| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * |
| ******************************************************************************/ |
| #define _HAL_INIT_C_ |
| |
| #include <linux/firmware.h> |
| #include <linux/vmalloc.h> |
| #include <drv_types.h> |
| #include <rtw_efuse.h> |
| #include <phy.h> |
| #include <rtl8188e_hal.h> |
| |
| #include <rtw_iol.h> |
| |
| void iol_mode_enable(struct adapter *padapter, u8 enable) |
| { |
| u8 reg_0xf0 = 0; |
| |
| if (enable) { |
| /* Enable initial offload */ |
| reg_0xf0 = usb_read8(padapter, REG_SYS_CFG); |
| usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN); |
| |
| if (!padapter->bFWReady) { |
| DBG_88E("bFWReady == false call reset 8051...\n"); |
| _8051Reset88E(padapter); |
| } |
| |
| } else { |
| /* disable initial offload */ |
| reg_0xf0 = usb_read8(padapter, REG_SYS_CFG); |
| usb_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN); |
| } |
| } |
| |
| s32 iol_execute(struct adapter *padapter, u8 control) |
| { |
| s32 status = _FAIL; |
| u8 reg_0x88 = 0; |
| u32 start = 0, passing_time = 0; |
| |
| control = control&0x0f; |
| reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0); |
| usb_write8(padapter, REG_HMEBOX_E0, reg_0x88|control); |
| |
| start = jiffies; |
| while ((reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0)) & control && |
| (passing_time = rtw_get_passing_time_ms(start)) < 1000) { |
| ; |
| } |
| |
| reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0); |
| status = (reg_0x88 & control) ? _FAIL : _SUCCESS; |
| if (reg_0x88 & control<<4) |
| status = _FAIL; |
| return status; |
| } |
| |
| static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) |
| { |
| s32 rst = _SUCCESS; |
| iol_mode_enable(padapter, 1); |
| usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy); |
| rst = iol_execute(padapter, CMD_INIT_LLT); |
| iol_mode_enable(padapter, 0); |
| return rst; |
| } |
| |
| |
| s32 rtl8188e_iol_efuse_patch(struct adapter *padapter) |
| { |
| s32 result = _SUCCESS; |
| |
| DBG_88E("==> %s\n", __func__); |
| if (rtw_IOL_applied(padapter)) { |
| iol_mode_enable(padapter, 1); |
| result = iol_execute(padapter, CMD_READ_EFUSE_MAP); |
| if (result == _SUCCESS) |
| result = iol_execute(padapter, CMD_EFUSE_PATCH); |
| |
| iol_mode_enable(padapter, 0); |
| } |
| return result; |
| } |
| |
| #define MAX_REG_BOLCK_SIZE 196 |
| |
| void _8051Reset88E(struct adapter *padapter) |
| { |
| u8 u1bTmp; |
| |
| u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN+1); |
| usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2)); |
| usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2)); |
| DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n"); |
| } |
| |
| void rtl8188e_InitializeFirmwareVars(struct adapter *padapter) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); |
| |
| /* Init Fw LPS related. */ |
| padapter->pwrctrlpriv.bFwCurrentInPSMode = false; |
| |
| /* Init H2C counter. by tynli. 2009.12.09. */ |
| pHalData->LastHMEBoxNum = 0; |
| } |
| |
| static void rtl8188e_free_hal_data(struct adapter *padapter) |
| { |
| kfree(padapter->HalData); |
| padapter->HalData = NULL; |
| } |
| |
| static struct HAL_VERSION ReadChipVersion8188E(struct adapter *padapter) |
| { |
| u32 value32; |
| struct HAL_VERSION ChipVersion; |
| struct hal_data_8188e *pHalData; |
| |
| pHalData = GET_HAL_DATA(padapter); |
| |
| value32 = usb_read32(padapter, REG_SYS_CFG); |
| ChipVersion.ICType = CHIP_8188E; |
| ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP); |
| |
| ChipVersion.RFType = RF_TYPE_1T1R; |
| ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC); |
| ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /* IC version (CUT) */ |
| |
| /* For regulator mode. by tynli. 2011.01.14 */ |
| pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR); |
| |
| ChipVersion.ROMVer = 0; /* ROM code version. */ |
| |
| dump_chip_info(ChipVersion); |
| |
| pHalData->VersionID = ChipVersion; |
| |
| if (IS_1T2R(ChipVersion)) { |
| pHalData->rf_type = RF_1T2R; |
| pHalData->NumTotalRFPath = 2; |
| } else if (IS_2T2R(ChipVersion)) { |
