_PD_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY) |
| ); |
| } |
| status = write16(state, IQM_AF_STDBY__A, data); |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int ctrl_power_mode(struct drxk_state *state, enum drx_power_mode *mode) |
| { |
| int status = 0; |
| u16 sio_cc_pwd_mode = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* Check arguments */ |
| if (mode == NULL) |
| return -EINVAL; |
| |
| switch (*mode) { |
| case DRX_POWER_UP: |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE; |
| break; |
| case DRXK_POWER_DOWN_OFDM: |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OFDM; |
| break; |
| case DRXK_POWER_DOWN_CORE: |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK; |
| break; |
| case DRXK_POWER_DOWN_PLL: |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL; |
| break; |
| case DRX_POWER_DOWN: |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC; |
| break; |
| default: |
| /* Unknow sleep mode */ |
| return -EINVAL; |
| } |
| |
| /* If already in requested power mode, do nothing */ |
| if (state->m_current_power_mode == *mode) |
| return 0; |
| |
| /* For next steps make sure to start from DRX_POWER_UP mode */ |
| if (state->m_current_power_mode != DRX_POWER_UP) { |
| status = power_up_device(state); |
| if (status < 0) |
| goto error; |
| status = dvbt_enable_ofdm_token_ring(state, true); |
| if (status < 0) |
| goto error; |
| } |
| |
| if (*mode == DRX_POWER_UP) { |
| /* Restore analog & pin configuartion */ |
| } else { |
| /* Power down to requested mode */ |
| /* Backup some register settings */ |
| /* Set pins with possible pull-ups connected |
| to them in input mode */ |
| /* Analog power down */ |
| /* ADC power down */ |
| /* Power down device */ |
| /* stop all comm_exec */ |
| /* Stop and power down previous standard */ |
| switch (state->m_operation_mode) { |
| case OM_DVBT: |
| status = mpegts_stop(state); |
| if (status < 0) |
| goto error; |
| status = power_down_dvbt(state, false); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| status = mpegts_stop(state); |
| if (status < 0) |
| goto error; |
| status = power_down_qam(state); |
| if (status < 0) |
| goto error; |
| break; |
| default: |
| break; |
| } |
| status = dvbt_enable_ofdm_token_ring(state, false); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| |
| if (*mode != DRXK_POWER_DOWN_OFDM) { |
| state->m_hi_cfg_ctrl |= |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; |
| status = hi_cfg_command(state); |
| if (status < 0) |
| goto error; |
| } |
| } |
| state->m_current_power_mode = *mode; |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode) |
| { |
| enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM; |
| u16 cmd_result = 0; |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| status = read16(state, SCU_COMM_EXEC__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == SCU_COMM_EXEC_ACTIVE) { |
| /* Send OFDM stop command */ |
| status = scu_command(state, |
| SCU_RAM_COMMAND_STANDARD_OFDM |
| | SCU_RAM_COMMAND_CMD_DEMOD_STOP, |
| 0, NULL, 1, &cmd_result); |
| if (status < 0) |
| goto error; |
| /* Send OFDM reset command */ |
| status = scu_command(state, |
| SCU_RAM_COMMAND_STANDARD_OFDM |
| | SCU_RAM_COMMAND_CMD_DEMOD_RESET, |
| 0, NULL, 1, &cmd_result); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* Reset datapath for OFDM, processors first */ |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); |
| if (status < 0) |
| goto error; |
| |
| /* powerdown AFE */ |
| status = set_iqm_af(state, false); |
| if (status < 0) |
| goto error; |
| |
| /* powerdown to OFDM mode */ |
| if (set_power_mode) { |
| status = ctrl_power_mode(state, &power_mode); |
| if (status < 0) |
| goto error; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int setoperation_mode(struct drxk_state *state, |
| enum operation_mode o_mode) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* |
| Stop and power down previous standard |
| TODO investigate total power down instead of partial |
