blob: 33fd3543f3f84e55cd9b5d380caea5805cccfb43 [file] [log] [blame]
SAMSUNG USB-PHY controllers
** Samsung's usb 2.0 phy transceiver
The Samsung's usb 2.0 phy transceiver is used for controlling
usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
usb controllers across Samsung SOCs.
TODO: Adding the PHY binding with controller(s) according to the under
development generic PHY driver.
Required properties:
Exynos4210:
- compatible : should be "samsung,exynos4210-usb2phy"
- reg : base physical address of the phy registers and length of memory mapped
region.
- clocks: Clock IDs array as required by the controller.
- clock-names: names of clock correseponding IDs clock property as requested
by the controller driver.
Exynos5250:
- compatible : should be "samsung,exynos5250-usb2phy"
- reg : base physical address of the phy registers and length of memory mapped
region.
Optional properties:
- #address-cells: should be '1' when usbphy node has a child node with 'reg'
property.
- #size-cells: should be '1' when usbphy node has a child node with 'reg'
property.
- ranges: allows valid translation between child's address space and parent's
address space.
- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
interface for usb-phy. It should provide the following information required by
usb-phy controller to control phy.
- reg : base physical address of PHY_CONTROL registers.
The size of this register is the total sum of size of all PHY_CONTROL
registers that the SoC has. For example, the size will be
'0x4' in case we have only one PHY_CONTROL register (e.g.
OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
and, '0x8' in case we have two PHY_CONTROL registers (e.g.
USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
and so on.
Example:
- Exynos4210
usbphy@125B0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "samsung,exynos4210-usb2phy";
reg = <0x125B0000 0x100>;
ranges;
clocks = <&clock 2>, <&clock 305>;
clock-names = "xusbxti", "otg";
usbphy-sys {
/* USB device and host PHY_CONTROL registers */
reg = <0x10020704 0x8>;
};
};
** Samsung's usb 3.0 phy transceiver
Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
controllers across Samsung SOCs.
Required properties:
Exynos5250:
- compatible : should be "samsung,exynos5250-usb3phy"
- reg : base physical address of the phy registers and length of memory mapped
region.
- clocks: Clock IDs array as required by the controller.
- clock-names: names of clocks correseponding to IDs in the clock property
as requested by the controller driver.
Optional properties:
- #address-cells: should be '1' when usbphy node has a child node with 'reg'
property.
- #size-cells: should be '1' when usbphy node has a child node with 'reg'
property.
- ranges: allows valid translation between child's address space and parent's
address space.
- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
interface for usb-phy. It should provide the following information required by
usb-phy controller to control phy.
- reg : base physical address of PHY_CONTROL registers.
The size of this register is the total sum of size of all PHY_CONTROL
registers that the SoC has. For example, the size will be
'0x4' in case we have only one PHY_CONTROL register (e.g.
OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
and, '0x8' in case we have two PHY_CONTROL registers (e.g.
USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
and so on.
Example:
usbphy@12100000 {
compatible = "samsung,exynos5250-usb3phy";
reg = <0x12100000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&clock 1>, <&clock 286>;
clock-names = "ext_xtal", "usbdrd30";
usbphy-sys {
/* USB device and host PHY_CONTROL registers */
reg = <0x10040704 0x8>;
};
};