| pHalData->rf_type = RF_2T2R; |
| pHalData->NumTotalRFPath = 2; |
| } else{ |
| pHalData->rf_type = RF_1T1R; |
| pHalData->NumTotalRFPath = 1; |
| } |
| |
| MSG_88E("RF_Type is %x!!\n", pHalData->rf_type); |
| |
| return ChipVersion; |
| } |
| |
| static void rtl8188e_read_chip_version(struct adapter *padapter) |
| { |
| ReadChipVersion8188E(padapter); |
| } |
| |
| static void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); |
| struct odm_dm_struct *podmpriv = &pHalData->odmpriv; |
| switch (eVariable) { |
| case HAL_ODM_STA_INFO: |
| { |
| struct sta_info *psta = pValue1; |
| |
| if (bSet) { |
| DBG_88E("### Set STA_(%d) info\n", psta->mac_id); |
| ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta); |
| ODM_RAInfo_Init(podmpriv, psta->mac_id); |
| } else { |
| DBG_88E("### Clean STA_(%d) info\n", psta->mac_id); |
| ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL); |
| } |
| } |
| break; |
| case HAL_ODM_P2P_STATE: |
| ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet); |
| break; |
| case HAL_ODM_WIFI_DISPLAY_STATE: |
| ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void hal_notch_filter_8188e(struct adapter *adapter, bool enable) |
| { |
| if (enable) { |
| DBG_88E("Enable notch filter\n"); |
| usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) | BIT1); |
| } else { |
| DBG_88E("Disable notch filter\n"); |
| usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1); |
| } |
| } |
| void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc) |
| { |
| pHalFunc->free_hal_data = &rtl8188e_free_hal_data; |
| |
| pHalFunc->dm_init = &rtl8188e_init_dm_priv; |
| |
| pHalFunc->read_chip_version = &rtl8188e_read_chip_version; |
| |
| pHalFunc->set_bwmode_handler = &phy_set_bw_mode; |
| pHalFunc->set_channel_handler = &phy_sw_chnl; |
| |
| pHalFunc->hal_dm_watchdog = &rtl8188e_HalDmWatchDog; |
| |
| pHalFunc->Add_RateATid = &rtl8188e_Add_RateATid; |
| |
| pHalFunc->AntDivBeforeLinkHandler = &AntDivBeforeLink8188E; |
| pHalFunc->AntDivCompareHandler = &AntDivCompare8188E; |
| pHalFunc->read_rfreg = &phy_query_rf_reg; |
| pHalFunc->write_rfreg = &phy_set_rf_reg; |
| |
| pHalFunc->sreset_init_value = &sreset_init_value; |
| pHalFunc->sreset_get_wifi_status = &sreset_get_wifi_status; |
| |
| pHalFunc->SetHalODMVarHandler = &rtl8188e_SetHalODMVar; |
| |
| pHalFunc->hal_notch_filter = &hal_notch_filter_8188e; |
| } |
| |
| /* */ |
| /* */ |
| /* LLT R/W/Init function */ |
| /* */ |
| /* */ |
| static s32 _LLTWrite(struct adapter *padapter, u32 address, u32 data) |
| { |
| s32 status = _SUCCESS; |
| s32 count = 0; |
| u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); |
| u16 LLTReg = REG_LLT_INIT; |
| |
| usb_write32(padapter, LLTReg, value); |
| |
| /* polling */ |
| do { |
| value = usb_read32(padapter, LLTReg); |
| if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) |
| break; |
| |
| if (count > POLLING_LLT_THRESHOLD) { |
| RT_TRACE(_module_hal_init_c_, _drv_err_, ("Failed to polling write LLT done at address %d!\n", address)); |
| status = _FAIL; |
| break; |
| } |
| } while (count++); |
| |
| return status; |
| } |
| |
| s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) |
| { |
| s32 status = _FAIL; |
| u32 i; |
| u32 Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;/* 176, 22k */ |
| |
| if (rtw_IOL_applied(padapter)) { |
| status = iol_InitLLTTable(padapter, txpktbuf_bndy); |
| } else { |
| for (i = 0; i < (txpktbuf_bndy - 1); i++) { |
| status = _LLTWrite(padapter, i, i + 1); |
| if (_SUCCESS != status) |
| return status; |
| } |
| |
| /* end of list */ |
| status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF); |
| if (_SUCCESS != status) |
| return status; |
| |
| /* Make the other pages as ring buffer */ |
| /* This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. */ |
| /* Otherwise used as local loopback buffer. */ |
| for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) { |
| status = _LLTWrite(padapter, i, (i + 1)); |
| if (_SUCCESS != status) |
| return status; |
| } |
| |
| /* Let last entry point to the start entry of ring buffer */ |