| power down depending on "previous" standard. |
| */ |
| |
| /* disable HW lock indicator */ |
| status = write16(state, SCU_RAM_GPIO__A, |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| |
| /* Device is already at the required mode */ |
| if (state->m_operation_mode == o_mode) |
| return 0; |
| |
| switch (state->m_operation_mode) { |
| /* OM_NONE was added for start up */ |
| case OM_NONE: |
| break; |
| case OM_DVBT: |
| status = mpegts_stop(state); |
| if (status < 0) |
| goto error; |
| status = power_down_dvbt(state, true); |
| if (status < 0) |
| goto error; |
| state->m_operation_mode = OM_NONE; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| status = mpegts_stop(state); |
| if (status < 0) |
| goto error; |
| status = power_down_qam(state); |
| if (status < 0) |
| goto error; |
| state->m_operation_mode = OM_NONE; |
| break; |
| case OM_QAM_ITU_B: |
| default: |
| status = -EINVAL; |
| goto error; |
| } |
| |
| /* |
| Power up new standard |
| */ |
| switch (o_mode) { |
| case OM_DVBT: |
| dprintk(1, ": DVB-T\n"); |
| state->m_operation_mode = o_mode; |
| status = set_dvbt_standard(state, o_mode); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| dprintk(1, ": DVB-C Annex %c\n", |
| (state->m_operation_mode == OM_QAM_ITU_A) ? 'A' : 'C'); |
| state->m_operation_mode = o_mode; |
| status = set_qam_standard(state, o_mode); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_B: |
| default: |
| status = -EINVAL; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int start(struct drxk_state *state, s32 offset_freq, |
| s32 intermediate_frequency) |
| { |
| int status = -EINVAL; |
| |
| u16 i_freqk_hz; |
| s32 offsetk_hz = offset_freq / 1000; |
| |
| dprintk(1, "\n"); |
| if (state->m_drxk_state != DRXK_STOPPED && |
| state->m_drxk_state != DRXK_DTV_STARTED) |
| goto error; |
| |
| state->m_b_mirror_freq_spect = (state->props.inversion == INVERSION_ON); |
| |
| if (intermediate_frequency < 0) { |
| state->m_b_mirror_freq_spect = !state->m_b_mirror_freq_spect; |
| intermediate_frequency = -intermediate_frequency; |
| } |
| |
| switch (state->m_operation_mode) { |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| i_freqk_hz = (intermediate_frequency / 1000); |
| status = set_qam(state, i_freqk_hz, offsetk_hz); |
| if (status < 0) |
| goto error; |
| state->m_drxk_state = DRXK_DTV_STARTED; |
| break; |
| case OM_DVBT: |
| i_freqk_hz = (intermediate_frequency / 1000); |
| status = mpegts_stop(state); |
| if (status < 0) |
| goto error; |
| status = set_dvbt(state, i_freqk_hz, offsetk_hz); |
| if (status < 0) |
| goto error; |
| status = dvbt_start(state); |
| if (status < 0) |
| goto error; |
| state->m_drxk_state = DRXK_DTV_STARTED; |
| break; |
| default: |
| break; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int shut_down(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| mpegts_stop(state); |
| return 0; |
| } |
| |
| static int get_lock_status(struct drxk_state *state, u32 *p_lock_status) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if (p_lock_status == NULL) |
| goto error; |
| |
| *p_lock_status = NOT_LOCKED; |
| |
| /* define the SCU command code */ |
| switch (state->m_operation_mode) { |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_B: |
| case OM_QAM_ITU_C: |
| status = get_qam_lock_status(state, p_lock_status); |
| break; |
| case OM_DVBT: |
| status = get_dvbt_lock_status(state, p_lock_status); |
| break; |
| default: |
| break; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int mpegts_start(struct drxk_state *state) |
| { |
| int status; |
| |
| u16 fec_oc_snc_mode = 0; |
| |
| /* Allow OC to sync again */ |
| status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); |
| if (status < 0) |
| goto error; |
| fec_oc_snc_mode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M; |
| status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_UNLOCK__A, 1); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int mpegts_dto_init(struct drxk_state *state) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* Rate integration settings */ |
