blob: 952f6c96bab903deb9df684ef63a059b9900076d [file] [log] [blame]
Qualcomm APQ8064 SATA PHY Controller
------------------------------------
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
- compatible: compatible list, contains "qcom,apq8064-sata-phy".
- reg: offset and length of the SATA PHY register set;
- #phy-cells: must be zero
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
clock-names.
- clock-names: must be "cfg" for phy config clock.
Example:
sata_phy: sata-phy@1b400000 {
compatible = "qcom,apq8064-sata-phy";
reg = <0x1b400000 0x200>;
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
};