| status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy); |
| if (_SUCCESS != status) { |
| return status; |
| } |
| } |
| |
| return status; |
| } |
| |
| void |
| Hal_InitPGData88E(struct adapter *padapter) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| |
| if (!pEEPROM->bautoload_fail_flag) { /* autoload OK. */ |
| if (!is_boot_from_eeprom(padapter)) { |
| /* Read EFUSE real map to shadow. */ |
| EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI); |
| } |
| } else {/* autoload fail */ |
| RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n")); |
| /* update to default value 0xFF */ |
| if (!is_boot_from_eeprom(padapter)) |
| EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI); |
| } |
| } |
| |
| void |
| Hal_EfuseParseIDCode88E( |
| struct adapter *padapter, |
| u8 *hwinfo |
| ) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| u16 EEPROMId; |
| |
| /* Checl 0x8129 again for making sure autoload status!! */ |
| EEPROMId = le16_to_cpu(*((__le16 *)hwinfo)); |
| if (EEPROMId != RTL_EEPROM_ID) { |
| DBG_88E("EEPROM ID(%#x) is invalid!!\n", EEPROMId); |
| pEEPROM->bautoload_fail_flag = true; |
| } else { |
| pEEPROM->bautoload_fail_flag = false; |
| } |
| |
| DBG_88E("EEPROM ID = 0x%04x\n", EEPROMId); |
| } |
| |
| static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G, u8 *PROMContent, bool AutoLoadFail) |
| { |
| u32 rfPath, eeAddr = EEPROM_TX_PWR_INX_88E, group, TxCount = 0; |
| |
| memset(pwrInfo24G, 0, sizeof(struct txpowerinfo24g)); |
| |
| if (AutoLoadFail) { |
| for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) { |
| /* 2.4G default value */ |
| for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { |
| pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; |
| pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; |
| } |
| for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { |
| if (TxCount == 0) { |
| pwrInfo24G->BW20_Diff[rfPath][0] = EEPROM_DEFAULT_24G_HT20_DIFF; |
| pwrInfo24G->OFDM_Diff[rfPath][0] = EEPROM_DEFAULT_24G_OFDM_DIFF; |
| } else { |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| } |
| } |
| } |
| return; |
| } |
| |
| for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) { |
| /* 2.4G default value */ |
| for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { |
| pwrInfo24G->IndexCCK_Base[rfPath][group] = PROMContent[eeAddr++]; |
| if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF) |
| pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; |
| } |
| for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) { |
| pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++]; |
| if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF) |
| pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; |
| } |
| for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { |
| if (TxCount == 0) { |
| pwrInfo24G->BW40_Diff[rfPath][TxCount] = 0; |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF; |
| } else { |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; |
| if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF; |
| } else { |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); |
| if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0; |
| eeAddr++; |
| } else { |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| } else { |
| pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; |
| if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| } else { |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); |
| if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| eeAddr++; |
| |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| } else { |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; |
| if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| |
| if (PROMContent[eeAddr] == 0xFF) { |
| pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; |
| } else { |
| pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); |
| if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ |
| pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0; |
| } |
| eeAddr++; |
| } |
| } |
| } |
| } |
| |