| status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4); |
| if (status < 0) |
| goto error; |
| |
| /* Additional configuration */ |
| status = write16(state, FEC_OC_OCR_INVERT__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_LWM__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_HWM__A, 12); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int mpegts_dto_setup(struct drxk_state *state, |
| enum operation_mode o_mode) |
| { |
| int status; |
| |
| u16 fec_oc_reg_mode = 0; /* FEC_OC_MODE register value */ |
| u16 fec_oc_reg_ipr_mode = 0; /* FEC_OC_IPR_MODE register value */ |
| u16 fec_oc_dto_mode = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fec_oc_fct_mode = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fec_oc_dto_period = 2; /* FEC_OC_IPR_INVERT register value */ |
| u16 fec_oc_dto_burst_len = 188; /* FEC_OC_IPR_INVERT register value */ |
| u32 fec_oc_rcn_ctl_rate = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fec_oc_tmd_mode = 0; |
| u16 fec_oc_tmd_int_upd_rate = 0; |
| u32 max_bit_rate = 0; |
| bool static_clk = false; |
| |
| dprintk(1, "\n"); |
| |
| /* Check insertion of the Reed-Solomon parity bytes */ |
| status = read16(state, FEC_OC_MODE__A, &fec_oc_reg_mode); |
| if (status < 0) |
| goto error; |
| status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode); |
| if (status < 0) |
| goto error; |
| fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M); |
| fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); |
| if (state->m_insert_rs_byte) { |
| /* enable parity symbol forward */ |
| fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M; |
| /* MVAL disable during parity bytes */ |
| fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; |
| /* TS burst length to 204 */ |
| fec_oc_dto_burst_len = 204; |
| } |
| |
| /* Check serial or parallel output */ |
| fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); |
| if (!state->m_enable_parallel) { |
| /* MPEG data output is serial -> set ipr_mode[0] */ |
| fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M; |
| } |
| |
| switch (o_mode) { |
| case OM_DVBT: |
| max_bit_rate = state->m_dvbt_bitrate; |
| fec_oc_tmd_mode = 3; |
| fec_oc_rcn_ctl_rate = 0xC00000; |
| static_clk = state->m_dvbt_static_clk; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| fec_oc_tmd_mode = 0x0004; |
| fec_oc_rcn_ctl_rate = 0xD2B4EE; /* good for >63 Mb/s */ |
| max_bit_rate = state->m_dvbc_bitrate; |
| static_clk = state->m_dvbc_static_clk; |
| break; |
| default: |
| status = -EINVAL; |
| } /* switch (standard) */ |
| if (status < 0) |
| goto error; |
| |
| /* Configure DTO's */ |
| if (static_clk) { |
| u32 bit_rate = 0; |
| |
| /* Rational DTO for MCLK source (static MCLK rate), |
| Dynamic DTO for optimal grouping |
| (avoid intra-packet gaps), |
| DTO offset enable to sync TS burst with MSTRT */ |
| fec_oc_dto_mode = (FEC_OC_DTO_MODE_DYNAMIC__M | |
| FEC_OC_DTO_MODE_OFFSET_ENABLE__M); |
| fec_oc_fct_mode = (FEC_OC_FCT_MODE_RAT_ENA__M | |
| FEC_OC_FCT_MODE_VIRT_ENA__M); |
| |
| /* Check user defined bitrate */ |
| bit_rate = max_bit_rate; |
| if (bit_rate > 75900000UL) { /* max is 75.9 Mb/s */ |
| bit_rate = 75900000UL; |
| } |
| /* Rational DTO period: |
| dto_period = (Fsys / bitrate) - 2 |
| |
| result should be floored, |
| to make sure >= requested bitrate |
| */ |
| fec_oc_dto_period = (u16) (((state->m_sys_clock_freq) |
| * 1000) / bit_rate); |
| if (fec_oc_dto_period <= 2) |
| fec_oc_dto_period = 0; |
| else |
| fec_oc_dto_period -= 2; |
| fec_oc_tmd_int_upd_rate = 8; |
| } else { |
| /* (commonAttr->static_clk == false) => dynamic mode */ |
| fec_oc_dto_mode = FEC_OC_DTO_MODE_DYNAMIC__M; |
| fec_oc_fct_mode = FEC_OC_FCT_MODE__PRE; |
| fec_oc_tmd_int_upd_rate = 5; |
| } |
| |
| /* Write appropriate registers with requested configuration */ |
