| * Freescale MXS USB Phy Device |
| |
| Required properties: |
| - compatible: should contain: |
| * "fsl,imx23-usbphy" for imx23 and imx28 |
| * "fsl,imx6q-usbphy" for imx6dq and imx6dl |
| * "fsl,imx6sl-usbphy" for imx6sl |
| * "fsl,vf610-usbphy" for Vybrid vf610 |
| * "fsl,imx6sx-usbphy" for imx6sx |
| * "fsl,imx6ul-usbphy" for imx6ul |
| "fsl,imx23-usbphy" is still a fallback for other strings |
| - reg: Should contain registers location and length |
| - interrupts: Should contain phy interrupt |
| - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series |
| |
| Optional properties: |
| - tx-d-cal: Try to adjust this value to improve signal quality, and pass |
| USB Certification, the value is from 0x0 to 0xf, and the register offset |
| is 0x10 (USBPHY_TX). |
| |
| Example: |
| usbphy1: usbphy@020c9000 { |
| compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x020c9000 0x1000>; |
| interrupts = <0 44 0x04>; |
| fsl,anatop = <&anatop>; |
| tx-d-cal = <0x5>; |
| }; |