| static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup) |
| { |
| u8 bIn24G = true; |
| |
| if (chnl <= 14) { |
| bIn24G = true; |
| |
| if (chnl < 3) /* Channel 1-2 */ |
| *pGroup = 0; |
| else if (chnl < 6) /* Channel 3-5 */ |
| *pGroup = 1; |
| else if (chnl < 9) /* Channel 6-8 */ |
| *pGroup = 2; |
| else if (chnl < 12) /* Channel 9-11 */ |
| *pGroup = 3; |
| else if (chnl < 14) /* Channel 12-13 */ |
| *pGroup = 4; |
| else if (chnl == 14) /* Channel 14 */ |
| *pGroup = 5; |
| } else { |
| bIn24G = false; |
| |
| if (chnl <= 40) |
| *pGroup = 0; |
| else if (chnl <= 48) |
| *pGroup = 1; |
| else if (chnl <= 56) |
| *pGroup = 2; |
| else if (chnl <= 64) |
| *pGroup = 3; |
| else if (chnl <= 104) |
| *pGroup = 4; |
| else if (chnl <= 112) |
| *pGroup = 5; |
| else if (chnl <= 120) |
| *pGroup = 5; |
| else if (chnl <= 128) |
| *pGroup = 6; |
| else if (chnl <= 136) |
| *pGroup = 7; |
| else if (chnl <= 144) |
| *pGroup = 8; |
| else if (chnl <= 153) |
| *pGroup = 9; |
| else if (chnl <= 161) |
| *pGroup = 10; |
| else if (chnl <= 177) |
| *pGroup = 11; |
| } |
| return bIn24G; |
| } |
| |
| void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| if (AutoLoadFail) { |
| padapter->pwrctrlpriv.bHWPowerdown = false; |
| padapter->pwrctrlpriv.bSupportRemoteWakeup = false; |
| } else { |
| /* hw power down mode selection , 0:rf-off / 1:power down */ |
| |
| if (padapter->registrypriv.hwpdn_mode == 2) |
| padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT4); |
| else |
| padapter->pwrctrlpriv.bHWPowerdown = padapter->registrypriv.hwpdn_mode; |
| |
| /* decide hw if support remote wakeup function */ |
| /* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */ |
| padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false; |
| |
| DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__, |
| padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown , padapter->pwrctrlpriv.bSupportRemoteWakeup); |
| |
| DBG_88E("### PS params => power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable); |
| } |
| } |
| |
| void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); |
| struct txpowerinfo24g pwrInfo24G; |
| u8 rfPath, ch, group; |
| u8 bIn24G, TxCount; |
| |
| Hal_ReadPowerValueFromPROM_8188E(&pwrInfo24G, PROMContent, AutoLoadFail); |
| |
| if (!AutoLoadFail) |
| pHalData->bTXPowerDataReadFromEEPORM = true; |
| |
| for (rfPath = 0; rfPath < pHalData->NumTotalRFPath; rfPath++) { |
| for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) { |
| bIn24G = Hal_GetChnlGroup88E(ch, &group); |
| if (bIn24G) { |
| pHalData->Index24G_CCK_Base[rfPath][ch] = pwrInfo24G.IndexCCK_Base[rfPath][group]; |
| if (ch == 14) |
| pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][4]; |
| else |
| pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][group]; |
| } |
| if (bIn24G) { |
| DBG_88E("======= Path %d, Channel %d =======\n", rfPath, ch); |
| DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_CCK_Base[rfPath][ch]); |
| DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_BW40_Base[rfPath][ch]); |
| } |
| } |
| for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { |
| pHalData->CCK_24G_Diff[rfPath][TxCount] = pwrInfo24G.CCK_Diff[rfPath][TxCount]; |
| pHalData->OFDM_24G_Diff[rfPath][TxCount] = pwrInfo24G.OFDM_Diff[rfPath][TxCount]; |
| pHalData->BW20_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW20_Diff[rfPath][TxCount]; |
| pHalData->BW40_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW40_Diff[rfPath][TxCount]; |
| DBG_88E("======= TxCount %d =======\n", TxCount); |
| DBG_88E("CCK_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->CCK_24G_Diff[rfPath][TxCount]); |
| DBG_88E("OFDM_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->OFDM_24G_Diff[rfPath][TxCount]); |
| DBG_88E("BW20_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW20_24G_Diff[rfPath][TxCount]); |
| DBG_88E("BW40_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW40_24G_Diff[rfPath][TxCount]); |
| } |
| } |
| |
| /* 2010/10/19 MH Add Regulator recognize for CU. */ |
| if (!AutoLoadFail) { |
| pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */ |
| if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) |
| pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */ |
| } else { |
| pHalData->EEPROMRegulatory = 0; |
| } |
| DBG_88E("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory); |
| } |
| |
| void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); |
| |
| if (!AutoLoadFail) { |
| pHalData->CrystalCap = hwinfo[EEPROM_XTAL_88E]; |
| if (pHalData->CrystalCap == 0xFF) |
| pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; |
| } else { |
| pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; |
| } |
| DBG_88E("CrystalCap: 0x%2x\n", pHalData->CrystalCap); |
| } |
| |
| void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); |
| |
| if (!AutoLoadFail) |
| pHalData->BoardType = (hwinfo[EEPROM_RF_BOARD_OPTION_88E] |
| & 0xE0) >> 5; |
| else |
| pHalData->BoardType = 0; |
| DBG_88E("Board Type: 0x%2x\n", pHalData->BoardType); |
| } |
| |
| void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); |
| |
| if (!AutoLoadFail) { |
| pHalData->EEPROMVersion = hwinfo[EEPROM_VERSION_88E]; |
| if (pHalData->EEPROMVersion == 0xFF) |
| pHalData->EEPROMVersion = EEPROM_Default_Version; |
| } else { |
| pHalData->EEPROMVersion = 1; |
| } |
| RT_TRACE(_module_hci_hal_init_c_, _drv_info_, |
| ("Hal_EfuseParseEEPROMVer(), EEVer = %d\n", |
| pHalData->EEPROMVersion)); |
| } |
| |
| void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| padapter->mlmepriv.ChannelPlan = |
| hal_com_get_channel_plan(padapter, |
| hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF, |
| padapter->registrypriv.channel_plan, |
| RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail); |
| |
| DBG_88E("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan); |
| } |
| |
| void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); |
| |
| if (!AutoLoadFail) { |
| pHalData->EEPROMCustomerID = hwinfo[EEPROM_CUSTOMERID_88E]; |
| } else { |
| pHalData->EEPROMCustomerID = 0; |
| pHalData->EEPROMSubCustomerID = 0; |
| } |
| DBG_88E("EEPROM Customer ID: 0x%2x\n", pHalData->EEPROMCustomerID); |
| } |
| |
| void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); |
| struct registry_priv *registry_par = &pAdapter->registrypriv; |
| |
| if (!AutoLoadFail) { |
| /* Antenna Diversity setting. */ |
| if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */ |
| pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3; |
| if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) |
| pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3; |
| } else { |
| pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */ |
| } |
| |
| if (registry_par->antdiv_type == 0) { |
| /* If TRxAntDivType is AUTO in advanced setting, use EFUSE value instead. */ |
| pHalData->TRxAntDivType = PROMContent[EEPROM_RF_ANTENNA_OPT_88E]; |
| if (pHalData->TRxAntDivType == 0xFF) |
| pHalData->TRxAntDivType = CG_TRX_HW_ANTDIV; /* For 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */ |
| } else { |
| pHalData->TRxAntDivType = registry_par->antdiv_type; |
| } |
| |
| if (pHalData->TRxAntDivType == CG_TRX_HW_ANTDIV || pHalData->TRxAntDivType == CGCS_RX_HW_ANTDIV) |
| pHalData->AntDivCfg = 1; /* 0xC1[3] is ignored. */ |
| } else { |
| pHalData->AntDivCfg = 0; |
| pHalData->TRxAntDivType = pHalData->TRxAntDivType; /* The value in the driver setting of device manager. */ |
| } |
| DBG_88E("EEPROM : AntDivCfg = %x, TRxAntDivType = %x\n", pHalData->AntDivCfg, pHalData->TRxAntDivType); |
| } |
| |
| void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail) |
| { |
| struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); |
| |
| /* ThermalMeter from EEPROM */ |
| if (!AutoloadFail) |
| pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_88E]; |
| else |
| pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; |
| |
| if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail) { |
| pHalData->bAPKThermalMeterIgnore = true; |
| pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; |
| } |
| DBG_88E("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter); |
| } |