| status = write16(state, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_DTO_MODE__A, fec_oc_dto_mode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_FCT_MODE__A, fec_oc_fct_mode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_MODE__A, fec_oc_reg_mode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode); |
| if (status < 0) |
| goto error; |
| |
| /* Rate integration settings */ |
| status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fec_oc_rcn_ctl_rate); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, |
| fec_oc_tmd_int_upd_rate); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_MODE__A, fec_oc_tmd_mode); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int mpegts_configure_polarity(struct drxk_state *state) |
| { |
| u16 fec_oc_reg_ipr_invert = 0; |
| |
| /* Data mask for the output data byte */ |
| u16 invert_data_mask = |
| FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | |
| FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | |
| FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | |
| FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; |
| |
| dprintk(1, "\n"); |
| |
| /* Control selective inversion of output bits */ |
| fec_oc_reg_ipr_invert &= (~(invert_data_mask)); |
| if (state->m_invert_data) |
| fec_oc_reg_ipr_invert |= invert_data_mask; |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M)); |
| if (state->m_invert_err) |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M; |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); |
| if (state->m_invert_str) |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M; |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); |
| if (state->m_invert_val) |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M; |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); |
| if (state->m_invert_clk) |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M; |
| |
| return write16(state, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert); |
| } |
| |
| #define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000 |
| |
| static int set_agc_rf(struct drxk_state *state, |
| struct s_cfg_agc *p_agc_cfg, bool is_dtv) |
| { |
| int status = -EINVAL; |
| u16 data = 0; |
| struct s_cfg_agc *p_if_agc_settings; |
| |
| dprintk(1, "\n"); |
| |
| if (p_agc_cfg == NULL) |
| goto error; |
| |
| switch (p_agc_cfg->ctrl_mode) { |
| case DRXK_AGC_CTRL_AUTO: |
| /* Enable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Enable SCU RF AGC loop */ |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_rf_agc_pol) |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Set speed (using complementary reduction value) */ |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); |
| if (status < 0) |
| goto error; |
| |
| data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; |
| data |= (~(p_agc_cfg->speed << |
| SCU_RAM_AGC_KI_RED_RAGC_RED__B) |
| & SCU_RAM_AGC_KI_RED_RAGC_RED__M); |
| |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); |
| if (status < 0) |
| goto error; |
| |
| if (is_dvbt(state)) |
| p_if_agc_settings = &state->m_dvbt_if_agc_cfg; |
| else if (is_qam(state)) |
| p_if_agc_settings = &state->m_qam_if_agc_cfg; |
| else |
| p_if_agc_settings = &state->m_atv_if_agc_cfg; |
| if (p_if_agc_settings == NULL) { |
| status = -EINVAL; |
| goto error; |
| } |
| |
| /* Set TOP, only if IF-AGC is in AUTO mode */ |
| if (p_if_agc_settings->ctrl_mode == DRXK_AGC_CTRL_AUTO) { |
| status = write16(state, |
| SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, |
| p_agc_cfg->top); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* Cut-Off current */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, |
| p_agc_cfg->cut_off_current); |
| if (status < 0) |
| goto error; |
| |
| /* Max. output level */ |
| status = write16(state, SCU_RAM_AGC_RF_MAX__A, |
| p_agc_cfg->max_output_level); |
| if (status < 0) |
| goto error; |
| |
| break; |
| |
| case DRXK_AGC_CTRL_USER: |
| /* Enable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU RF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| if (state->m_rf_agc_pol) |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* SCU c.o.c. to 0, enabling full control range */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0); |
| if (status < 0) |
| goto error; |
| |
| /* Write value to output pin */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, |
| p_agc_cfg->output_level); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_OFF: |
| /* Disable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU RF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| break; |
| |
| default: |
| status = -EINVAL; |
| |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| #define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000 |
| |
| static int set_agc_if(struct drxk_state *state, |
| struct s_cfg_agc *p_agc_cfg, bool is_dtv) |
| { |
| u16 data = 0; |
| int status = 0; |
| struct s_cfg_agc *p_rf_agc_settings; |
| |
| dprintk(1, "\n"); |
| |
| switch (p_agc_cfg->ctrl_mode) { |
| case DRXK_AGC_CTRL_AUTO: |
| |
| /* Enable IF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Enable SCU IF AGC loop */ |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_if_agc_pol) |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Set speed (using complementary reduction value) */ |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; |
| data |= (~(p_agc_cfg->speed << |
| SCU_RAM_AGC_KI_RED_IAGC_RED__B) |
| & SCU_RAM_AGC_KI_RED_IAGC_RED__M); |
| |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); |
| if (status < 0) |
| goto error; |
| |
| if (is_qam(state)) |
| p_rf_agc_settings = &state->m_qam_rf_agc_cfg; |
| else |
| p_rf_agc_settings = &state->m_atv_rf_agc_cfg; |
| if (p_rf_agc_settings == NULL) |
| return -1; |
| /* Restore TOP */ |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, |
| p_rf_agc_settings->top); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_USER: |
| |
| /* Enable IF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU IF AGC loop */ |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_if_agc_pol) |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Write value to output pin */ |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, |
| p_agc_cfg->output_level); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_OFF: |
| |
| /* Disable If AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU IF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| break; |
| } /* switch (agcSettingsIf->ctrl_mode) */ |
| |
| /* always set the top to support |
| configurations without if-loop */ |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_cfg->top); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int get_qam_signal_to_noise(struct drxk_state *state, |
| s32 *p_signal_to_noise) |
| { |
| int status = 0; |
| u16 qam_sl_err_power = 0; /* accum. error between |
| raw and sliced symbols */ |
| u32 qam_sl_sig_power = 0; /* used for MER, depends of |
| QAM modulation */ |
| u32 qam_sl_mer = 0; /* QAM MER */ |
| |
| dprintk(1, "\n"); |
| |
| /* MER calculation */ |
| |
| /* get the register value needed for MER */ |
| status = read16(state, QAM_SL_ERR_POWER__A, &qam_sl_err_power); |
| if (status < 0) { |
| pr_err("Error %d on %s\n", status, __func__); |
| return -EINVAL; |
| } |
| |
| switch (state->props.modulation) { |
| case QAM_16: |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM16 << 2; |
| break; |
| case QAM_32: |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM32 << 2; |
| break; |
| case QAM_64: |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM64 << 2; |
| break; |
| case QAM_128: |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM128 << 2; |
| break; |
| default: |
| case QAM_256: |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM256 << 2; |
| break; |
| } |
| |
| if (qam_sl_err_power > 0) { |
| qam_sl_mer = log10times100(qam_sl_sig_power) - |
| log10times100((u32) qam_sl_err_power); |
| } |
| *p_signal_to_noise = qam_sl_mer; |
| |
| return status; |
| } |
| |
| static int get_dvbt_signal_to_noise(struct drxk_state *state, |
| s32 *p_signal_to_noise) |
| { |
| int status; |
| u16 reg_data = 0; |
| u32 eq_reg_td_sqr_err_i = 0; |
| u32 eq_reg_td_sqr_err_q = 0; |
| u16 eq_reg_td_sqr_err_exp = 0; |
| u16 eq_reg_td_tps_pwr_ofs = 0; |
| u16 eq_reg_td_req_smb_cnt = 0; |
| u32 tps_cnt = 0; |
| u32 sqr_err_iq = 0; |
| u32 a = 0; |
| u32 b = 0; |
| u32 c = 0; |
| u32 i_mer = 0; |
| u16 transmission_params = 0; |
| |
| dprintk(1, "\n"); |
| |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, |
| &eq_reg_td_tps_pwr_ofs); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, |
| &eq_reg_td_req_smb_cnt); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, |
| &eq_reg_td_sqr_err_exp); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, |
| ®_data); |
| if (status < 0) |
| goto error; |
| /* Extend SQR_ERR_I operational range */ |
| eq_reg_td_sqr_err_i = (u32) reg_data; |
| if ((eq_reg_td_sqr_err_exp > 11) && |
| (eq_reg_td_sqr_err_i < 0x00000FFFUL)) { |
| eq_reg_td_sqr_err_i += 0x00010000UL; |
| } |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®_data); |
| if (status < 0) |
| goto error; |
| /* Extend SQR_ERR_Q operational range */ |
| eq_reg_td_sqr_err_q = (u32) reg_data; |
| if ((eq_reg_td_sqr_err_exp > 11) && |
| (eq_reg_td_sqr_err_q < 0x00000FFFUL)) |
| eq_reg_td_sqr_err_q += 0x00010000UL; |
| |
| status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, |
| &transmission_params); |
| if (status < 0) |
| goto error; |
| |
| /* Check input data for MER */ |
| |
| /* MER calculation (in 0.1 dB) without math.h */ |
| if ((eq_reg_td_tps_pwr_ofs == 0) || (eq_reg_td_req_smb_cnt == 0)) |
| i_mer = 0; |
| else if ((eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) == 0) { |
| /* No error at all, this must be the HW reset value |
| * Apparently no first measurement yet |
| * Set MER to 0.0 */ |
| i_mer = 0; |
| } else { |
| sqr_err_iq = (eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) << |
| eq_reg_td_sqr_err_exp; |
| if ((transmission_params & |
| OFDM_SC_RA_RAM_OP_PARAM_MODE__M) |
| == OFDM_SC_RA_RAM_OP_PARAM_MODE_2K) |
| tps_cnt = 17; |
| else |
| tps_cnt = 68; |
| |
| /* IMER = 100 * log10 (x) |
| where x = (eq_reg_td_tps_pwr_ofs^2 * |
| eq_reg_td_req_smb_cnt * tps_cnt)/sqr_err_iq |
| |
| => IMER = a + b -c |
| where a = 100 * log10 (eq_reg_td_tps_pwr_ofs^2) |
| b = 100 * log10 (eq_reg_td_req_smb_cnt * tps_cnt) |
| c = 100 * log10 (sqr_err_iq) |
| */ |
| |
| /* log(x) x = 9bits * 9bits->18 bits */ |
| a = log10times100(eq_reg_td_tps_pwr_ofs * |
| eq_reg_td_tps_pwr_ofs); |
| /* log(x) x = 16bits * 7bits->23 bits */ |
| b = log10times100(eq_reg_td_req_smb_cnt * tps_cnt); |
| /* log(x) x = (16bits + 16bits) << 15 ->32 bits */ |
| c = log10times100(sqr_err_iq); |
| |
| i_mer = a + b - c; |
| } |
| *p_signal_to_noise = i_mer; |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int get_signal_to_noise(struct drxk_state *state, s32 *p_signal_to_noise) |
| { |
| dprintk(1, "\n"); |
| |
| *p_signal_to_noise = 0; |
| switch (state->m_operation_mode) { |
| case OM_DVBT: |
| return get_dvbt_signal_to_noise(state, p_signal_to_noise); |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| return get_qam_signal_to_noise(state, p_signal_to_noise); |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| #if 0 |
| static int get_dvbt_quality(struct drxk_state *state, s32 *p_quality) |
| { |
| /* SNR Values for quasi errorfree reception rom Nordig 2.2 */ |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| static s32 QE_SN[] = { |
| 51, /* QPSK 1/2 */ |
| 69, /* QPSK 2/3 */ |
| 79, /* QPSK 3/4 */ |
| 89, /* QPSK 5/6 */ |
| 97, /* QPSK 7/8 */ |
| 108, /* 16-QAM 1/2 */ |
| 131, /* 16-QAM 2/3 */ |
| 146, /* 16-QAM 3/4 */ |
| 156, /* 16-QAM 5/6 */ |
| 160, /* 16-QAM 7/8 */ |
| 165, /* 64-QAM 1/2 */ |
| 187, /* 64-QAM 2/3 */ |
| 202, /* 64-QAM 3/4 */ |
| 216, /* 64-QAM 5/6 */ |
| 225, /* 64-QAM 7/8 */ |
| }; |
| |
| *p_quality = 0; |
| |
| do { |
| s32 signal_to_noise = 0; |
| u16 constellation = 0; |
| u16 code_rate = 0; |
| u32 signal_to_noise_rel; |
| u32 ber_quality; |
| |
| status = get_dvbt_signal_to_noise(state, &signal_to_noise); |
| if (status < 0) |
| break; |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, |
| &constellation); |
| if (status < 0) |
| break; |
| constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M; |
| |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, |
| &code_rate); |
| if (status < 0) |
| break; |
| code_rate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M; |
| |
| if (constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM || |
| code_rate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8) |
| break; |
| signal_to_noise_rel = signal_to_noise - |
| QE_SN[constellation * 5 + code_rate]; |
| ber_quality = 100; |
| |
| if (signal_to_noise_rel < -70) |
| *p_quality = 0; |
| else if (signal_to_noise_rel < 30) |
| *p_quality = ((signal_to_noise_rel + 70) * |
| ber_quality) / 100; |
| else |
| *p_quality = ber_quality; |
| } while (0); |
| return 0; |
| }; |
| |
| static int get_dvbc_quality(struct drxk_state *state, s32 *p_quality) |
| { |
| int status = 0; |
| *p_quality = 0; |
| |
| dprintk(1, "\n"); |
| |
| do { |
| u32 signal_to_noise = 0; |
| u32 ber_quality = 100; |
| u32 signal_to_noise_rel = 0; |
| |
| status = get_qam_signal_to_noise(state, &signal_to_noise); |
| if (status < 0) |
| break; |
| |
| switch (state->props.modulation) { |
| case QAM_16: |
| signal_to_noise_rel = signal_to_noise - 200; |
| break; |
| case QAM_32: |
| signal_to_noise_rel = signal_to_noise - 230; |
| break; /* Not in NorDig */ |
| case QAM_64: |
| signal_to_noise_rel = signal_to_noise - 260; |
| break; |
| case QAM_128: |
| signal_to_noise_rel = signal_to_noise - 290; |
| break; |
| default: |
| case QAM_256: |
| signal_to_noise_rel = signal_to_noise - 320; |
| break; |
| } |
| |
| if (signal_to_noise_rel < -70) |
| *p_quality = 0; |
| else if (signal_to_noise_rel < 30) |
| *p_quality = ((signal_to_noise_rel + 70) * |
| ber_quality) / 100; |
| else |
| *p_quality = ber_quality; |
| } while (0); |
| |
| return status; |
| } |
| |
| static int get_quality(struct drxk_state *state, s32 *p_quality) |
| { |
| dprintk(1, "\n"); |
| |
| switch (state->m_operation_mode) { |
| case OM_DVBT: |
| return get_dvbt_quality(state, p_quality); |
| case OM_QAM_ITU_A: |
| return get_dvbc_quality(state, p_quality); |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* Free data ram in SIO HI */ |
| #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 |
| #define SIO_HI_RA_RAM_USR_END__A 0x420060 |
| |
| #define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) |
| #define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) |
| #define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ |
| #define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE |
| |
| #define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F) |
| #define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F) |
| #define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF) |
| |
| static int ConfigureI2CBridge(struct drxk_state *state, bool b_enable_bridge) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) |
| return 0; |
| if (state->m_drxk_state == DRXK_POWERED_DOWN) |
| goto error; |
| |
| if (state->no_i2c_bridge) |
| return 0; |
| |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, |
| SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); |
| if (status < 0) |
| goto error; |
| if (b_enable_bridge) { |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, |
| SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED); |
| if (status < 0) |
| goto error; |
| } else { |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, |
| SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN); |
| if (status < 0) |
| goto error; |
| } |
| |
| status = hi_command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, NULL); |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int set_pre_saw(struct drxk_state *state, |
| struct s_cfg_pre_saw *p_pre_saw_cfg) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if ((p_pre_saw_cfg == NULL) |
| || (p_pre_saw_cfg->reference > IQM_AF_PDREF__M)) |
| goto error; |
| |
| status = write16(state, IQM_AF_PDREF__A, p_pre_saw_cfg->reference); |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int bl_direct_cmd(struct drxk_state *state, u32 target_addr, |
| u16 rom_offset, u16 nr_of_elements, u32 time_out) |
| { |
| u16 bl_status = 0; |
| u16 offset = (u16) ((target_addr >> 0) & 0x00FFFF); |
| u16 blockbank = (u16) ((target_addr >> 16) & 0x000FFF); |
| int status; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| |
| mutex_lock(&state->mutex); |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_TGT_HDR__A, blockbank); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_TGT_ADDR__A, offset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_SRC_ADDR__A, rom_offset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_SRC_LEN__A, nr_of_elements); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); |
| if (status < 0) |
| goto error; |
| |
| end = jiffies + msecs_to_jiffies(time_out); |
| do { |
| status = read16(state, SIO_BL_STATUS__A, &bl_status); |
| if (status < 0) |
| goto error; |
| } while ((bl_status == 0x1) && time_is_after_jiffies(end)); |
| if (bl_status == 0x1) { |
| pr_err("SIO not ready\n"); |
| status = -EINVAL; |
| goto error2; |
| } |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| |
| } |
| |
| static int adc_sync_measurement(struct drxk_state *state, u16 *count) |
| { |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* start measurement */ |
| status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_START_LOCK__A, 1); |
| if (status < 0) |
| goto error; |
| |
| *count = 0; |
| status = read16(state, IQM_AF_PHASE0__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| status = read16(state, IQM_AF_PHASE1__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| status = read16(state, IQM_AF_PHASE2__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int adc_synchronization(struct drxk_state *state) |
| { |
| u16 count = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| status = adc_sync_measurement(state, &count); |
| if (status < 0) |
| goto error; |
| |
| if (count == 1) { |
| /* Try sampling on a different edge */ |
| u16 clk_neg = 0; |
| |
| status = read16(state, IQM_AF_CLKNEG__A, &clk_neg); |
| if (status < 0) |
| goto error; |
| if ((clk_neg & IQM_AF_CLKNEG_CLKNEGDATA__M) == |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) { |
| clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); |
| clk_neg |= |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG; |
| } else { |
| clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); |
| clk_neg |= |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS; |
| } |
| status = write16(state, IQM_AF_CLKNEG__A, clk_neg); |
| if (status < 0) |
| goto error; |
| status = adc_sync_measurement(state, &count); |
| if (status < 0) |
| goto error; |
| } |
| |
| if (count < 2) |
| status = -EINVAL; |
| error: |
| if (status < 0) |
| pr_err("Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int set_frequency_shifter(struct drxk_state *state, |
| u16 intermediate_freqk_hz, |
| s32 tuner_freq_offset, bool is_dtv) |
| { |
| bool select_pos_image = false; |
| u32 rf_freq_residual = tuner_freq_offset; |
| u32 fm_frequency_shift = 0; |
| bool tuner_mirror = !state->m_b_mirror_freq_spect; |
| u32 adc_freq; |
| bool adc_flip; |
| int status; |
| u32 if_freq_actual; |
| u32 sampling_frequency = (u32) (state->m_sys_clock_freq / 3); |
| u32 frequency_shift; |
| bool image_to_select; |
| |
| dprintk(1, "\n"); |
| |
| /* |
| Program frequency shifter |
| No need to account for mirroring on RF |
| */ |
| if (is_dtv) { |
| if ((state->m_operation_mode == OM_QAM_ITU_A) || |
| (state->m_operation_mode == OM_QAM_ITU_C) || |
| (state->m_operation_mode == OM_DVBT)) |
| select_pos_image = true; |
|